bing tracking image
  1. Trailer Wiring
  2. Tekonsha
  3. Trailer Connectors
  4. Vehicle End Connector
  5. 4 Flat
  6. Plug and Lead
Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector

Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector

Item # 119190
lowest price pledge
Retail:$120.58
Our Price: $61.88
You Save: 49%
Trailer Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.91 lbs
Quantity: 
In Stock
Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector Vehicle End Connector 119190
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This ModuLite harness offers peace of mind by including circuit protection to safeguard itself and the tow vehicle from harmful electrical shorts and mis-wire situations. The upgrade also includes the ability to work with PWM on vehicles. Lowest Prices for the best trailer wiring from Tekonsha. Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector part number 119190 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (34)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Trailer Wiring - 119190

  • Trailer Connectors
  • Vehicle End Connector
  • 4 Flat
  • Plug and Lead
  • Tekonsha

This ModuLite harness offers peace of mind by including circuit protection to safeguard itself and the tow vehicle from harmful electrical shorts and mis-wire situations. The upgrade also includes the ability to work with PWM on vehicles.


Features:

  • Short circuit protection safeguards itself and the tow vehicle against harmful electrical shorts and mis-wire situations
    • Automatically self-resets
  • Virtually eliminates draw on the vehicle's tail light circuit
  • Taillight circuit has been upgraded to work with vehicles using Pulse Width Modulation (PWM), allowing converter to fully turn on, giving trailer lights full brightness during activation
  • Powers the trailer's stop, turn, tail and running lights directly from the tow vehicle's battery
  • Unit prevents feedback from trailer to vehicle system
  • May be used on 2- and 3- wire systems
    • When used on 2-wire systems, brake wire on harness must be grounded
    • Adapts a 3-wire system on the towing vehicle to work with a 2-wire system on the trailer
  • Will work on vehicles and trailers with either LED, incandescent, or standard bulb tail lights
  • Works with most multiplex wiring
  • Optional install kit (118151 - sold separately) to help run wire to vehicle battery


Warning: Overloading circuits can cause fires. Do not exceed:

  • Maximum stop/turn light: 4.2 amps
  • Maximum tail lights: 7.5 amps



119190 Heavy Duty ModuLite with Circuit Protection

Installation Details 119190 Installation instructions


California residents: click here



Customer Reviews

Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector - 119190

Average Customer Rating:  4.5 out of 5 stars   (34 Customer Reviews)

This ModuLite harness offers peace of mind by including circuit protection to safeguard itself and the tow vehicle from harmful electrical shorts and mis-wire situations. The upgrade also includes the ability to work with PWM on vehicles.

- 119190
by:

After a lot of head scratching, looking for shorts, internet searches, and checks with my meter, I finally figured out that my camper tail and marker lights were dim because of low voltage. My 2000 Ford Econoline Van didn't have the trailer towing package. So, Ford ran the thinnest wiring to the tail lights which, of course, couldn't carry the voltage necessary to the camper. After another search on the internet, I came across your wonderful site. You had exactly what I needed to solve my problem. The videos and descriptions on your website convinced me of the product I needed. The Q&A sections are awesome as well! The only negative on the product was the wiring to the right turn/brake light wasn't long enough for my van, but that was an easy fix with some solder and another length of wire. I also ordered the ModuLite Installation Wiring Kit, Item # 118151 to run from the Modulite module to the battery. Twenty feet of wire wasn't enough to get to the battery through the interior of my van, but did get me to the front of the engine compartment. Again, hardly a problem as I had a length of 12 gauge braided wire to complete the lateral run across to the battery. The Valterra Electrical Cable Hatch for RVs - 4-9/16" Diameter - White Item # A10-2137VP was a perfect drop-in fit on my '92 Jayco. Your website is great and I will recommend you to anyone that needs parts or advice for their trailering and camping needs! Fast, accurate shipping, expert advice in the form of videos, descriptions, and Q&A, phone advice (if you need it), along with a great selection make ETrailer the BEST. THANKS!


