This 16" x 7" trailer wheel has an 8 on 6-1/2 bolt pattern and a 4.90" pilot hole diameter. The matte-black, rustproof aluminum wheel features a mesh design with a machined face.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Sendel 16 inch by 7 inch series T17 Matte-Black Aluminum Trailer Wheel with the 8 on 6 1/2 inch bolt pattern. Now this is an aluminum wheel. It's durable, lightweight, and rust proof, and, as we mentioned, it is the Sendel Series T17, which is a mesh-style design wheel with a matte-black finish to it. Also, if you notice, the front and the back of the wheel are all clear coated.
This wheel is a high-quality wheel, meets the DOT, Department of Transportation, specifications, and also the SAE J1204 standards. If you notice, this wheel does not come with a center cap. If you prefer to have one, we do sell those separately on our website. And you want to make sure to get a center cap that has the same diameter as the pilot hole in the wheel here 'cause when you install your center cap, it will install through this hole, and the diameter on this pilot hole is 4.9 inches. A few specs on this we're gonna measure is the diameter which is measured inside to inside.
So if we take our tape measure, and, if we go straight across, you'll be able to see there's your 16 inch diameter. The width we'll measure. This is also gonna be inside to inside or bead seat to bead seat. Put our ruler on that. You can see there's your 7 inch wide wheel.
Now this wheel does have a bolt pattern of 8 on 6 1/2 inches, and if you want to measure that on a wheel like this, that's an even number of lugs. It's pretty easy because if you notice the lug holes are directly across from each other. So when you go to measure it, just pick any hole, let's say this one, and you'll measure from the center of that hole directly across to the center of the hole across from it. On this, it'll measure 6 1/2 inches, so it means it's an 8 on 6 1/2 inch bolt pattern. This wheel will use a wheel lug size of 1/2 inch by 20, or 9/16 by 18, and the weight capacity on this wheel is 4,400 pounds.
But that should do it for the review on the Sendel 16 inch by 7 inch Series T17 Matte-Black Aluminum Trailer Wheel with the 8 on 6 1/2 inch bolt pattern.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.