bing tracking image
  1. Trailer Wiring
  2. Hopkins
  3. Trailer Connectors
  4. Trailer End Connector
  5. 4 Flat
  6. Plug and Lead
Hopkins Endurance 4-Way Flat Trailer Connector - Trailer End - Ergonomic Design

Hopkins Endurance 4-Way Flat Trailer Connector - Trailer End - Ergonomic Design

Item # HM48110
lowest price pledge
Our Price: $6.94
Trailer Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.17 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Heavy-duty 4-pole flat trailer connector features an oversize grip to make connecting quick and easy. Built-in cover helps keep terminals corrosion-free. Lowest Prices for the best trailer wiring from Hopkins. Hopkins Endurance 4-Way Flat Trailer Connector - Trailer End - Ergonomic Design part number HM48110 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (105)
  • Q & A (0)
  • Photos
  • Why etrailer?

Hopkins Trailer Wiring - HM48110

  • Trailer Connectors
  • Trailer End Connector
  • 4 Flat
  • Plug and Lead
  • 0 - 5 Feet Long
  • Hopkins

Heavy-duty 4-pole flat trailer connector features an oversize grip to make connecting quick and easy. Built-in cover helps keep terminals corrosion-free.


Features:

  • 4-Way flat connector (trailer side)
  • Easy-pull, oversize grip makes connecting/disconnecting quick and easy
  • Heavy-duty housing with dust cover protects the terminals
    • Housing also has mounting holes
  • Terminal grease packet included
  • Works with all 4-way flat connectors


Specs:

  • Wires: 12" Long
  • Pigtail leads
  • Wire Configuration:
    • Yellow - left turn and brake
    • Green - right turn and brake
    • Brown - tail
    • White - ground
  • Wire gauges:
    • Ground wire: 16 gauge
    • Turn, tail, and brake light wires: 18 gauge
  • 3-Year limited warranty


A heavy-duty mounting bracket holds the 4-wire flat plug for a secure connection. The terminals are made of corrosion-resistant materials to withstand exposure to the elements.



48110 4-Wire Flat - Trailer Side




California residents: click here



Customer Reviews

Hopkins Endurance 4-Way Flat Trailer Connector - Trailer End - Ergonomic Design - HM48110

Average Customer Rating:  4.8 out of 5 stars   (105 Customer Reviews)

Heavy-duty 4-pole flat trailer connector features an oversize grip to make connecting quick and easy. Built-in cover helps keep terminals corrosion-free.

by:

I rewired my light bar for my boat trailer with the items I purchased. Before I built the the light bar, every time I used my boat trailer I would waste valuable sailing or fishing time repairing faulty lights. The do not last long when you submerge them in salt water. This light bar now version 3.0 have given little trouble over the years




by:

Great product.
Works well when I had
a broken connection on my 4 way plug end on my light-up hitch cover I bought from y'all a while back.
Always a happy customer.
Thanks, George.




by:

Working great!




by:

This was the perfect replacement for the old connector on my boat trailer with 18-guage wiring and 16-guage ground. Replacement was very easy. I just cut off the old connector and splice this one in its place using heat shrink butt end connectors. Fits very snuggly into my vehicle side connector, unlike the old connector I replaced.




by:

If you want a quality product, this is it. I have had it installed for one year and it is like new.




by:

Shawn B. (& everyone I talked with at E Trailer) was wonderful.
Great phone support. Great products. We did a great job installing the wiring harness.
Made me wonder why we originally took it to a "professional" trailer sales & service place in Ogden UT. They hacked into our wiring & created problems.
I will continue to be a grateful customer.
Finding good people who know their stuff in todays world is a soul healing event.
Thank you E Trailer!




by:

I actually got the idea from a trailer I rented once. You permanently mount this somewhere behind the coupler where it won’t get damaged and use an extension. It’s a lot faster and easier to replace a damaged extension wire than to solder a new plug onto your trailer wiring if(when) it gets damaged. I used mine on a 4x8’ utility trailer that I pull with my truck on the road and with a utility tractor off road, you don’t have to worry about the wiring for the lights hanging down dragging the ground getting damaged, you just remove the extension and put the weather cover on it when you’re off highway and don’t need the lights.




by:

item came as expected and is exactly what i needed -a trailer connector that will resist fraying at the point where the wires meet the connector ,nice and strong at that point, will last years instead of months.


