bing tracking image
  1. Trailer Wiring
  2. Hopkins
  3. Trailer Connectors
  4. Trailer End Connector
  5. 5 Flat
  6. Plug and Lead
Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends - Ergonomic Design
Hopkins

Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends - Ergonomic Design

Part Number: HM47890
In Stock
$19.90
Retail:$32.39
You Save: 39%
Trailer Wiring
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
The 5-wire design of this kit is perfect for newer boat trailers with hydraulic brakes. Easy-pull connector housings make disconnecting a snap. They include built-in mounting holes and protective dust covers on both the vehicle and trailer plug. Great Prices for the best trailer wiring from Hopkins. Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends - Ergonomic Design part number HM47890 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (33)
  • Q & A (0)
  • Photos

Hopkins Trailer Wiring - HM47890

  • Trailer Connectors
  • Trailer End Connector
  • 5 Flat
  • Plug and Lead
  • 0 - 5 Feet Long
  • Hopkins

The 5-wire design of this kit is perfect for newer boat trailers with hydraulic brakes. Easy-pull connector housings make disconnecting a snap. They include built-in mounting holes and protective dust covers on both the vehicle and trailer plug.


Features:

  • Wiring kit includes vehicle-end connector and trailer-end connector
  • 5-Wire design common on boat trailers with hydraulic brakes
    • Provides backup function to release surge brakes
  • Easy-pull, ergonomic grips on connectors make disconnecting a snap
  • Heavy-duty connector housings have built-in mounting holes
  • Durable, molded dust covers provide superior protection for terminals
    • Tin-plated terminals resist corrosion
  • Nylon sleeves and heat-shrink tubing protect wires
  • Terminal grease packet and ground screw included


Specs:

  • Connector: 5-way flat
  • Vehicle-end wire length: 48"
  • Trailer-end wire length: 18"
  • 3-Year warranty


The 5-way flat connector is found on most newer boat trailers that have hydraulic brakes. The fifth wire in this model ties into the reverse lights on your vehicle so that a signal can be sent to your hydraulic brake actuator to disengage whenever the tow vehicle is put into reverse. To use this function, your actuator must have an electric reverse lockout with solenoid.


The 5-way design will also work with small utility trailers that have electric brakes. For this type of application, the fifth wire will need to be wired to correspond with your in-cab, electric brake controller.



47890 Hopkins Endurance 5-Wire Flat Vehicle and Trailer End Connectors




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends - Ergonomic Design - HM47890

Average Customer Rating:  4.9 out of 5 stars   (33 Customer Reviews)

The 5-wire design of this kit is perfect for newer boat trailers with hydraulic brakes. Easy-pull connector housings make disconnecting a snap. They include built-in mounting holes and protective dust covers on both the vehicle and trailer plug.

by:

etrailer is the only place I could find this item. It is much higher quality than other flat connectors, with weather covers and big finger/thumb grips to actually hold onto the connectors and easily separate them. I used the 'trailer' end in my adapter unit.



by:

Amazing service

Marcos

6/6/2024

Great



by:

The female connector is attached to the swing arm of a motorcycle to provide lighting lighting for a trailer pulled by the motorcycle. This means that there is likely much more movement in the harness than for an automotive application. I've never had a problem with any part of the harness. I found this product to be exactly what I wanted, well made and easy to install. The protective cap functions well as it remains pliable (flexible) after a year of use, and while it has never fallen off in use, it is easy enough to remove before making the connection. It has done the perfect job of keeping mud and other detritus out of the contacts. The recessed nut holders also function well and is one of the reasons I chose this wiring kit. This wiring kit gets high regard and recommendation from me. All of my purchases from etrailer have been solid products delivered at reasonable cost.

Bob S.

2/7/2018

It works, still. Does the job I need it to do. Not much more to say. In general, I tend to like the stuff that Hopkins makes.



by:

The quality of this connector is great. I installed ea one end to the hitch platform on the motorcycle and bolted it down then did the same on the trailer. I used the old connectors to make a jumper between them. Works great and I don’t have to worry about wires getting damaged. Love it

Warren

8/18/2020

Still working great



by:

One year after installing the conversion of drum to disk brakes on my single axle EZ Loader boat trailer, the brakes continue to work perfectly. I've had no reason to seek assistance on service or warranty.



by:

With the help of Crystal I ordered this connector and a matching wiring harness for my motorcycle and trailer. I was unsure if these were the correct parts, but Crystal was able to locate the exact ones and ship them the same day.
I was very pleased with the fast service and knowledgeable staff. Even with standard shipping, my order arrived 4 days sooner than was projected.

