Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Create your own cord or replace the damaged ends on your RoadMaster 6-wire straight and Flexo-Coil electrical cords with these 6-pole, male and female connectors.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Roadmaster 6 Wire Trailer and Vehicle End Connectors. Now, these parts will let you create your own cord or replace the damage ends on your Roadmaster 6 wire straight and flexi-coil electrical cords with these 6 pole male and female connectors. Now, one connector, this one right here, will wire to your tow vehicle, has the nice finger pull design to it that will help you to insert it into the socket or remove it from the connector. The other connector, right here, will wire to the vehicle that's being towed. It includes this nice spring-loaded cap that will cover the connector when you pull out the plug, to keep it protected from the elements. Also, on the back, you notice you can pop off this rubber boot and it gives you where your connection points are, so you just wire to these connection points, actually first, you've got to run your wire through here, bring it out, make your connections and then, just slide this up and that will cover it. On your other connector, what you'll want to do is loosen this screw right here, this little Phillips head screw, and this will pop out with your connection points.
Loosen this screw, run your wire through here, make your connection points. Push the connector back in. Put the screw in to attach it down and then tighten this screw and it will hold the wire cord in place so it doesn't pull on there. When you go to connect it then, you just open up your cap, take your connector, push it right in, oop, turn it the other way, and when you push it in, it will plug right in and then, if you notice, there's a little tab right here. That will hold that connector to keep it from being pulled out, and then to remove it, just lift up on the cap and you'll be able to pull, it's a tight connection, pull it right out, just like that. That should do it for the review on the Roadmaster 6 Wire Trailer and Vehicle End Connectors..
Average Customer Rating: 4.8 out of 5 stars (42 Customer Reviews)
Create your own cord or replace the damaged ends on your RoadMaster 6-wire straight and Flexo-Coil electrical cords with these 6-pole, male and female connectors.
This was easy to install looks great and works excellent. have had on issues with this product my trailer lights are always working and keeping me safe.
Excellent customer service! Thank you, Sheila!
Installed a Blue Ox Base Plate kit on a 2015 Cadillac SRX. The base plate arrived promptly and was well packaged considering its weight. Watched the videos etrailer provides and used them as a step by step video guide. The videos were a big help. Installation is not too difficult if you're mechanically inclined. Had someone help with the installation but one person can perform the installation. I think the base plate is well engineered and everything fit as it should. Love the fact the installation is so well hidden. We have about 400 miles on the installation and have had no issues. Thanks to etrailer for a great price, great service, and great product support.
I didn't use the male end, it's in the tool box for later use. I used the female end on the front of my Jeep GC for the light hook up to my motorhome. I used mounting bracket #118137 and wiring harness RM-154 to complete the wiring part of the set up. Everything installed nicely, and a year later is still working great.
All of the products I have purchased through etrailer have been of great value and their prices are very competitive with other suppliers, most are usually lower.
I set up my Ford Taurus to pull behind my Motorhome. I purchased all of the parts needed, from the baseplate, wiring kits, and all other miscellaneous parts. Besides saving me a lot of money on their initial cost, they came with detailed instructions so I could install them myself.
I have used this product for a full year now, and 7,000 miles, mounted on the front of my towed vehicle behind the motor home. It was easy to install (had to build my own mounting bracket) and has functioned reliably. Filled the boot cover with silicone to keep moisture out. Perfect fit for my application.
Purchased this Heavy Duty 6 Wire Trailer LIght/Brake Connector for a 20,000lb equipment trailer and it works perfect. Any products I have bought from etrailer have always been of good quality.
Etrailer has what you need in stock and ships it out quickly. This is the kind of service I like when working on a project that needs completed quickly to get back on the road. The 6 pin connector and 6 conductor cable that I ordered are quality items. The cable is very flexible and not stiff like the cheap stuff. A great addition to the trailer fix.
Delivery was quick, and the product was just what I needed to finish wiring up my trailer. Thank you.
I was surprised to find these connectors available at such a reasonable price, and doubly surprised at the excellent quality and workmanship of the received product. I fully expected to need soldering iron and crimp tools to assemble the connectors and cables. The solid screw-down (and weather protected) connection points were a very pleasant surprise.
As advertised, only thing that would have been helpful is a wire diagram for a standard hook up. There is letters next to each terminal but had to ask Google for a bit of help. Other than that it's a great buy and super easy to install. I changed from a four plug to six at the front of my jeep tow bar.
Great to set up my braking system for flat towing.
Great product. Performed as expected. Prompt shipping. Great doing business with etrailer.com.
Works perfect looks great on my Honda goldwing which I use to pull my roll a home camper the small size is perfect for a motorcycle!
Great quality, price and fast delivery!
Thanks,
A A Smith
This is a replacement part and is exactly the same as the part replaced not a substitute.
Excellent product. Outstanding service by etrailer.
Good product.
Ben H.
12/29/2020
Works great no problems.
Easy to install and great customer serv ice
Product met my expections and was delivered in a timely manner
Makes great connection
Worked.great
Excellent quality
Exactly what I needed for towing my Jee p.
Looks good, hope it lasts long time.
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kerry B.
7/11/2017
Still working great, has never caused a problem.