Comments
its still the best ever ...will replace old wiring that has frayed or prevent such from occurring
k.nelson - 02/22/2017


by:

Product performed as expected and arrived quickly. Thank you.




by:

quality item, much better than the plug that came on my trailers wiring harness, hence the need to replace it. Soldered the new to the harness and covered with heat shrink. Fast service and better quality than offered at the big box stores. well worth paying the shipping charges.




by:

Sturdy plug, I like that it has a cover. Doesn't come with connectors like some of the others do, so be sure to order those, too. I used 3M snap, butt connectors would've been less bulky for the location. Shipped quickly, as always. Love Etrailer!




by:

It does what it is suppose to.




by:

With the help of an internet video, I joined this and a seven-pin female to create an adapter to connect my newly-purchased car to my travel trailer. It allowed me to get the trailer home pending a more permanent wiring change for the car. I was very pleased.




by:

Comes with documentation about wiring and a grease packet to put on the contacts to prevent corrosion. Wires are black with a colored stripe for identification per the documentation in the package.


Comments
Good sealed connector. Having the functions marked on each wire is great...no worry about color coding differences between different vintagesmodels of trailers or vehicles.
Wayne M - 02/07/2015


by:

A common problem with flat connectors is the ability to get a grip on them as you try to engage or disengage them. The ears on this one allow for a much better grip.




by:

Ordered two Enhanced Trailer Connector.
They
arrived on time, and met all my expectations
Thanks


Comments
Work on the advertised
Al E - 07/08/2014


by:

Great connector. Easy to use, environmental cap will be great to prevent pins corroding. Make sure you buy splices because product does not come with them. All in all, a great and easy product to use and install.


Comments
Adding dielectric grease to the connectors can be a big help at prevent corrosion on those contacts.
-- Etrailer Expert Patrick B - 07/31/2013


by:

Purchased this wire harness and the plastic cover has stayed intact protecting wires from weather. After 1 year it's still workin great.




by:

I bought this for my utility trailer, the weather proof cover for the plug is a nice touch and should help keep the pins from rusting.




by:

This is the one to buy. We hook-up and unhook our trailers on a daily basis. The wiring takes a beating. This product is fantastic. It has been reinforced around the housing and the base of the wires. The rubber on the side are excellent. They will have to keep our drivers from tearing the wires from the housing.




by:

Good product. Clearly marked wire pigtail (in multiple languages), perfect fit to OEM 4-pin harness and a nice braided sleeve.




by:

High quality product available at half the price or more than other merchandise providers. eTrailer's ordering process, shipping, timely delivery , and customer services were on target.




by:

Excellent product and well thought out. It even comes with a small, but adequate, bit of dielectric grease- nice touch!




by:

This item was a perfect replacement for the part that had gotten damaged. I ordered the part, it shipped quickly and was very reasonably priced. Could not ask for better service. Will be ordering more items from etrailer in the future.




by:

As always an easy shopping experience at etrailer. This product was exactly what I needed at a great price.



