Dexstar Steel Mini Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Powder Coat

See what our Experts say about this Dexstar Trailer Tires and Wheels

• Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
  I do have one hub that uses a .75" ( # LM11949) outer and a 1.25" ( # LM67048) inner bearing. This bearing combination is uncommon these days, but we have the hub # DX22XR. This is a 5 on 4-1/2" idler hub for a 2,500 lb axle. Bearings, seals, races, grease cap and lug nuts are all included. We also have a few sizes of wheels that will go with this; 15" wheel - # AM20422 14" wheel - # AM20365 13" wheel - # AM20253 12" wheel - # AM20132 We can also provide tires for any size trailer wheel...
  view full answer...
• Budget-Friendly 14 Inch Wheel For 205/75-14 Trailer Tire
  We have wheels for your 205/75-14 trailer tire, and that size tire fits 14" x 5" or 14" x 5-1/2" wheels, which is great because it will save you some money. There are a couple options for the most budget-friendly 14" diameter wheels: - Dexstar Steel Mini Mod Trailer Wheel # AM20365 - Dexstar Steel Spoke Trailer Wheel # AM20352 Both will also need Valve Stem # AM20904.
  view full answer...
• How Far Between the Back of the Wheels When Installed on the 60" Trailer Axle with Idler Hubs?
  There will be 54" between the backs of two of the Dexstar Steel Mini Mod Trailer Wheel item # AM20365 when installed on the 60" Trailer Axle with Idler Hubs item # e84YR. This is without the tires so when you add rubber to the item # AM20365 you should be closer to 52" or 53". Either way you'll have plenty of clearance and your wheels won't stick out too far and look weird.
  view full answer...
• Does Rim Width Matter for a 14 Wheel with a 5 on 4-1/2 Bolt Pattern
  Unless the tires that you have specifically state that you need to use a wheel with a certain width you will be just fine going with a 14" x 5-1/2" wheel like the Dexstar # AM20365 or a 14" x 6" wheel like the Americana # AM20364. Either of these is compatible with your Cargo Mate trailer as they also have the 5 on 4-1/2" bolt pattern. If you don't already have tires and you are looking for tire and wheel combinations then I highly recommend going with a Goodyear Endurance tire and Dexstar...
  view full answer...
• What is the Difference Between the Dexstar Mini Mod Wheels and the Steel Spoke Wheels
  Both the Dexstar Steel Spoke Trailer Wheel # AM20352 and the Dexstar Steel Mini Mod Trailer Wheel # AM20365 that you referenced are made of the same material and have the same powdercoat finish so either would be just as great as the other when being submerged. If I were you I would pick the design that you think looks better since aside from that the wheels are identical. I attached review videos for both wheels for you to check out as well.
  view full answer...
• Recommended Trailer Tires for Boat Trailer with 14 Inch Wheels
  We don't have any tires that are 185R14 size. For a similar size I recommend the Karrier ST205/75R14 Radial Trailer Tire - Load Range D # AM10235. These tires will fit 14" x 5", 14" x 5-1/2", 14" x 6", and 14" x 6-1/2" wheels so you won't need to replace your wheels. These tires are rated for 2,200 lbs at 75 psi and speeds up to 81 mph. You will want to make sure your 14 inch wheels are rated for the 2,000 lb capacity as many of them are only rated for up to 1,870 lbs. We have Dexstar...
  view full answer...
• How Much Should Lug Nuts On Springdale Travel Trailer Be Torqued With 1/2" Studs and Steel Wheels?
  You are correct to be torqueing the lug nuts on your Springdale travel trailer to 100ft/lbs. 1/2" wheel studs with steel wheels are supposed to be torqued between 90-120ft/lbs(see chart below). I recommend having your brake drum inspected to determine if the studs are damaged and need to be replaced.
  view full answer...
  
• How to Measure a Trailer Rim
  Let's first start with measuring the bolt pattern. If a hub or wheel has an odd number of holes/studs then you measure from the center of one hole to the center point between the 2 holes across from it. If it had an even number you would measure center to center across the hub. If you measure from the center of one hole to the center of the hole next to it and you get 3-1/4 inches then it would be a 5 on 5-1/2 bolt pattern. You are trying to determine the bolt pattern when taking these...
  view full answer...
• Are 14 Inch Wheels Available With 5 On 5 Bolt Pattern
  The 14 inch wheels we carry have a 5 on 4-1/2 bolt pattern like part # AM20352. We also carry 14-inch tire/wheel combos with a 5 on 4-1/2 bolt pattern like part # TA65MR. I have attached links to the wheels and tire/wheel combos we do carry. I am not aware of any manufacturer that carries a 14-inch wheel with a 5 on 5 bolt pattern. We do offer 15-inch wheels with that bolt pattern. I have attached a link to the 15-inch wheels we offer you can take a look at.
  view full answer...
• Can Red and Blue Pin Stripes be Removed from a Trailer Wheel
  The red and blue pin striping on some wheels? Yes, you can take it off but it may damage the powder coat underneath. I recommend purchasing wheels without the pin stripe if that is what you are seeking. If a 14 x 5-1/2 inch wheel is an option for you then we have # AM20365 which is plain, no stripes. All 14 inch trailer tires (205/75-14 and 215/75-14) will fit on a 14 x 5-1/2 inch wheel so it is a viable option. I have linked a video review of this wheel for you.
  view full answer...
• What Size Rim is Needed for 205/75R14 Trailer Tire
  When it comes to a 205/75R14 trailer tire like the Kenda, # AM10234, this size of tire will fit a 5", 5-1/2", 6", or 6-1/2" rim. I spoke with our in-house tire expert and he said that when it comes to choosing a rim for a trailer tire, you will want to go with the smallest rim width available for your size of tire to keep the side walls as straight as possible. I have attached a link to the options that we have available for you. Since you plan to use this just as a spare for your boat...
  view full answer...
• Will 14 inch Diameter Trailer Wheels Fit On Rim that is 5-1/2 inches Wide
  Both of the standard trailer tire sizes for 14 inch wheels (205/75-14 and 215/75-14) are designed to fit a rim that is 5-1/2 inches wide. Those sizes also fit 6 inch wide rims too.
  view full answer...
• What Makes a Wheel Rated for Use on a Boat Trailer
  The Steel Modular Trailer Wheel part # AM20365 has a white powder coated finish. It can still be used on a boat trailer but it will not hold up well in due time. Boat trailer wheels are frequently submerged in both fresh and saltwater applications which makes them much more prone to rust and corrosion. Rust and corrosion will not only take the finish off of the wheel but it will also corrode the bead seat which will cause the tire to leak air. Instead, I recommend going with a wheel that...
  view full answer...
• How is a 5 on 4-1/2 Trailer Wheel Bolt Pattern Measured
  The 5 on 4-1/2 bolt pattern of a hub or wheel such as # AM20365 means that there are 5 lugs and, if you drew a circle that passed through the center of each lug the diameter would be 4-1/2 inches. I have included some links and a picture that will also help.
  view full answer...
  