To say I'm happy with etrailer is an understatement. They are great.



by:

The Hopkins Endurance 5-way flat trailer wiring Kit PN HM47890 and wiring clips PN 464600 arrived ahead of the time scheduled and are of a higher quality than we expected. Thanks a million!



by:

Have not had opportunity to put products to use yet. Products look like they should do the intended job well. Etrailer.com does have really fair pricing and shipping time is outstanding! Received complete order within 3 days of placing order. Will definitely use again.



by:

Worked perfect....the mounting was great and placed the wiring neat and clean by the hitch on my Street Rod ...........I have you bookmarked for future purchases.



by:

Replaced a round connector that was unreliable and would loose connection over the road. This flat 5 pin makes 100% connection every time and stays connected. The boot is also weather tite when connected or not so there's no corrosion. Great product.



by:

Much better quality and more heavy duty than other plugs I have used. Should last a long time



by:

Order was shipped promptly and the product was of great quality.

Don S.

5/27/2017

Product is working just fine



by:

I'm hoping to do much more business with etrailer! Thank you



by:

All in all good service and fair price.
Forgot
to let me know they were out of 1 of the things I ordered.
But did get to me fast after that .
Life's to short to as it is Don't worry.
Thank you.



by:

Ordering was easy and fast liked item and reordered a spare because it was a quality item and priced right!!!!

Excellent co to deal with. They even called me to make sure I wanted another item of the same type!!!!!!

highly recommed this CO!!!!!!!!!!!!!!!



by:

THEY KNOW WHAT YOU NEED AND WHAT YOU WANT. SHIPPING IS FAST !!!!



by:

Delivered very fast. Top quality mercha ndise.



by:

Excellent service and product was just what I needed,Thx again.



by:

Product was as described and fast shipping, great service!



by:

Great product quality. Very well made. Buy with confidence.



by:

Excellent shipping time & speed. All that I ordered was in stock.
Thank you



by:

PLACED AND RECEIVED MY ORDER IN A TIMELY MANNER WITH COMPLETET SHIPPING INFORMATION. I WOULD GREATELY RECOMEND THIS CO FOR FUTURE ORDERS.
GREAT SERVICE!!!!!!!!!!!!!!!



by:

Shiiped quickly product was just as described.



by:

Great product, great videos



by:

Everything was great!


