bing tracking image
  1. Trailer Wiring
  2. Hopkins
  3. Trailer Connectors
  4. Trailer End Connector
  5. 4 Flat
  6. Plug and Lead
Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End - Jacketed - 48"

Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End - Jacketed - 48"

Item # HM38134
lowest price pledge
Our Price: $18.45
Trailer Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.33 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Easily disconnect this 4-way flat trailer-end plug from your vehicle without damaging the terminals. Large grip ring provides maximum leverage when disconnecting. Harness splices into your trailer's wiring. Durable cable covering resists damage. Lowest Prices for the best trailer wiring from Hopkins. Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End - Jacketed - 48" part number HM38134 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (74)
  • Q & A (0)
  • Photos
  • Why etrailer?

Hopkins Trailer Wiring - HM38134

  • Trailer Connectors
  • Trailer End Connector
  • 4 Flat
  • Plug and Lead
  • 0 - 5 Feet Long
  • Hopkins

Easily disconnect this 4-way flat trailer-end plug from your vehicle without damaging the terminals. Large grip ring provides maximum leverage when disconnecting. Harness splices into your trailer's wiring. Durable cable covering resists damage.


Features:

  • 4-Way flat trailer-end connector plugs into the 4-way flat on your vehicle
  • Easy-to-pull ring makes 4-way easy to disconnect
    • Ring handle makes it easy to pull connector straight back for proper leverage
      • No wiggling plugs or damaging terminals
    • Wide handle makes it easy to grip connector
  • Protective cable sleeving is durable and insulated
  • Simple installation - hardwire to existing trailer wiring
  • Corrosion-resistant terminals are long-lasting


Specs:

  • Ring inner diameter: 1"
  • Ring outer diameter: 1-7/8"
  • Wiring harness length: 48"
  • Wire configuration:
    • White: ground wire
    • Yellow: left turn/brake light
    • Green: right turn/brake light
    • Brown: tail lights
  • 3-Year limited warranty


Easy-Pull Ring Handle Is Easy to Grip and Pull

Easy Pull

Standard 4-way flat plugs have a small surface area to grip when you are pulling them apart, forcing you to wriggle the plugs back and forth to loosen them. Some users even pull on the wires. This can lead to broken terminals or ripped wiring. With the Easy-Pull harness, the plug has a large grip ring designed to make disconnecting a snap. Simply slide your finger into the ring and pull the plug away from the opposite plug to disconnect.


Easy Pull Rings

The Easy-Pull is also available as a vehicle-end 4-way flat plug. Combine the Easy-Pull trailer-end plug and vehicle-end plug for the easiest possible disconnection. With ring handles on both connectors, disconnecting is as simple as gripping the rings and pulling straight apart. No wriggling, no broken terminals, and no damaged wires.



38134 Hopkins Easy Pull 4-Pole Flat Trailer Wire Harness with Jacketed Cable - Trailer Side - 4' Long




California residents: click here



Customer Reviews

Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End - Jacketed - 48" - HM38134

Average Customer Rating:  4.8 out of 5 stars   (74 Customer Reviews)

Easily disconnect this 4-way flat trailer-end plug from your vehicle without damaging the terminals. Large grip ring provides maximum leverage when disconnecting. Harness splices into your trailer's wiring. Durable cable covering resists damage.

by:

So much easier to use with the large pull handle. Great for use when your Trucks harness is in a tough to reach place


Comments
Still a great harness. Very durable
Michael - 05/30/2022
Comments
excellent
-- comment by: norwood - 08/01/2022


by:

Heavy duty. Finger hole make it more likely it will not get pulled out by the cable. Works good on our smaller trailers.




by:

The wiring was just what I needed and the shipping was quick. I will definitely be using etrailer more in the future.




by:

Works perfectly111


Comments
Prefect, so much better than stock plug.
Ted S - 07/17/2022


by:

Nice quality, great solid jacket around the wires. Makes unplugging very easy!!!




by:

This connector is much more robust than standard flat pigtails. I particularly like the sheathed cable rather than the exposed flat four-wire.


Comments
Working perfectly. The hole pull works far better than yanking on the wire leads when disconnecting
Kenneth - 09/24/2021


by:

Great design and rugged materials.




by:

This is made from good materials and should last me many years of service on my utility trailer. The life-span will depend on how much winter trailering I do as the road salt used up here in Ontario, gets into everything.




by:

very heavy duty trailer pigtail cable. This is what I need to prevent kinks and breaks in the wiring harness. Nothing like hooking up trailer lights that dont work because the wiring is easily damaged.




by:

Nice solid, molded grab handle. I’m switching all my 4 wire trailers over to these harness. Well made


Comments
Have not had one issue in the year since I installed them. A+. Worth the extra cost
Ray C - 07/16/2021


by:

Great Company Quality Product Fast Shipping will do business with them again




by:

as expected. I put one of these on my last boat trailer and will install on any trailer I own from now on. Very durable, easy to plug in/unplug.




by:

Perfect maybe a little short




by:

Solidly made, and easy to use the the ring handle.




by:

Well made unit that makes it easier to connect and remove from tow vehicle. Lead is 48" long but would be better if a little longer, maybe 60 or 72" to facilitate connection to tow vehicles with extended hitches or trailers with long tongues. Would be fantastic if the monitor/test lights were included on connector.




by:

Solid construction and a long enough lead to easily connect and reach the trailer hookup.




by:

This is a great product, solid and great quality. Three things that would help the consumer. First thing would be to add solder-less connectors. Next thing would be to have about 6-8” of exposed wire to work with when coupling. And last thing would be to furnish a dust cover for the plug end.


Comments
I couldn’t be any more happy. It has held up to many fishing trips on my boat trailer, great!
Ted - 09/14/2020


by:

I have purchased these ones before, for our fleet of trailers. Great quality cable and easy to plug in/out of vehicle. I stock a couple of these for repairs.




by:

Exactly what I wanted. Excellent quality. Couldn’t find it anywhere. Etrailer had it !




by:

Great product! Makes installing and removal easy and you have less of an opportunity of damaging the prongs when removing (as compared to the traditional 4 flat plug). As with any product it is not indestructible but far better than the latter.




by:

Finger pull feels good and will make it much easier to plug and unplug. The jacketed wire is a bonus to keep everything tidy.




by:

A real upgrade to typical 4 wire trailer connectors. If you are doing any trailer wiring I strongly recommend this replacement.

Well made with an integrated cover like a outdoor extension cable the ring makes it easy to hold when inserting or removing the connection from your vehicle.

It would be perfect if it came with the very fine cover that Hopkins includes with most other variations of the "ring" style connector.




by:

Love the finger loop. Next time I need to replace my trailer light plug this will be my choice.


Comments
Excellently. Love the ring!
Kenneth - 09/06/2019



by:

Great product. Easy to install and top quality.


Comments
Absolutely love this product!
Mark R - 06/15/2021


by:

Excellent product. It has held up well over the last year of use.