25
105
Show More Reviews

See what our Experts say about this Hopkins Trailer Wiring



  • Could Trailer Interior Lights Be Powered Off of the Running Lights Circuit
    If you were to hook up the interior lights of a trailer to the running lights circuit of the trailer wiring they would only have power when the headlights or running lights of the trailer wiring are active. Also you would not want to exceed the amperage capacity of the running light circuit with the amperage draw of the interior lights.
    view full answer...
  • Changing a 7-Way Trailer Side Connector to a 4-Way Trailer Connector
    Yes, you can just remove the wires from the trailer's existing connector and attach them to the new 4-Way, # HM48110. Taping off the unused wires will be fine just make sure they are secured so they are not flapping around loose. On the harness the white striped wire is ground, brown is running lights, yellow is left turn/brake lights, and green is right turn/brake lights.
    view full answer...
  • How to Connect 6-Way Flat on Trailer with 4-Way Flat on 2016 Mazda MX-5 Miata
    I do have a solution for you, however there is not currently an adapter available that will allow the 4-way on your 2016 Mazda MX-5 Miata to connect with the Bushtec 6-Way flat on your trailer. What I recommend doing is simply cutting off the trailer 6-Way and installing a 4-Way like the Hopkins # HM48110 that will be compatible with your tow vehicle. You can use a 12 volt battery to test each pin on the existing 6-way to determine their function, then simply connect the appropriate wires...
    view full answer...
  • Recommendation For Connecting 2004 Ford Ranger Factory Tow Package To Trailer With LED Lights
    Based on the information you sent, it sounds like you do not need a converter and only need a regular trailer side 4-way harness. I recommend the Hopkins Endurance 4-Way Flat Trailer Connector, Item # HM48110, for your 2004 Ranger and trailer. Based on your information, it sounds like the white is ground, the black is tail lights, and red is brake/turn signal for each light. When you connect these to Item # HM48110, the yellow wire will be left turn and brake, the green wire will be...
    view full answer...
  • Replacement 4-Way Recommendation for Utility Trailer with Damaged 4-Way
    Yes, the Hopkins replacement 4-way part # HM48110 that you referenced would work well as a replacement 4-way for your utility trailer that you damaged the 4-way on. You would just need to splice it in the same way as your previous connector was wired.
    view full answer...
  • Replacement 4-Way Recommendation for Trailer with Non-Standard 6-Way Flat
    The 6- pin connector you sent in a picture of is not a standard trailer wiring connector so it sounds like an alternative solution was provided by the shop you went to. Easiest solution will be to cut that off and install a standard 4-way to match the vehicle. For that we have the part # HM48110 that would easily wire to your current trailer wiring.
    view full answer...
    Image 1 for
  • What is the Wire Gauge Used in Hopkins Endurance 4-Way Flat Trailer Connector # HM48110
    I went out to the warehouse and pulled Hopkins Endurance 4-Way Flat Trailer Connector # HM48110 to measure the wire gauge. The ground wire is 16 gauge and all other wires are 18 gauge. this is adequate for trailer lighting functions since they don't have to carry anything that draws a lot of amperage such as brakes or a 12 volt circuit.
    view full answer...
  • How to Identify Wiring Configuration on 1964 Aladdin Travel Trailer
    Since trailer wiring colors can vary the best way to determine the correct wiring configuration to match your vehicle's 4-pole flat trailer connector is to do a simple test on the trailer. All you need to do is use a spare 12V battery or the (one in the vehicle) to apply power to each wire to see what function is activated. White wires are usually ground so connect the trailer's white wire to the battery negative terminal and then one by one connect each of the others to the positive terminal....
    view full answer...
  • How Can I Use my 6-way Round Trailer Connector with my 4-way Connector on my Vehicle
    In your situation I recommend using the Hopkins Endurance 4-Way Flat Trailer Connector part # HM48110. This will replace the 6 round connector on your trailer and allow you to plug it directly into your vehicle. There are no 4-way flat to 6-way round adapters that I know of available.
    view full answer...
  • Solution for Towing Camper with Square 6-Way Connector
    The square trailer connectors are super unique. There are only a couple manufacturers who made them a while back and they were all different so what we recommend people do in your situation is cut off the 6-way and wire a 4-way in place of with the # HM48110 and you'd have the simplest solution. To determine the function of each wire on your trailer you could trace the wiring or use a jumper wire from a battery to put voltage on each wire. The functions are labelled on the # HM48110.
    view full answer...
  • Replacing 7-Wire 4-Way Flat Plug with a 4-Wire 4-Way Plug
    You will splice your 3 white wires on your connector and put into the one white wire on the Hopkins Endurance 4-Way Flat Trailer Connector # HM48110. The 2 brown wires on your connector will splice into the one brown wire on the Hopkins connector. And the yellow and green will connect from your old to the yellow and green on the new connector. They do not make connectors like yours anymore due to the complexity of the wiring. Your connector had dedicated ground wires that ran all the...
    view full answer...
    Image 1 for
  • Correct Vehicle and Trailer Side Hopkins Endurance 4-Way Flat Trailer Connector
    The Hopkins Endurance 4-Way Flat Trailer Connector part # HM48110 is a trailer side connector which is designed to be installed on the towable. If you're instead looking for the vehicle side which is designed to be installed on the tow vehicle then you will need the Hopkins Endurance 4-Way Flat Trailer Connector part # HM48030. These harnesses both require splicing whether you are just replacing a trailer connector or wiring one for the first time.
    view full answer...
  • Installing a 4-Way Flat Trailer Connector on a 1971 Holsclaw C1700 Boat Trailer
    The best thing to do is to remove the 4-Way square on the trailer and replace it with a 4-Way flat to match the connector on your Ford Explorer. A 4-Way flat and 4-Way square are not wired the same and chances are the colors will not match up either. You will need to trace the wires back to determine the function of each and wire in a new 4-Way flat according to the description below. First you will need a 4-Way, like the 4-Pole Trailer End Connector, # 18004. Match the functions of the...