Comments
All working as they should.
Young D - 06/17/2019



- 119190
by:

Super easy to install in my existing system, so I can haul pickup truck trailers with my semi tractor. All lights on the trailer work as they should. However, I'm getting a weird feedback, in that my trucks 2 side marker lights are now lit any time the trailer is connected. I need to do a little wire chasing to find the fault, but I hope it's not this unit- shouldn't be since it's designed not to allow feedback. I will update my review when I figure this out.



- 119190
by:

First, as to the product: As others have commented, the lack of installation instructions was a little disconcerting. George helped me find the directions online, and everything went well from there. The installation took me about 1 1/2 hours, and I don't work fast. This was a replacement for an older, cheaper Hopkins converter. That one had developed the habit of blinking both turn signals anytime the brake lights were also on. The Tekonsha fixed that, and, as a bonus the brake and turn lights are brighter now. Turning to customer service, in most things etrailer is great. I ordered with two day shipping, and the product was shipped immediately and came via UPS in two days. George was very reponsive to my request for directions emailing a response in an hour. The one disappointing thing was when I called the number after "Call to talk to a product expert", not only did I not get a product expert, the CSR didn't really comprehend what I was asking about. However, she got Bill to call me back, and he answered my questions competently.


Comments
Pretty good, but not perfect. After a few months use, I started noticing the same problem I had with the Hopkins - the off-side lights blinking alternately with the on-side. But faintly. I dont think its enough to be a safety problem, but a little discouraging nevertheless.
Randy C - 09/08/2018



- 119190
by:

After one year of use, my "Tow Ready" is working fine. The trailer lights are bright and the Tow Ready unit has not affected my Sprinter van's current monitored rear light wiring. My only wish is that the turn signal and brake lights were two different bulbs and not combined into one. (I like yellow turn signals on my trailers with separate red brake lights.) With this Tow Ready unit, the brake light flashes on and off when the turn signal is on. Other than that, its perfect. Todd from Wisconsin.


Comments
All is still good with my Tow Ready. The trailer lights are working fine. Glad I bought it.
Todd - 05/04/2017



- 119190
by:

RECIEVED EVERYTHING AS ORDERED IN VERY LITTLE TIME



- 119190
by:

The green wire for the pass side turn signal needed an extension if you have the rear cd changer and navigation dvd rack. 2006 BMW x5. Otherwise easy install takes about 1.5 hrs


Comments
Mike, I have a BMW X-5 as well but I am not sure which wires to connect to. It appears they use the same wire for the brake as the tail light. Cant figure out the reverse light either? Can you help me?
-- comment by: Doug K - 07/11/2015



- 119190
by:

I purchased this product to convert the 3 way tail light system in my Freightliner FLD 120 truck/tractor to use for my agriculture trailers that use a 2 way light system. I have several trailers I use and each of them have a lot of lights, so I needed a powered converter. I had tried using a non-powered converter first, and the hazard lights would not flash since the tail lights exceeded the maximum 2.1 amps of the converter. This product has a maximum limit of 4.2 amps and meets the amperage requirements for the conversion. I have converted my Freightliner to haul gooseneck style trailers which come wired with electric brakes and a 7 pin RV connector. I installed the converter up in the dash area of the truck connecting to the wires located there. The RV connector is not compatible with the 7 pin commercial truck wiring so you have to make some wiring changes in addition to the conversion from 3 way to 2 way. But as to this product, it works great. I needed my converter shipped overnight because of a time factor on a must have basis, and eTrailer did just what was needed and the product arrived as promised. Also eTrailer had a tech contact me personnally to answer some questions about another product I had purchased from them over 5 years ago and was most helpful on that issue. As far as my opinions go, this company is great to do business with and I would highly recommend them for your trailer and wiring needs. They know their product, believe in customer satisfaction and customer service, and can solve your trailering problems and issues.