• Where are the Taskmaster Steel Modular Trailer Wheels Manufactured
  If you are looking for a wheel that is made in the USA, then I recommend the Dexstar Steel Mini Mod Trailer Wheel, # AM20365. This steel wheel measures 14 x 5-1/2 and has a 5 on 4-1/2 bolt pattern. The wheel has a white powder coat finish and a weight capacity of 2,040 lbs.
  view full answer...
• How To Measure Wheel Size For Replacement Trailer Wheels
  The width of a trailer wheel is measured from the inner edge of a bead to the inner edge of the other bead. You will need to remove the tire from the wheel to get the most accurate measurement. Or, you can consider that a 205/75R14 trailer tire will fit a 5", 5-1/2", 6", or 6-1/2" rim and it is best to go with the smallest rim width available for your size of tire to keep the side walls as straight as possible. You will also need to verify your wheel's bolt pattern, it will probably be...
  view full answer...
  
• Lug Nut For Dexstar Steel Mini Mod Trailer Wheel
  For the Dexstar Steel Mini Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Powder Coat # AM20365 use a standard 60-degree acorn lug nut, and either of the following will work: - Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20 # AM90049 - Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel # LHLR103
  view full answer...
• Replacement White Trailer Wheel With No Tire
  There are a few different options for white rims to fit a 14" tire. Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Item # AM20334 Dexstar Steel Mini Mod Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Powder Coat Item # AM20365 Dexstar Steel Spoke Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Powder Coat Item # AM20352
  view full answer...
• 14 Inch Trailer Wheels Rated for 2040 Pounds at 65 PSI for ST205/75R14 Trailer Tires
  We have Dexstar wheel # AM20363 that will accept the 205/75-14 Load Range D tire. The wheel is rated for 2,040 lbs at 65 psi just like the tire. It has a 5 on 4-1/2 bolt pattern. Another option is white spoke wheel # AM20352 or white mini mod # AM20365. Or we have aluminum wheel # AM22330HWTB or # AM22329, both rated the same. If you need galvanized for corrosion resistance we have # AM20364. I have linked videos of all of these wheels for you.
  view full answer...
• Can the Dexstar Steel Mini Mod Wheels Handle 65-psi on Load Range D Tires
  Yes, the Dexstar Steel Mini Mod Trailer Wheel # AM20365 will work fine on Load Range D tires. Something like the Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Wheel - 5 on 4-1/2 - Load Range D # AM32161 is a tire/wheel combo with those specific wheels where the tires have a 75-lbs psi capacity, so there's really nothing to worry about with this application. You will want to make sure that your valve stems are rated for that application; since these don't come with valve stems included...
  view full answer...
• Weight Capacity for the Dexstar # AM20365
  The Steel Modular Trailer Wheel # AM20365 that you referenced has a 2,040 lbs capacity once you install a tire on it. The capacity would change if the tire you installed on the rim was less than it. I attached a link to a page that has all of the 14 inch tires we offer that would fit this rim.
  view full answer...
• What is the Offset for Taskmaster Steel Modular Trailer Wheel - 14 x 6 Rim - 5 on 4-1/2
  Trailer wheel # AM20365 has a zero offset. On our site, unless the description states otherwise, the wheel will have a zero offset. I have included a link to a video on this wheel for you.
  view full answer...
• Does Dexstar Steel Mini Mod Trailer Wheel Have Offset
  The Dexstar Steel Mini Mod Trailer Wheel, part # AM20365, has a zero offset, meaning the rim is centered on the wheel. This wheel has 10 modular holes and has a 5 on 4-1/2 bolt pattern. I have attached a link to a product review for this wheel.
  view full answer...
• How to Determine 5 Lug Bolt Pattern for 14 inch Wheel Based on Stud to Stud Dimension
  Are you sure the measurement you took wasn't slightly off possibly? Here are the stud to stud measurements and the bolt patterns they represent. Most likely it's 5 on 4-1/2 inch as that is the most popular bolt pattern like the part # AM20365. 2-5/8" - the bolt pattern is 5 on 4-1/2 2-3/4" - the bolt pattern is 5 on 4-3/4 3" - the bolt pattern is 5 on 5 3-1/4" - the bolt pattern is 5 on 5-1/2
  view full answer...

Do you have a question about this Trailer Tires and Wheel?