25
74
Show More Reviews

See what our Experts say about this Hopkins Trailer Wiring



  • Can 5-Way Connector on Shorelandr Boat Trailer be Converted to 4-Way Connector
    You definitely can convert the 5-Way connector on your Shorelandr boat trailer to a 4-Way flat connector. To do this you'll just need to cut off the 5-Way connector and splice on a 4-Way. For that I recommend the Hopkins Endurance Easy-Pull Harness # HM38134 which has the following wiring configuration: White: ground wire Yellow: left turn/brake light Green: right turn/brake light Brown: tail lights It is worth noting that you can actually just plug a 5-Way into the 4-Way on a tow vehicle...
    view full answer...
  • Trouble With Trailer Lights Flashing Off and On When 4-Way Connected
    It sounds like the problem is in the wiring on the 4-flat connection of the trailer. I recommend the Hopkins Endurance Easy-Pull Harness # HM38134 to replace the 4-way plug on your trailer. I'm guessing that there many be a connection issue at the 4-way or the ground wire inside the harness broke and this is what is causing your lights to flash. That is the last point and explains why your lights all work when you ran a dedicated ground wire to the battery. You can confirm that it is...
    view full answer...
  • Connecting Trailer Harness to Trailer Wiring with Different Colors
    It sounds like the new 4-way trailer connector uses standard trailer wire coloring, like part # HM38134: green for right turn and brake, yellow for right turn and brake, brown for running light, and the white wire gets grounded to the trailer frame. That's the easy part. The hard part is finding what the trailer's colors are. Unfortunately, there's no definite way to do this other than getting a 12 volt battery, grounding the ground wire (probably the white) to the battery's negative...
    view full answer...
  • 4-Way Trailer Wiring Kit Recommendation for 2009 Mazda MX-5
    A 6-pole flat connector is not a common style of trailer wiring connector so we do not have any adapters to go from a 4-way to a 6-pole flat. Best option would be to install the Hopkins trailer wiring kit part # HM11141824 and then remove the 6 way and install a 4-way in it's place with the part # HM38134.
    view full answer...
  • Matching 4-Way Recommendation to Fit the Hopkins # HM38134
    For the connector that will mate up to the Hopkins # HM38134 that you referenced that has the pull ring and the cover you are interested in you'd want the part # HM48044 for a 48 inch long version.
    view full answer...
  • Adapter for a 4-Way Flat to 6-Way Square Trailer Connector
    The only 4-flat to 6-square connector we carry is part # 30104. This sounds like what you're looking for but I'm not sure exactly if this is the same connector on your trailer. If you can send me a picture I can try to verify that. If this doesn't work you can add a 4-way to the trailer instead of using an adapter. You don't have to cut off the existing 6-way but instead splice into the existing wires and connect a 4-way in addition to the 6-way. Part # HM38134 will work.
    view full answer...
  • Installing a 4-Way on a Trailer that has a Green, a Yellow, a White, and 2 Brown Wires
    It sounds like you have the typical wire colors for your trailer (see attached picture). If that is the case then you will need to do exactly what you are talking about to install a 4-Way connector on your trailer like part # HM38134. The Brown wire should be the running lights which will need to be spliced together and then connected to the Brown wire on the 4-Way harness. You can verify that you are connecting everything correctly by verifying that the functions on the Tekonsha T-One...
    view full answer...
    Image 1 for
  • How to Splice in Replacement 4-Way Trailer End Connector
    To splice in a trailer end connector such as the 4-Pole Trailer End Connector # 18004 or Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End # HM38134 you will need to match the connector to your wires by function. On these connectors, the brown wire is the tail lights, the green is right turn/brake light, the yellow is left turn/brake light and the white is ground and your connector will likely be the same. Since your damaged plug does not have these you can either...
    view full answer...
    Image 1 for
  • What Size Wire Gauge Do 4 Pole Connectors Use
    The Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector # HM38134 you referenced has 18 gauge wires for the brown (taillight), green (right turn and brake), and yellow (left turn and brake) wires. The white (ground) is a 16 gauge wire. Typically 18 or 16 gauge wire is sufficient to run trailer lights, especially when you use LEDs since they draw much less power than incandescent bulbs. For similar trailer connector that has all 16 gauge wire the Wesbar 4-Pole Flat Connector w/...
    view full answer...
  • Can 4-Way Flat be Used as Tow Bar Lighting Connector
    Sounds like you'd just need to wire in the part # HM38134 to the wiring on your vehicle in place of the 4-way round so that your 4-way wiring can attach directly to it. If this was not what you are looking for let me know more info on what you have so that I can check further. I'd need to know the connector at the rear of your tow vehicle, the connector at the front of your towed vehicle, and what connectors are present on your coiled adapter.
    view full answer...
  • Availability of 7-Way Round to 4-Way Flat Adapter for a Light Plant Trailer
    If you have a 4-Way Flat connector on your light plant then the easiest way to connect it to the 7-Way on your tow vehicle would be with the Hopkins Adapter # 47345. We also have the Hopkins Adapter # 30955 which you could permanently install on your tow vehicle by simply disconnecting the US Car Connector from your current 7-Way and plugging it into the back of this adapter. This would give you both a 4-Way Flat and a 7-Way Blade connector so that you don't have to keep track of an adapter. If...
    view full answer...
    Image 1 for
  • Identifying 4-Way Trailer Wiring For Connecting To New Trailer Side Connnector
    The wires on your trailer sound abnormal for a typical trailer. I recommend either tracing each wire to determine what function it serves or using a battery to power the wiring. The Hopkins Endurance Easy-Pull Harness # HM38134 is one of the better connectors to use. It has the pull ring that will reduce the chance of damage to your wiring in the future. For the vehicle side your white wire is typically the ground, yellow left turn/brake, green right turn/brake and brown is the running...
    view full answer...
  • Can the Hopkins Endurance Easy-Pull Harness Be Installed On Trailer With Two Brown Wires (Wishbone)