- 119190
by:

This product solved the problem of my 2017 F 350 thinking it always had a trailer attached when it didn't. I have additional lighting on my truck, and the truck was "sensing" a trailer was attached. By adding this unit, the truck is back to normal.


Comments
Still working, no issues.
Marc L - 04/02/2018



- 119190
by:

Exactly what I needed. Great customer s ervice!!



- 119190
by:

I have a 2012 VW Golf TDI. It has very strange wiring, but does work with this Modulite (119190). The issue is that my Golf has a 2 wire setup, but it is the running and brake lights that share bulbs, not the turn signals (it is possible to pick up individual signals for the running lights from the car's license plate light and to use the center brake light...but it's hard to get to them). But, I was surprised in my testing that this converter works fine like this. I used the red wire for picking up the combined brake/running signal, and left the brown wire unconnected (however, I will go back and ground it). Turn signals hook up normally.


Comments
Still working great 18 months later.... I dont use the trailer that often, but its nice that the lights always work when I hook it up!
Roger - 06/09/2014


- 119190
by:

This Circuit Protected wiring harness is essential for use on any BMW that has not been factory pre-wired for a trailer. These cars are prone to electronic board failure ($4000.) if a standard wiring harness is used...do not do it - it will void the car warranty. This product is the only one I found that is suitable. Beware that there are others on the marketplace that are similar but do not provide adequate protection to the vehicle wiring and circuits. U-Haul has a very good one that actually has an LED feature on the 4-Flat plug that makes it simple to verify that each of the wires are connected properly and functioning however theirs does NOT provide protection when both brake and tail lights share wires. This review may not make sense to some readers but your BMW dealer and any knowledgable trailer hitch installer/supplier will know exactly the importance of using this exact product. Great product, very fair price and very quick delivery from etrailer.



- 119190
by:

Had some issues with my previous three wiring harnesses. Excellent customer service by etrailer led me to this harness. Over 90 hours of pulling with this harness and no issues, no shorts, and still working.



- 119190
by:

Excellent Service I ordered a heavy duty modulite wiring harness. It was processed and shipped to me in a very prompt time. Could not be happier with e-trailer. Will recommend them to all.



- 119190
by:

Worked great. Took little time wiring together but beats paying $700 for a new fuse box on my 2003 Dodge 2500 just to have a right turn and brake on my 7 pin trailer connector



- 119190
by:

Installed and works great! Previously bought a Hopkins converter and it did not work with my truck despite the packaging and retailer saying that it was the correct one for my truck. After hooking up the ModuLite to my truck every thing shined like magic. Thanks again for the excellent product.



- 119190
by:

Great simple wiring system to replace my old worn out and patched-a-hundred-times wiring. Worked great. Not only good products, but the e-trailer guys are easy to work with, always helpful, and ship super fast. They are my go-to resource for all my trailer parts.



- 119190
by:

I used this connector on my Victory Vision motorcycle. The device has work worked as expected. What Im very disapointed with, the unit did not come with any instructions, wire identification would have been helpful.



- 119190
by:

Ordered a similar product for my truck based on a Q&A from this site. Upon receiving the product I found it to be the wrong one. The customer service person was extremely helpful in getting me the right item, rush shipping included and sending me a prepaid return label for the incorrect item. Unit installed as specified and works great. I have tried it on two separate trailers with no issues.



- 119190
by:

The upgraded HD modulate appears to be of good quality. The service is the best.



- 119190
by:

Easy fix for the dodge ram trailor light internal fuse problem. A lot cheaper to use this product than 400 for a new fuse box from Dodge. Customer service was very nice helping me out. Product was easy to install. Took about and hour.



- 119190
by:

Quality product, easy installation. Great service from etrailer.



- 119190
by:

The wiring is fully functional - we had it installed by a professional.



- 119190
by:

The product was delivered overnight just as requested. It is so difficult to find a company nowadays who not only will have the products in stock but that will also ship them as you have requested. Even though I requested overnight shipping on the product, I was honestly not expecting it to arrive until a couple of days later. I was presently surprised when it arrived the next day.



