Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.
Features:
Specs:
These connectors give you the functionality of a 7-way connection, but without any pins or blades to bend or break. They're designed to create a secure, watertight connection that lasts. Strong magnets in both the plug and the socket keep the connection tight and secure, even when you're driving on rough terrain. Built-in O-rings create a seal to keep out water and debris. And spring-loaded, face-to-face electrical contacts are long-lasting and easy to clean. These factors combine for a strong, durable connection that's easy to use and to maintain.
The EZ Connector system uses magnets inside the plug and socket to hold the connectors together. Simply insert the trailer-end plug into the vehicle-end socket and the internal magnets will snap them together, no latch needed. To disconnect, just pull the plug out by hand.
This is an improvement over typical trailer connectors, which rely on a plastic latch on the socket lid to hold the trailer plug in place. With any trailer connector it can be easy to forget to disconnect the wiring when you unhook your trailer. If you drive off without disconnecting a standard 7-way plug, the connector will get pulled out of the socket, likely tearing off the lid. Without a lid, the electrical terminals are exposed to damaging moisture and debris. But if you forget to remove the EZ Connector plug when unhooking your trailer, the plug will simply disconnect from the receptacle as you drive off.
The magnets inside of these trailer connectors are made of neodymium, an extra-strong, rare-earth alloy. These high-quality magnets ensure a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration.
The EZ Connector trailer-end plug has a double O-ring that will create a watertight seal with the socket when it's inserted into the vehicle-end connector.
Once you disconnect your trailer from your vehicle, just insert the included dummy plug into the EZ Connector socket. This plug also has a double O-ring designed to seal to the socket, keeping out moisture and debris.
A storage holder is included to keep the trailer-end EZ Connector plug safe and dry when it's not in use. This holder conveniently attaches to your trailer so that it is always available when you need it. This ensures that the terminals on the plug and socket stay protected from moisture and debris at all times.
All of the EZ Connector systems have earned a perfect score on the SAE water submersion test. This means that the seal created on these connectors will stay watertight, even if the connectors are completely submerged in water for extended periods of time.
The EZ Connector plug and socket both have spring-loaded, face-to-face electrical contacts instead of pins or blades. Pins and blades can bend, corrode, and even break off, which can lead to a permanently damaged connection. With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on the trailer-end plug that can trap debris. And if any dirt or debris does collect on the terminals of either end of an EZ Connector setup, it can be quickly and easily wiped away. No more scraping pins to get grime off. The result of all of this is a quality, effective connection every time you plug in.
Average Customer Rating: 4.7 out of 5 stars (64 Customer Reviews)
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.
The best trailer connector available. Should be on all Trailers.
I bought this connector to replace a 'conventional' connector on my boat trailer (salt water application). Corrosion on the terminals of the old connector was hard to control and was affecting performance. I installed this connector with just a dab of dialectric grease on the terminals and have not had any issues after a year of heavy salt water usage.
The trailer plug is indeed novel and seems well-made: that said, the pigtail provided on the trailer side of the plug is BARELY long enough to make the reach to the truck!
Luckily, I'm good at repairing poor designs...:)
Great contact, with the regular 7 pin I would get “trailer disconnected’ warning and would lose backup camera. Haven’t lost connection yet in 400 miles.
While I think the plug will perform very well (well made, excellent sealing ability), I was stimmed by the truck installation portion of the project. After many trials and errors, I hired an experienced mobile RV service. He too had many problems. After contacting e-trailer, it was determined that the 2002 Ford Excursion 7.3 is NOT "plug and play" wire color to wire color. He gave us the correct wire color connections for the truck and trailer and it worked perfectly.
Robert
12/1/2023
A very reliable and consistent method of making the truck to trailer 12v hookup. Weather impervious have experience travel in heavy snow and rain. Highly recommend this connection to the traditional 7-way.
This is a very strong connector. No more bad connections on the road! Excellent product. For me as a female, disconnecting the plug is actually a bit difficult because the magnets are so strong. But I manage and it feels great not to worry about this connection anymore.
None
10/22/2023
The connector is still working great. The seal is strong and I never lose connection. I love the feature of having a magnetic cover for the connector when it is not being used. It is protected at all times.
Mike L.
11/10/2023
The connectors work very well for sure. They are extremely easy to keep clean so that the electrical contacts are very reliable.
Firstly, the product looks and feels like a quality product. The quality of the rubber, the strands of copper in the wire are thin to make the cord more flexible, and the secure grip of the magnet all give the impression of quality. The mounts are nice and the covers on each end fit really nice.
Secondly, my interaction with Dena was really helpful and professional. She really made an extra effort to make sure the order was correct and she was so polite about it.
