bing tracking image
  1. Trailer Winch
  2. Dutton-Lainson
  3. Standard Hand Winch
  4. Boat Trailer Winch
  5. Utility Winch
  6. Wire Rope
  7. Polyester Strap
Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs

Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs

Item # DL14725
Retail:$161.13
Our Price: $123.51
You Save: $37.62
Trailer Winch
This item qualifies for Free Shipping
Shipping Weight: 12 lbs
Quantity: 
In Stock
Dutton-Lainson Standard Hand Winch - DL14725
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
This Dutton-Lainson 2-speed, heavy-duty winch is designed for multipurpose horizontal pulling operations. Great Prices for the best trailer winch from Dutton-Lainson. Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs part number DL14725 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dutton-Lainson Trailer Winch - DL14725

  • Standard Hand Winch
  • Boat Trailer Winch
  • Utility Winch
  • Wire Rope
  • Polyester Strap
  • Heavy Duty
  • Two Speed Winch
  • Dutton-Lainson
  • Standard Hand Crank

This Dutton-Lainson 2-speed, heavy-duty winch is designed for multipurpose horizontal pulling operations.


Features:

  • Heavy-duty winch is designed for horizontal pulling
  • High carbon steel gears
  • Permanently lubricated bearings
  • Ergonomic handle grip
  • Zinc TUFFPLATE finish
  • Handle included
  • Made in the USA


Specs:

  • Capacity: 2,000 lbs
  • 5-Year limited warranty


Double Speed Pulling Winch Specifications
ModelRated Capacity (2)Drum Hub DiameterGear RatioHandle LengthMax. Mechanical AdvantageReversible Ratchet2-Speed OperationMax. Drum Capacity - Cable (3)Max. Drum Capacity - Strap
DL147252,000 lb.1-1/8"12.4:1 / 5.4:19-1/2"168YesYes9/32" x 58'38'

(2) Capacity is based in direct pull on the third layer of line on the drum. Capacity is reduced as the line builds up on the drum.(3) Drum capacity based on cable size listed. (Cable is not included.)


Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.



14725 Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs - Model DL2000A

Installation Details DL14725 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs - DL14725

Average Customer Rating:  4.7 out of 5 stars   (16 Customer Reviews)

This Dutton-Lainson 2-speed, heavy-duty winch is designed for multipurpose horizontal pulling operations.

by:

By far the best you could get. I bought multiple ones and used all of them in different situations. If I didn’t have them I would have been in big trouble.




by:

The winches were received, but I see the they do not lock in both forward and reverse directions. I need the winch to lock in both winding directions. Can you please let me know what you recommend as replacement winches?


Comments
It looks like youre wanting a brake winch. A brake winch will hold the load in forward or reverse, and will not freewheel. If you use the provided link, you can see our ion of brake winches.
Mike L - 10/22/2018


by:

Thank goodness its made in America. Looks great. I will be using it for a boat. Haven't put it on trailer yet but it looks well made. Worth the extra money.




by:

Paula in the sales dept. was extremely helpful!!
she took my order and also issued a return for some other parts that I had ordered!!
Thank you Paula for your hard work and attention




by:

Replaced the same model winch on my boat trailer so mounting and fit was perfect, 2 speed gearing helps on steeper ramps and because it did not come with a strap I was able to pick the exact length for my application. Great price and support from eTrailer always and quick shipping.




by:

Decent two speed winch. A big improvement over the original single speed winch with just the right mechanical advantage for winching the boat up the final half of the trailer.


Comments
After a year of use in fresh-water bolted to a galvanized boat trailer, the winch base is beginning to rust. Im painting with galvanized paint to try and preserve it longer.
Rich - 10/19/2017


by:

Thanks etrailer. Got product on time and installed… back to the lake.




by:

Replaced this exact winch on my boat trailer which was original equipment and provided 18 years of service being used 200-300 days per year for a fishing charter business.




by:

Great product and awesome customer service. Will purchase again from etrailer.com




by:

Thank you for the excellent service and the prompt delivery of the exact product I was looking for. I will be looking your way again the next time I require trailer products to make my life easier.




by:

product arrived in short order and was what I wanted. good job. GCC




by:

I love this website! Service from etrailer is the best! I ordered this trailer winch on Thursday and it was delivered on Friday. Videos of your items are extremely helpful. I will shop this website again for sure.




by:

Fast shipping and winch worked great for replacing an old Shelby winch.




by:

Fits perfectly and works great.




by:

Thanks.




by:



16
16

See what our Experts say about this Dutton-Lainson Trailer Winch

  • Cable Length Capacity on the DL14725
    Good question. The Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs part # DL14725 is rated to hold 58 feet of 9/32" cable. That cable has a diameter is 3 times that of what you intend to use on it with the 3/16. With that said this winch should be able to handle 174 feet of the 3/16" cable that you require. Keep in mind that you would need to pay careful attention when spooling up the cable to ensure that it is tight and layered properly.
    view full answer...
  • How to Pick Out Boat Winch for 17 Foot Bay Boat
    Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with long winching distances and wooden bunks like what you currently have the ratio is 1 to 1. The Dutton-Lainson Hand Winch # DL14725 should work well for you. It has a 2,000 lb capacity and has a small enough mounting plate that it should fit...
    view full answer...
  • How to Choose a Replacement Hand Winch
    The correct winch for your needs will depend on several factors, such as what you're using the winch for, where you're using it and the amount of weight of the load. If by 'DL 2000' winch, you're meaning a Dutton-Lainson winch capable of pulling 2000 lbs, the # DL14725 would be an okay choice. However, that 2000 lb capacity is with one layer of rope/cable wrapped around the drum. With each subsequent layer, the capacity is reduced by 10 %. This is a two speed winch, with a gear ratio of...
    view full answer...
  • How to Pick Out a Winch for a Boat Trailer
    Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with long winching distances and wooden bunks like what you currently have the ratio is 1 to 1. The Dutton-Lainson Hand Winch # DL14725 should work well for you. It has a 2,000 lb capacity and has a small enough mounting plate that it should fit...
    view full answer...
  • Recommendation to Replace Shelby 5408 Trailer Winch
    If the gear is broken on your existing Shelby winch, I recommend simply replacing the entire unit, as Shelby is no longer in business and replacement parts are not readily available. To replace your Shelby 5408 model, I recommend the Dutton-Lainson Hand Winch with TUFFPLATE Finish # DL14725. This is very similar to your winch that features a 2,000 pound capacity and 2 speeds for horizontal pulling applications. The zinc TUFFPLATE finish will also do a great job of preventing rust and corrosion....
    view full answer...
  • Boat Trailer Winch Recommendation for 2,400 lb Console Boat
    Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with long winching distances and wooden bunks like what you currently have the ratio is 1 to 1. The Dutton-Lainson Hand Winch # DL14725 should work well for you. It has a 2,000 lb capacity and would make easy work of your 2,400 lb console boat.
    view full answer...
  • Does The Dutton-Lainson Hand Winch DL14725 Have The Same Overall Dimensions As A DL1802A
    The mounting pattern for the Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs # DL14725 you were looking at is the exact same as your current DL1802A, but the overall dimensions of the winches are different. The overall width of your DL1802A is 6-7/8" wide where the # DL14725 is narrower at 6-15/32" wide, but the # DL14725 is 8-13/16" long where your DL1802A is only 8-1/8" long. Without knowing the specifics of your cover I am not sure if it will work with...
    view full answer...
  • Can the Dutton-Lainson Worm Gear Hand Winch, # DL10970 be Used with a Strap
    The Dutton-Lainson Worm Gear Hand Winch, # DL10970, is designed for a cable no wider than 9/32 inches. If you had a strap that narrow, it could work, but the winch is not really designed for that application. A comparable winch that is rated for use with a strap is the Dutton-Lainson Trailer Winch, # DL14725. This winch has a drum capacity that can handle a strap 38 feet in length.
    view full answer...
  • How to Reverse the Winch Strap Feed from Top to Bottom on a Worm Gear or Standard Trailer Winch
    To get the cable to come off of the Dutton-Lainson Worm Gear Hand Winch, item # DL10974, you would need to crank the winch until the cable is all the way unwound from the winch drum and then continue cranking in the same direction until the cable is wound back onto the drum in the opposite direction it was wound before. This will reverse the feed of the cable from top to bottom or vice versa and will also reverse the direction the handle needs to be turned to winch a load with the winch. If...
    view full answer...
  • Recommended Strap for the Dutton-Lainson Hand Winch DL14725
    Yes, the Hand Winch Strap with Safety Hook part # DL24251 will work just fine with the Dutton-Lainson Hand Winch part # DL14725. However, please note that you will be limited to the weight capacity of the winch which is 2,000 lbs because it is lower than that of the strap which is 4,000 lbs but this won't cause any issues it is just something that you need to be conscious of.
    view full answer...
  • Winch Recommendation for Boat that Weighs 1,600 lbs
    Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with long winching distances and wooden bunks like what you currently have the ratio is 1 to 1. Based on your current 1,300 lb winch struggling with a 1,600 lb boat I'd recommend matching the winch capacity with at least the weight of your boat....
    view full answer...
  • Hand Winch Recommendation for Sailboat Trailer with Roller Bunks
    Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with long winching distances and wooden bunks the ratio is 1 to 1. So you have rollers and a long winching distance so 2 to 1 is the correct ratio. That means you would need a 1,500 lb winch at minimum. The Dutton-Lainson Hand Winch # DL14725...
    view full answer...
  • How to Pick Out Manual Boat Winch
    Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with long winching distances and wooden bunks like what you currently have the ratio is 1 to 1. The Dutton-Lainson Hand Winch # DL14725 should work well for you. It has a 2,000 lb capacity. Or the part # DL15440 that you referenced which has a...
    view full answer...
  • Recommended Hand Winch For 2,090 lb Pro Craft 180 Boat
    I did some research on the 1998 18 foot Pro Craft 180 and from what I could find it weighs about 2,090 lbs. If your trailer does not have rollers or wood bunks you will need a winch that is rated for half the weight of the boat. I recommend the The Dutton-Lainson Hand Winch # DL14725 with a 2,000 lb capacity which would be a bit more than you need. The ZINC plating will resist rust and 2 speed operation. It uses a polyester strap for which I recommend part # DL24249 which has a 4,000...
    view full answer...
    Image 1 for
  • Replacement Ratchet Spring for Dutton-Lainson Hand Winch DL2000A
    I have just what you need, the Winch Ratchet Repair Kit by Dutton-Lainson part # DL70475 which is a fit for the Dutton-Lainson Hand Winch part # DL14725 (DL2000A).
    view full answer...
  • Correct Replacement Winch Handle For Dutton-Lainson DL2000A Winch
    I was able to verify with the manufacturer, Dutton-Lainson, the exact replacement handle you need for your Dutton-Lainson 2000A winch, which is the following part number: - Replacement Quick Attach Winch Handle for Dutton Lainson Winch # DL70330
    view full answer...
  • Replacement Handle For Dutton-Lainson DL2000A Winch
    We do have the exact replacement handle you need for the Dutton-Lainson 2000A Hand Winch; the correct part is the following: - Replacement Quick Attach Winch Handle for Dutton Lainson Winch # DL70330
    view full answer...
  • Short 6 Inch Handle for Dutton-Lainson Winch DL2000A
    We do have a short 6 inch handle that will work with the model DL200A Dutton-Lainson Hand Winch # DL14725. The correct part is the Replacement Winch Handle for Dutton Lainson Winch - 6" # DL70336.
    view full answer...
    Image 1 for
  • Strap Recommendation for Dutton Lainson 2k Trailer Hand Winch
    The recommended strap for Dutton Lainson winch # DL14725 is a 25 foot long, 4,000 pound capacity strap, # DL24249. For a 20 foot strap with 4,000 pound capacity use # DL24242. You always want the strap to be at least 150 percent of the winch capacity for safety.
    view full answer...
  • What is the Bolt Hole Mounting Pattern for Dutton Lainson Trailer Hand Winch # DL14725
    I will be happy to show you the mounting hole dimensions for hand winch # DL14725. I have included a picture that shows them for you. This winch can be used with either a strap, # DL24249, or a cable # DL24104. Straps are much better for marine applications because they will not rust. The strap is rated for 4,000 pounds and the cable is rated for 3,500 pounds. You always want the cable or strap capacity to be at least 1.5 times greater than the winch capacity or higher for safety.
    view full answer...
    Image 1 for
  • Hand Winch Recommendation for Building a Homemade Log Arch
    You could use just about any type of hand winch you would like to build a log arch. You will need to determine the capacity that you will need to lift the logs you will be cutting. Having been around a farm most of my life, I would think that a 2,000 lb capacity winch would be sufficient, since you will not need to lift the whole weight of the log with it and if you are cutting fire wood you could reduce the length of the log. I posted a link to all of the 2,000 lb winches that we stock...
    view full answer...
  • What Dutton Lainson Jacks Does Dutton Lainson Socket Drill Adapter # DL6456 Fit
    The socket/drill adapter part # DL6456 that you referenced only fits worm gear style winches like the # DL11011 from Dutton Lainson and would not fit the winch part # DL14725.
    view full answer...
  • Replacement For Dutton-Lainson Winch DL2000
    The Dutton-Lainson DL2000 is indeed different as it is an earlier model of the DL2000A; I checked with Dutton-Lainson and they do not offer replacement parts for the older DL2000, and said that parts are not interchangeable between models. So while I know that is not the news you were looking to hear, the best option is to replace your DL2000 with the updated DL2000A, which is the following part number: - Dutton-Lainson Hand Winch # DL14725 This is compatible with either the Hand Winch...
    view full answer...
  • Availability of Shorter Winch Handle For Dutton-Lainson Winch Model DL1800A # DL15504
    The handle on your Dutton Lainson Winch Model DL1800A is 9-1/2" long so there are two short handle options. The # DL70336 which is 6" long, or the # DL70334 which is 8-1/2" long. Keep in mind that the shorter the handle is the less leverage you will have and the harder it will be to winch your boat onto the trailer. I recommend going with the longest winch handle you can fit for the easiest time using the winch. I included videos of the products mentioned for you to take a look at.
    view full answer...


< Previous
12



Do you have a question about this Trailer Winch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer winch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Jenny M
Updated by:
Jenny M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.