- 119190
by:

Fast and easy. Top notch product and a great price.



- 119190
by:

Products arrived in timely manner.


26
35
Show More Reviews

Ask the Experts about this Tekonsha Trailer Wiring



  • Can Power Wire for Trailer Wiring Harness be Connected to 12 Volt Outlet on 2013 Volkswagen Tiguan
    No. The issue is that wiring harnesses # 119190 or # 119190KIT are tested and rated for a connection to the battery only. Installing them using any other method could cause undesired operation. Also, if connected to a 12 volt outlet, you will lose that level of circuit protection between your 2013 Volkswagen Tiguan and the trailer. Routing the wire is just time-consuming but not really difficult. I have included a link to a help article with tips on routing the power wire for you.
    view full answer...
  • Installing Trailer Wiring Harness Part #119190 on a 2013 VW Tiguan
    Some vehicles combine stop and tail light functions onto 1 circuit and then also have an additional tail light function wire that is independent of the stop (such as your 2013 VW Tiguan). These vehicles will require that you attach the trailer light power module red “stop” wire to the same combined circuit on the vehicle and then attach the brown “tail light” circuit to the independent circuit on the vehicle.
    view full answer...
  • Cost Effective Solution for Fixing Trailer Wiring Harness on a 2006 Dodge Ram 1500
    What I would do in your situation is install the # 119190 and not mess with paying a ridiculous amount of money to have your TIPM replaced or reflashed. This harness will bypass all that nonsense and will give you a 4-way harness. If you are looking to use a 7-way trailer harness what you could do is cut the 4-way off of the # 119190, and then cut the harness of your factory 7-way and wire up the wires of the 4-way to the correct pin locations on your 7-way. For a wiring diagram check...
    view full answer...
    Image 1 for
  • Troubleshooting Turn Signal Malfunction on a 2004 Ford Escape Using a Modulite Wiring Harness
    When your lights are acting strangely, or stop working, what is most likely the problem is that you have a ground wire that is not connected as it should be or a short in the system. With the # 119190 wiring harness connected, I would recommend checking the white ground wire to make sure that it is firmly connected to a clean piece of metal on the vehicle frame. Buildup, rust, and paint can all cause interference with the ground connection. The best way to determine where the problem...
    view full answer...
  • Which Version of Upgraded Heavy Duty Modulite Circuit Protected Vehicle Wiring Harness is Available
    The newest version of the upgraded heavy duty modulite, # 119190, is the type with all of the wires going in/coming out on one side like we show on the product page. The older version had wires going in one side and coming out the other side.
    view full answer...
    Image 1 for
  • Can a Modulite Trailer Wiring Harness be Installed Under the Hood of a Vehicle
    Technically, you could install the Heavy Duty Modulite # 119190 anywhere that it will fit, including under the hood. But since it is meant to wire into the vehicle tail light wiring for trailer lights the easiest place to install it would be the rear of the vehicle. Otherwise you are running all of the tail light wires and 4-Way to the back of the vehicle which would require a lot of extra wire.
    view full answer...
  • Wiring a 2007 VW Eos 3.2 with Multiplexed Wiring for Towing a Trailer
    The 2007 Volkswagen Eos has a Multiplexed wiring system that requires wiring the Upgraded Heavy Duty Modulite Circuit Protected Vehicle Wiring Harness, item # 119190, for a trailer connector. There are 3 ways of wiring depending on how your vehicle is wired from the factory. In the instructions, at step 9 (see link), it explains that you may have a two wire system that requires the red stop wire to be grounded along with the white wire. If you have the 3 wire system (most likely) with amber...
    view full answer...
  • Wiring Harness on a 1990 Lexus LS400 Gets Hot
    A typical taillight converter can handle between 8 and 9.2 amps. I would recommend the Heavy Duty Modulite Circuit Protected Vehicle Wiring Harness, part # 119190. This converter is rated up to 15.9 amps, and is a Modulite system, which draws its power directly from the battery, instead of through the lighting circuits. Using this unit should solve your problem.
    view full answer...