    view full answer...
  • Converting 6-Way Square Plug to 4 Way Flat Trailer Wiring Connector
    You'll need two things in order to convert your 6 pin square plug to a 4 way connector, Hopkins Endurance 4-Way Flat Trailer End Connector, # HM48110, and Vehicle to Vehicle Tail Light Converter, # 118158. Since motorcycles use combined wiring, meaning that the brake and turn signals run on the same circuit, when switching the plug we will set up the trailer's wiring in the same way. You'll want to start by cutting the wires right behind the six way connector. Next wire in the converter,...
    view full answer...
  • What are the Trailer Wiring Color Codes for Standard 4-way Wiring
    Sounds like your trailer is using a wishbone style of 4-way connection that is running all of their ground (white wires), and running lights (brown wires), back to the 4-way connector. You could use a standard 4-way still but you would need to splice all of the ground and running lights together to wire them to something like the part # HM48110.
    view full answer...
    Image 1 for
  • Troubleshooting Running Lights Not Working on an Enclosed Trailer
    The first thing I would check is the running light circuit on the truck side trailer connector to make sure a signal is getting through. Using a circuit tester like # 40376, and test the pin next to the covered ground pin. If the signal is getting through for the running lights then you know the problem is on the trailer side. if it is not, then you know the problem is on the truck side. If the problem is on the truck side, check to see if there is a trailer package running light fuse...
    view full answer...
  • Installing Vehicle to Vehicle Tail Light Converter # 118158 on Trailer w/Separate Brake/Turn Lights
    What the vehicle to vehicle (or vehicle to trailer in this case) does is to take the combined turn and brake signals on a vehicle trailer connector and separates them out so the turn signals and brake lights are separate. When using this converter on a trailer like you want to, you would not have to use diodes. I have included a picture that shows how it would wire up. Essentially you would mount this converter on the trailer. The trailer would need a regular 4-Way flat connector like...
    view full answer...
    Image 1 for
  • Troubleshooting Non-Working LED Running Lights on 34 Foot Trailer Although Brakes Lights Do Work
    A good way to start the troubleshooting process is to test the 7-way on your tow vehicle. Looking at the outside of the connector, the pin in the 1 oclock position is for your tail and running lights. Using a circuit tester such as # 40376, make sure that pin is receiving power. Also check for corrosion or damage to the pin because either of these situations can hinder the flow of current. If your connector is not receiving power check the tow package running light fuse, it may have blown. If...
    view full answer...
  • Hopkins 4-Way Recommendation to Re-Wire a Trailer with a Vehicle 6-Way Installed
    Since you said your trailer was a homemade trailer I wonder if someone mistakenly installed a vehicle side 6-way on the trailer and that is why you have a female 6-way there. The best recommendation I can give you would be to cut off the 6-way on your trailer and wire up a trailer 4-way like part # HM48110. I attached an FAQ on trailer wiring for you to check out. The easiest way to determine the functions of the wires of the trailer wiring would be to use a jumper wire and a car battery...
    view full answer...
  • Can a European 7-Way be Connected to a US Spec 7-Way Trailer Connector
    We do not have an adapter to go from a US style trailer connector to a European 7-Way. My recommendation is to leave the wiring harness on the vehicle and put a 4-Way flat on the trailer. You would need to cut off the Euro 7-Way and in its place use # HM48110 or similar trailer side 4-Way. The functions are white is ground, brown is running lights, yellow is left turn and brake lights, and green is right turn and brake lights. You will need to attach the wires to the existing trailer wiring...
    view full answer...
  • 4-Way Recommendation for a 1997 Dutchmen Popup with a 6-Way Square
    The pinout of the # 30104 that you referenced will only work on Jayco trailers. Although the connector is the same the wires are run to different pins on the 6-way side of the connector. Your best option would be to cut off the 6-way on your trailer and then wire up a 4-way to the trailer wires. For that I would recommend the # HM48110. You will need to wire the 4-way up by function to your trailer and not wire color as they most likely are different. The yellow wire of the 4-way will...
    view full answer...
  • Adding a 4-Way Trailer Wiring Harness to a 2007 Chevy Monte Carlo LT
    To add a trailer connector to the back of your 2007 Chevy Monte Carlo LT you will need to hardwire in a harness using # 18252. This harness comes with a circuit tester which you will use to determine the functions of the vehicle tail light wiring to install the 4-Way. On the 4-Way, the white wire is ground and will attach to a clean bare metal surface. The yellow wire will connect to the vehicle's left turn and brake light wire. Brown will connect to the vehicle's running light/tail light...
    view full answer...
  • Installing Square 6-Way Trailer Connector On 2009 Ford Flex To Match Trailer Wiring
    If your trailer has a square 6-way connector I assume it has brakes. The other wire would perhaps be for a breakaway kit or interior lights on the trailer or a battery charger. If the trailer is setup with either of those functions, you will need to change the 4-way on your 2009 Flex to match the trailer. I recommend part # 37995. This has the trailer and vehicle side 6-way square connectors. You would need to remove the 4-way connector on your Flex and wire those wires to the 6-way....
    view full answer...
  • Options for Towing a Trailer with 7-way with Vehicle with 4-Way
    If you do not plan on using the brakes of your trailer you can splice a 4-way into the 7-way wiring so that you could control the taillights of the trailer. For that you could use the part # HM48110 to wire in the 4-way. Or you could just use a 7-way to 4-way adapter on the trailer like the part # 30717 and just tape up the extra wires that wouldn't be used.
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lori W
Expert Research:
Lori W
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010