Arrives before Christmas 
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (1612 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Easy to use and attach when needed. Recommend the product and the service provided by etrailer and Jessie
Communication with customer service was stellar
Very easy to install Done in about an h our
Jason was great to work with on getting the proper camper tie downs for my truck as it was a new truck and was a bit confused as to the proper application.
I had them installed within an hour. Even an armature bolt twister could do this!
I have used my camper a lot since putting these on my truck and will tell you these are THE MOST SECURE ANCHORS I have ever used on any of my trucks PERIOD!
You will not make a bad decision going with this product. I recommend these tie downs over any product available! I Don't normally give recommendations or endorse products. These I am truly impressed with.
Awesome!!!! Worth every penny!!!!
1ST CLASS PRODUCT!!! FIT & FINISH WERE EXCELLENT!
ASSEMBLY INSTRUCTIONS WERE VERY CLEAR AND EASY TO FOLLOW. PICTURES WOULD BE A WASTE OF TIME & BANDWITH. SEE MANUFACTURE'S U-TUBE VIDEO.
PAPER WORK INCLUDED IS REALLY ALL YOU NEED.
BUY SOME MM DEEP WELL & REGULAR SOCKETS WITH Impact Swivel TO USE WITH AIR WRENCH - PNEUMATIC GUN.
Bought these with the front tie-downs and I'll give this the same review. Good product, easy to follow directions, and perfect fit.
Easy to install stall.Hold the camper down great .
Outstanding product. Wondered if it was the worth the extra $’s. Perfect fit,easy install. No doubt its worth the money
Exactly as described and as usual fast shipping.
These tiedowns were exactly as advertised and fit my 2023 f350 4wd crew cab perfectly using preexisting holes and mounts. They even came with wire feeders to feed the bolts through the holes on the frame. Instructions were very good and easy to follow. Can adjust the width of tie down and can also drill new holes to customize the width. I highly recommend these.
Delivery was fast. Works perfectly for our Lance slide-in camper.
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
The TorkLift Tie Downs are perfect for our truck camper . They make all the differences for making us feel the camper is save and attached as needed. A must have if you are adding a truck camper
I bought both the front and rear tie-downs for my old Lance truck camper on a 2023 Ford F-250. Once installed they work great; very heavy duty. But the thing I liked most was the detailed instructions for installation. Everything needed came with the tie-downs and they were perfectly fitted to my F-250. All I needed was my old torque wrench. Installation probably took less than 2 hours.
Easy to install. Very strong and love the idea the mounts are hidden when not in use. Had bedrail tie downs before then upgraded to forklift. Etrailer was there with excellent customer care/support. Above and beyond. Will definitely use etrailer for any future needs.
Got a 2003 Chevy 3/4 ton with a Palomino slide in and the Torklift products hold it all together. GREAT PRODUCTS
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.