25
33
Show More Reviews

See what our Experts say about this Hopkins Trailer Wiring

  • Does Hopkins 4-Way Tow Bar Lighting Kit have Charge Line for Towed Vehicle Battery
    The Hopkins tow bar lighting kit part # HM56009 that you referenced does not carry a charge circuit. What you'd also need is the part # HM47890 to convert the 4-ways to 5-ways so you can use the extra pin for the charge circuit.
    view full answer...
  • Does the Dexter DX7.5L A-60 Brake Actuator Have a Lockout
    The Dexter DX7.5L A-60 Brake Actuator part # DX33FR comes with a manual lockout key for reversing. That said, if you would like for this to be done automatically you can simply add an electric lockout, the Solenoid Valve part # T4748800. That said, you'll also need a 5-way on the trailer and vehicle for this so if you don't already have one I recommend the Hopkins Endurance 5-Way Flat Trailer Wiring Kit part # HM47890. The Dexter DX7.5L A-60 Brake Actuator is made in the USA.
    view full answer...
  • Backup Light Wiring for Trailer Reverse Light Installation
    You are correct that a separate wire is run for a reverse light. The Light Guide LED Truck/Trailer Light - Backup and Tail - Submersible - 12 Diodes - Oval - Clear Lens # BUL602CRB will use the reverse light circuit of your tow vehicle, normally tapped into at the tail light assembly reverse light. This does require adding another wire to your trailer connector. I recommend using the Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends - Ergonomic Design # HM47890....
    view full answer...
    Image 1 for
  • How to Convert a 4-Way Connector to a 5-Way with Separate Taillight Circuits
    It sounds like you have a trailer with separate tail lights from the brake light circuit and you are looking to convert the 4-way from your motorcycle to a 5-way. First thing you will need to do is convert your combined tail light circuits to a separate tail light circuit. So like you said you would need another converter box. You would want a Converter Box # 118158 to make that conversion. You will also want to get a Hopkins Endurance 5-Way Flat Trailer Wiring Kit # HM47890 to give...
    view full answer...
  • Installation of Electric Reverse Lockout Solenoid for Surge Brakes
    If you don't install the reverse lockout solenoid # T4748800 that came with your actuator, then unless you have free backing brake assemblies, you will not be able to back up without activating the brakes immediately. This solenoid basically works like a valve not allowing the hydraulic brake fluid to move through the brake lines to activate your brake assemblies. Because you have a 4-way, I recommend you add the Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer...
    view full answer...
  • Will Titan Disc Brake Kit and Aero 7500 Actuator Fit A 3 Foot Swing Away Tongue
    You will just need to order a few extra parts to be able to use the Titan Disc Brake Kit and Aero 7500 Actuator w/ Manual Lockout on your swing away tongue that is 3 feet long. You will need to order the Titan Hydraulic Brake Line with Fittings - 12-27/32 Inches Long, part # T0777300, the Titan Hydraulic Brake Line with Fittings - 30 Inches Long, part # T1061900, and the Titan 3/16 Inch Hydraulic Union, part # T1287900. The 30 inch long brake line # T1061900 will attach to the actuator,...
    view full answer...
  • Can Reverse Lockout Solenoid Be Installed on DA91 Demco Hydraulic Brake Actuator
    Yes, you can definitely add a solenoid to the Demco Hydraulic Brake Actuator # DM8509202 so your brakes don't activate when you put your vehicle and trailer in reverse. What you're looking for is the Reverse Lockout Solenoid # DM11993. Just be sure to install a 5-Way connector on both your trailer and your tow vehicle so you can get that reverse function to the solenoid. If you don't already have these then we have the Hopkins Kit # HM47890 you can use to accomplish this.
    view full answer...
  • If Surge Brake Actuator is Removed Will Trailer Brakes Still Activate
    If you were to remove the surge brake actuator from your trailer then there wouldn't be any pressure to your hydraulic brakes which means your brakes simply won't activate at all. I recommend installing a reverse lockout solenoid like the Titan # TK71-755-00 or the Demco # DM5404 because it ties in to the reverse light function on your tow vehicle and essentially prevents your actuator from applying pressure to your hydraulic brakes. Keep in mind that you'll need to install a 5-Way flat...
    view full answer...
  • Parts Needed to Backup Without Putting on the Surge Brakes When Parking or Launching a Boat Trailer
    Yes, there is a way to back up your boat trailer and keep the surge brake actuator, # T43397007K, from applying pressure to the trailer brakes. You will need an electric lockout solenoid, # T4748800, which will close when you shift the vehicle into reverse, allowing the trailer to be backed. Along with the solenoid, you will need a solenoid cover, # T4835800183, if your actuator is the model 60 actuator that you referenced. The cover will keep the solenoid from getting stepped on and damaged...
    view full answer...
  • Parts Needed to Add 5-Way Connector to Trailer and Tow Vehicle
    Ok, so we have exactly what you need, and since your trailer has surge brakes what you'll need for the trailer is a 5-way trailer connector. Since it sounds like you want to use those surge brakes you will also need to cut off your vehicle's 4-way and add a 5-way connector to the vehicle. So what you can add is the following: - Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends # HM47890 To splice in the wires on these connectors you will need the Deka Heat Shrink...
    view full answer...
  • Is There a Manual Lockout Key for the Titan Model 20 Surge Brake Actuator
    I do have an option for you but the Titan Model 20 Surge Brake Actuator doesn't have a manual lockout key nor do we have one compatible. That said, if you need to lockout the actuator you can simply install a bypass solenoid, the Replacement Solenoid Valve for Titan Brake Actuators with Reverse Lockouts part # T4748800. This will require a 5-way connector so if you don't have one already I recommend the Hopkins Endurance 5-Way Flat Trailer Wiring Kit part # HM47890 which comes with both...
    view full answer...
  • How to Wire Titan # T4748800 Reverse Lock-Out Solenoid Valve
    The Titan Replacement Reverse Lockout Solenoid you mentioned is extremely easy to wire. The solenoid has two wires exiting it. One wire grounds to the trailer tongue, the other would connect to the reverse light circuit on the tow vehicle. Once wired, the solenoid will close when the tow vehicle is shifted into reverse, preventing the trailer brakes from applying when the trailer is backed. Since it sounds like both your vehicle and trailer have a 4-pole connector, you'll need to install...
    view full answer...