  • Does 2010 BMW X5 Need Computer Flashed to Install Wiring Harness 119190
    Thank you for your purchase from etrailer of the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector # 119190. You can install this on your 2010 BMW X5 without the computer being flashed or coded before or after the installation. I have added a link below to a video review and install for you to check out as well of the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector # 119190.
    view full answer...
  • Trailer Wiring Harness for 2013 VW Tiguan
    The # 119190KIT would work great on your Tiguan. There is no difference between the 119190KIT and the 119191KIT, they are both the same part. Tow Ready sells the part two ways, as # 119190, which doesn't include the wire to run to the battery or the inline fuse, or as # 119191 which includes the wire and the fuse. We sell it as 119190 without the wire/fuse and 119190KIT with the wire/fuse. I've linked to the install instructions, but they're pretty general in nature. Use a circuit tester...
    view full answer...
  • Trailer Wiring Harness for 1999 Lexus RX300
    PWM stands for Pulse Width Modulation, which is a particular wiring system that some vehicles use. Instead of having a single wire for each different circuit, PWM will use the same wire for two or more circuits by using varying pulses for different functions. PWM is a fairly recent technology, your RX300 uses a more traditional wiring system. The # 119190 converter you mentioned would work well for you, but I recommend the # 119190KIT that includes the wiring kit that includes the wire...
    view full answer...
  • Recommendation for a Trailer Wiring Harness for a Victory Vision Motorcycle
    I would recommend using the Upgraded Modulite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector, item # 119190KIT, which is the wiring harness that you mentioned. The 119190KIT includes the all of the wiring needed and a circuit tester to help determine the wires to splice into for the tail light functions. The # 119190 wiring harness is a powered harness that draws only about 5 milliamps from the vehicles tail light circuits and provides power to the towed trailer...
    view full answer...
  • Plug and Play Trailer Wiring Harness for a 2008 VW Passat 4Motion Wagon with Park Sensors
    Good news! We now carry a wiring harness that has been verified to work on your 2008 VW Passat Wagon with 4Motion and park sensors. The Tow Ready Custom Fit Wiring, # 118530, will provide a no-frills 4-pole flat trailer connector for your vehicle, and easily installs with plug and play connectors. The only splicing required is for running the power wire for the converter to the vehicle battery, see instructions link. It is possible that the forum you found has the correct information for...
    view full answer...
  • Will Tekonsha Upgraded Heavy Duty ModuLite Draw Power Without Trailer Connected
    No, the Tekonsha Upgraded Heavy Duty ModuLite # 119190 will not draw any power on your 2013 Harley Davidson Tri Glide after installation unless a trailer is connected to the tow vehicle. Basically the black wire draws power from the battery so it will always be "hot" but this is no different than a 12V circuit that you'd plug an accessory in or that exists on most pickups today. We have the Wiring Kit # 118151 that you can use which includes the wiring, fuse, and connectors you need to...
    view full answer...
  • Trailer Wiring Harness Installation Instructions for Tow Ready 119190KIT on 2013 Volkswagen Tiguan
    The installation instructions for Tow Ready 4-pole trailer wiring harness # 119190KIT are linked for you. I also included a link to a video showing installation in a 2013 VW Passat. This harness features a substantial current output of 7.5 amps for tail lights and 4.2 amps for each stop/turn circuit. It works with vehicles and trailers having either standard incandescent bulbs or high-efficiency LED types.
    view full answer...
  • Why Did Tekonsha Upgraded ModuLite Harness 119190 Not Include Power Wire, Fuse, Or Connectors?
    Thank you for purchasing the Tekonsha Upgraded Modulite # 119190 through us! This harness actually does not include the black wire or connectors, as you did not order the complete kit # 119190KIT. To get the black power wire and connectors/fuse to complete the install on your 2014 Audi Q7 you will need the install kit # 118151. I included an installation video for you to take a look at.
    view full answer...