I always had connection problems with the spade connectors and was never quite sure if my trailer lights would be blinking when I walked around to check the lights. I use one van and have 3 trailers for different purposes. There's nothing more annoying than seeing the lights are out when you want to take off in a hurry. The bolts are stainless which is always a sign of a quality product.
I think direct flat surface pin to pin contact is a reliable means of conducting electricity.
Christopher B.
6/21/2019
I use the trailer a lot and every time I plug it in, I get the feeling that my connection is secure. No signes of wear or corrosion after one year.
Awesome design for an electrical coupler. Prevents unwanted water intrusion and is super easy to use.
Only complaint is that the trailer side pigtail is too short to allow the end user to terminate the connections where needed if you have a long trailer tongue.
I haven't actually used the products as yet, as my new trailer is still on order. I needed to get my Chevy Equinox tow ready so I ordered early. As usual, etrailer.com was very prompt with my shipment. Everything arrived with plenty of time to get them to my installer!
Mike S.
5/12/2021
Its been wonderful!Late last summer,I made a 4500 mi. run to SW OR to pick up a car that I had bought. I ran into a blizzard in WY mind you, it was still Summer with all the muck & slush Ma Nature could muster. Didnt have a bit of trouble with the trailer electrics! I am very satisfied!!!
I needed a good waterproof connector for my snowblower and I think I just found one. I didn’t get it connected yet but I think it’s going to work
Ray K.
3/22/2020
Great I’ve had no problems with this winter with my big snowblower
This is by far the best upgrade to my trailer,for the mere fact that I do not have to worry about it coming detached and losing my brakes on a steep down hill,it should be standered on all new trailers if the manufacturers give a darn!
So nice to connect and not have to debug any problems...
I really like dealing with etrailer.
Great selection at very competitive prices.
My last order arrived with one item slightly damaged. etrailer made it right quickly, easily and no hassle.
Bought the EZ connector trailer plug system for a new truck. A well thought out system that sure looks like it's going to be way better then any other trailer plug I've seen.
I like the design and function off the plugs but the lack of wire for the trailer plug is a big concern. Instead of splicing it would rather have enough to go to the junction box
Good quality wire and plug! Just installed it and will be used often.
I have converted my trucks and trailers to the magnetic EZ Connectors. I love them and I recommend them. They are trouble free in my experience. They stay clean and functional in all kinds of weather.
From time to time we have someone else using one of our trailers, etc., so having adapters available is a good idea.
Great service from etrailer.com
I was tired of having connection problems with the standard 7 prong trailer plugs, I did not like the fact that I could not count on my trailer brakes 100% of the time to help me stop or slow down in an emergency. After doing some research I found that people were having good luck with these EZ Connectors. I was working on my standard plugs all of the time. I know that rough dirt roads and driving over roads treated with magnesium chloride did not help with my connection issues, but I finally had enough and purchased what I believe is the best trailer connector made, The EZ Connector is completely sealed and the contacts are under constant pressure when in use, It also came with magnetic caps for both ends to keep the socket clean when I am not pulling. It is made in the USA so that makes me happy as well. I am very pleased with this product, and the service I received from etrailer was Top Notch.
Couldn't be better! My wiring connection went from being a constant worry to a never worry. The EZ Connector just works. I love that it seals. All the connections still look new. Even has a sealing storage receptacle for when it isn't connected. I will never have another camper without it.
I love the convenience of having a magnetic connector. Unfortunately after 6 months the connector gives me problems with a solid connection. If it was just a matter of plug and go I would give 5 stars.
I love this connector. When I first read the description for this product I thought where has this product been? I have it installed on my Class A motorhome and Jeep. The best modification ever! When the cables are connected 100% confidence the Jeep tail/brake/turn signals are working. Love it! No more spreading pins or reconnecting cables.
Have had this product for one year now. We drive a lot of gravel roads with our truck and trailer. The magnetic connection and watertight seal keep all water and debris out of the connections. Haven’t had one issue with poor connections. Will definitely be upgrading more trailers to this connection!
Great item - install is a bit intricate , but the included instructions give plenty of detail to assist . Some electrical knowledge is definitely helpful . Security of the connection is the primary reason this is a huge upgrade from the normal 7-pin . I have a Propride hitch which puts additional stress on my 7-pin and this completely eliminates any issues .
This product was more impressive than I thought! Once you get the magnetic connector in hand, you can really appreciate the craftmanship and quality.
I love this connection. The magnetic plug takes all uncertainty out of whether your connection is solid.
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike
10/4/2024
The ez connector has been working as good as the first day! No issues should be on all RV’s.