  • Availability Of 5 Flat Adapter For A 2021 Ram ProMaster 3500
    Hello Howard, we actually do sell a kit designed specifically for this purpose with the Curt Trailer Connector Adapter # C57187. This plugs in to the existing 4-flat and will hardwire into the reverse light circuit on your ProMaster van. I am afraid I don't have a way to tell you exactly where to find the reverse light circuit. You may be able to get that info from a dealership. Otherwise the best way is to go in with a wire tester like part # PTW2993 until you find the reverse wire.
    view full answer...
  • Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
    The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a 3-wire (or separate) tail light system. This means you will need a separate tail light circuit, brake light circuit, and turn signal circuits on the trailer. You will also need to use either a 5-way, 6-way or 7-way style trailer connector on your trailer and tow vehicle and substitute one of the pins for the additional...
    view full answer...
  • Will Removing Check Valve on Master Cylinder Keep Brakes from Engaging When Backing Up
    Removing the check valve from the master cylinder for hydraulic drum brakes, like part # T1777401, enables it to put out a greater psi rating so that it will be compatible with hydraulic disc brakes that require the higher psi rating. If you are mechanically inclined and you carefully reassemble the master cylinder then you can remove the check valve. However, if you are less mechanically inclined then it would be better to replace the drum master cylinder with a disc master cylinder,...
    view full answer...
  • Can a Reverse Light Function be Added to a 4-Way Connector
    Yes, running a separate wire for the reverse light function will work but you will need to use connectors on your tow vehicle and trailer that has 5 pin locations instead of 4. If you just need a 5-Way for your vehicle side then use part # HM47900 but if you need one for your trailer side use part # HM47910. These are combined in a package with part # HM47890 if you need one for both your tow vehicle and trailer. Simply connect the reverse light circuit to the pin location furthest...
    view full answer...
  • How to Wire Trailer Reverse Lamps On Trailer With 4 Pole Trailer Connector
    The easiest way to get the reverse lamps to function on your trailer without rewiring the vehicle would be to replace the existing 4 pole with a 7-way trailer connector. The fifth pin on the # HM47890 you'd looked at could be used, but you'd need to rewire both the vehicle AND the trailer. I have an easier suggestion.... We offer a 7-way connector/junction box as part # HS381-9000 that would be perfect for this sort of installation, as the junction box provides a good spot to neatly make...
    view full answer...
  • Adding 5-Way Flat Connectors to Trailer and Vehicle to Use Electric Reverse Lockout
    The electric reverse lockout included with Titan disc brake kit # T4748800 requires at least a 5-Way flat on the trailer and vehicle. The lockout solenoid gets power from the reverse light circuit from the vehicle. When the vehicle is placed in reverse it powers the solenoid and does not allow fluid to go back to the trailer brakes. It is actually easy to add a 5-Way flat to the vehicle and the trailer. On the trailer side, you just need to cut off the 4-Way and install a 5-Way flat in...
    view full answer...
  • How to Wire 5-Way Flat Trailer Connector for Hydraulic Surge Coupler
    The vehicle end of the Hopkins # HM47890 would install on the vehicle by tapping the green striped wire into the right turn, the yellow striped wire into the left turn and the brown striped wire into the running lamp circuit. The remaining blue striped wire would tap into the reverse lamp circuit. The white striped wire would ground to the vehicle frame. On the trailer end, the connector would install the same way, with the extra blue stripe wire connecting to the reverse lockout solenoid...
    view full answer...
  • Adding a Trailer Battery Charge Line to 4-Way Trailer Connector
    To charge your trailer battery from your vehicle, I recommend the Roadmaster Battery Charge Line Kit # RM-156-75. This can be run to 5 way connection on each side like the Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends - Ergonomic Design # HM47890. This will give you a clean connection of both sides to run to your battery terminals.
    view full answer...
  • How to Get Reverse Light and Separate Turn and Stop Signals for Trailer Towing
    To start off your project you need the Hopkins Endurance 5-Way Flat Trailer Wiring Kit # HM47890 this kit includes a 5-Way for your trailer and a 5-Way for your 2007 FJ Cruiser. This will allow you to send the reverse signal to your trailer in addition to the basic trailer functions. You will need to connect the following functions to the following wires: White - Ground Brown - Tail Lights Yellow - Left Turn/Stop Green - Right Turn/Stop Blue - Reverse Once on your trailer side of things...
    view full answer...
  • How to Wire Reverse Lights on a Trailer with a 4-Way Trailer Connector
    We do have a solution for you, however, you will not be able to power reverse lights on a trailer with a 4-pin trailer connector. The reverse lights on a trailer must receive power from the reverse lights on the tow vehicle. To do this, you will want to install a 5-pin connector on the trailer and on the tow vehicle. There are many options, but I recommend installing the Hopkins Endurance 5-way Flat Wiring Kit, # HM47890, for a uniform look. You can simply cut off the 4 pin connectors...
    view full answer...
  • What Is Needed to Convert a 4-Way to a 5-Way on a 2008 Honda Civic
    It sounds like you have a trailer with separate tail lights from the brake light circuit and you are looking to convert the 4-way from your Honda Civic to a 5-way and then remove the 6-way round connector from your trailer and install a 5-way. First thing you will need to do is convert your combined tail light circuits to a separate tail light circuit. So like you said you would need another converter box. You would want a Converter Box # 118158 to make that conversion. You will also want...
    view full answer...
  • Would the Connectors of the Quick Fix (TM) 4 Pole Flat Car and Trailer Ends Attach to a 5-Way
    The connectors that come with the part # 48195 are 4-way connectors. A 5-way would mate right up to this connector but the fifth circuit would get dropped off. If you are looking for a replacement set of 5-ways for both your trailer and tow vehicle you would want the part # HM47890.
    view full answer...


< Previous
12



Do you have a question about this Trailer Wiring?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jeff D
Expert Research:
Jeff D
Employee Cole B
Installed by:
Cole B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924