  • Is Taillight System of 2005 Dodge Ram 3500 a 2 Wire or a 3 Wire
    Your 2005 Dodge Ram has a 3 wire system. To install the 119190, the green converter wire would tap into the right turn signal circuit, the yellow into the left turn circuit, the brown into the running light circuit , the white would ground and the red wire would connect to a brake lamp circuit. If you're wanting a hardwire kit, I'd go with the # 119190KIT, which includes the kit for running the power wire to the vehicle battery and the circuit tester which aren't included with the # 119190. Going...
    view full answer...
  • Recommended Trailer Wiring Harness for 2013 Audi Q7
    The trailer wiring harness I recommend for 2013 Audi Q7 is the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness part # 119190 which is for just the harness or part # 119190KIT which is for the kit which includes wire connections, wire, and a circuit tester. The reason you must use this harness is because the Audi Q7 has a pulse width modulation feature that not all harnesses can decipher. The Upgraded Modulite Vehicle Wiring Harness with 4 Pole Trailer Connector part...
    view full answer...
  • Difference Between Tekonsha 119190 and 119190KIT Powered Taillight Converters
    The difference between the two is that the # 119190KIT provides the wire to run from the rear of the vehicle, the fuse holder, a circuit tester and quick splice connectors while the # 119190 includes the taillight converter only. Having a fused battery connection is necessary in order for the converter to function, but if you don't need the circuit tester and the quick splice connectors (which I don't recommend using anyway), you can purchase the wire, fuse and fuse holder separately...
    view full answer...
  • Best Trailer Wiring Options for 2017 Audi Q5
    For your 2017 Audi Q5 you'd want the version of the trailer wiring harness you referenced that comes with the power wire you'd run up to the battery with the part # 119190KIT but technically the # 119190 would work too but you'd need to run additional wire to the battery. I attached an install video link for this for you to check out on a very similar 2016 Q5 as well. Not to make your choice any harder but the best option is the Curt harness # C56404 which is custom fit instead of universal...
    view full answer...
  • Trailer Wiring Harness for a 2013 Mercedes GLK350
    For 2013 there were 8 versions of the Mercedes GLK. Diesel motors were available on the 200, 220, 250, and 350. Trailer wiring harness # 119190KIT is a universal type of item though and should work just fine on your 2013 GLK350 even though it is not officially listed as a fit.
    view full answer...
  • Need Trailer Wiring Harness for 2006 Land Rover Range Rover HSE
    Emailed Customer 04/29/15 Good Morning Stephen, I just want to clarify. Do you have the Range Rover Sport HSE or the Range Rover HSE? Thanks,
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2010 Chrysler Town and Country
    The correct harness for a 2010 Chrysler Town and Country is # 118552. This is the updated converter that is rated for 7.5 amps stop/turn lights per side and 7.5 amps total for running lights. It is a powered converter that requires a direct connection to the vehicle battery but that should not be an issue if you already have one in place. This harness plugs in line with the vehicle tail light wiring so no splicing is required. The hardwire harness would work in the same manner but it...
    view full answer...
  • How to Install Trailer Wiring Harness # 119190KIT on a 2010 Volkswagen Tiguan Wolfberg Edition
    According to Tow Ready, the 2010 Volkswagen Tiguan needs to be wired using the BM-4 code in the instructions (linked for reference). This would mean that the brake lights, turn signals, and tail lights are combined onto 1 circuit for each side of the vehicle. So you will attach the yellow wire for the converter to the left side wire on the vehicle that carries those 3 functions, the green wire attaches to the combine 3 function wire on the right side. The red and brown wires will ground...
    view full answer...


< Previous
123. . .49



Do you have a question about this Trailer Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Jacob T
Video by:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Jeff D
Installed by:
Jeff D
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Matthew S
Test Fit:
Matthew S
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.