    The Hopkins Endurance Easy-Pull Harness part # HM38134 can indeed be installed on a trailer with a wishbone wiring harness. In order to do this you would simply combine the like circuits together, therefore you would combine the two brown wires for the running light circuit as well as the two white wires for the ground circuit as well if present. The only thing you'd really need is some butt connectors, part # DW05744-10.
    view full answer...
  • How To Wire LED Trailer License Plate Light For Cargo Carrier To A 4 Way Flat
    I have a solution for you to hook up the Optronics LED Trailer License Plate Light w/ Bracket # LPL55CB to your 2021 Subaru Ascent without tapping into the wiring. You could install Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End - Jacketed - 48" # HM38134 into the 4 way flat plug at the back of your vehicle which would provide you with 4 bare wires. You could then wire the white ground wire on the LED lights to the white wire on the Hopkins 4 way harness. Then...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Lights Come on With 2017 Hyundai Santa Fe Off With Curt Wiring Harness
    There are a myriad of reasons why your trailer lights would be on while your 2017 Hyundai Santa Fe's lights are off, and generally the issue is on the trailer side. So the first thing to do is take a look at your trailer's 4-way and check it for corrosion. A build-up of corrosion can cause numerous issues with the lighting signals, so if it is corroded then you will need to replace your trailer 4-way with the Hopkins 4-Pole Flat Connector # HM38134. Also, to ensure there is no corrosion...
    view full answer...
  • How To Replace 4-Way Trailer Connector on Karavan 5x8 Utility Trailer
    If the trailer has a 4-way flat connector then that means there are only three lighting circuits, left stop/turn, right stop/turn, and running lights. The left stop/turn is usually a yellow wire, the right stop/turn is usually green, and the running lights are usually brown. If you have multiples of any color at the connector then that just means the wires weren't combined mid-way and you would just need to do so at the connector. I recommend the Hopkins Endurance Easy-Pull Harness part...
    view full answer...
  • Replacement Jack Wheel For A Reese Trailer Jack
    For your Reese 74410 Trailer Jack, you can use the Removable, 6" Poly Caster Assembly for etrailer or Ram Jacks # JWK-6P to replace your current wheel. This wheel has a maximum weight capacity of 1,000-1,200-lbs, has a diameter of 6" and a thickness of 2". We do not carry the Reese 8551700 connector you're after, however, the Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector # HM38134 will work just as good, and features an easy pull finger loop to make hooking and unhooking...
    view full answer...
  • Recommended 4-Way Flat Trailer Connector with Pigtail
    I recommend using one of the Hopkins Easy-Pull 4-Way Flat harnesses. These have a connector with a loop in the middle that makes disconnecting your trailer wiring from your tow vehicle much easier than a standard 4-Way Flat connector. The wiring is also labeled which helps with the installation. This comes in a 12" version as part # HM48114 and a 48" version as part # HM38134. We also have the 12" part # HM48138 which has an integrated LED tester. I recommend using 16 Gauge Butt Connectors...
    view full answer...
    Image 1 for
  • Trailer Wiring Harness for Snowmobile Trailer
    We have numerous trailer wiring harnesses you can use for your snowmobile trailer, but none specifically for a Triton trailer. You just need to choose from if your trailer needs a 4-way or 7-way, and there are 7-ways with insulated cable which is great for a snowmobile trailer. - 4-Way: Hopkins Endurance Easy-Pull Harness # HM38134 - 7-Way: Bargman 7-Way, RV-Style Connector with Heavy Duty Insulated Cable - 6 Ft # 54006-057 or 8 Ft # 54006-058 I have added links below to some video reviews...
    view full answer...
  • Towing a Trailer with European Connector with a 2018 VW Passat
    The Curt wiring harness # C56388 is a standard 4-way connector that's commonly used in the United States. It powers the running, brake, and turn signals on a trailer. In order to connect your trailer with a European connector you'll need to replace the connector with a standard trailer side 4-way like part # HM38134. You'll need to determine which wires on the trailer are for each function and wire them into the new 4-way. On the 4-way the white wire needs to be grounded to a clean...
    view full answer...
    Image 1 for
  • Solution for 4-Way Round Connector on Trailer to 4-Way Flat Connector on 2016 Honda Pilot
    I do have a solution for you but unfortunately there are no adapters for a round 4-Way connector on your trailer to the Curt T-Connector # C56291 on your 2016 Honda Pilot. Instead what you will need to do is swap out the 4-Way round connector on your trailer for a 4-Way flat connector. I recommend cutting the connector off and splicing the Hopkins Endurance Easy-Pull Harness # HM38134 on your trailer wiring so that you get a connector on your trailer that is compatible with your vehicle....
    view full answer...
  • What to Check When There is No Power to the Right Side Blinker and Brake Light?
    The white wires will indeed need to be grounded. This should be done with both lights. If this does not get the lights working properly, you will need to use something like the # 40376 to test several things. First, you will need to check the plug on your vehicle to make sure all the ports are working properly. If you have a 7 Way connection, the 3 o'clock position will be the right turn signal and right brake signal. If there is no power, you will need to then check the wire on the back...
    view full answer...
  • Easy Way to Wire B&W Custom Headache Rack to Truck
    The B&W Custom Headache Rack with LED Lights # BWPUCP7500WA is designed so that the two innermost lights will serve as taillights while the two on the outside work as brake/turn lights. These lights are fed by bonded 4-pole wiring like what is typically found in a 4-pole wiring harness. Your easiest solution is going to be to install a 4-way on the end of the wiring harness that comes with the headache rack like the # HM38134 so that you can plug it into a 4-way installed inline with...
    view full answer...
  • Easy Way to Wire Lighting of B&W Headache Rack to Truck Trailer Wiring
    The B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights # BWPUCP7500WA that you referenced uses standard 4-way wiring to power the lighting functions. So what you can do is install the # C55384 behind the 7-way of your truck and then wire a 4-way part # HM38134 to the headache rack and you'd have a very easy to install wiring setup.
    view full answer...


< Previous
12



Do you have a question about this Trailer Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Adam E
Installed by:
Adam E
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video by:
Chris R
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.