Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (1606 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.My brother installed these and he used air tools. The brackets fit perfectly. The instructions were thorough. They bolted right in and the only delay was the disconnect/reconnect of the e-brake cable to install the driver's side bracket (2019 RAM 3500). After all the parts were laid out, he installed all 4 brackets in an hour.
He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.
One of the rear brackets came in the package as being the wrong one. I simply got a hold of customer service and they sent me the correct one and made it easier to send back the incorrect one.
Product was easy enough to install, works as designed, very happy. Shipping boxes continue to be an issue, not up to the job!
Rusting after 6 weeks I’m not happy
Jenny N.
7/16/2024
Unfortunately rusting can happen depending on how much road debris has dinged up the tie downs. I recommend touching up the tie downs with a rust resistant paint like Rustoleum to help protect against rust.
Easy to install. Took less than an hour with no helper. They are very sturdy and I expect them to last.
2020 RAM 3500 with OEM hitch.
THESE TORKLIFT CAMPER TIEDOWNS ARE AMAZING ! MY CAMPER HAS NOT SHIFTED NOR HAVE THESE BRACKETS SHOWN ANY FATIGUE . I RECOMMAND GETTING THESE !
Tiedowns are great and relatively easy to install. Expedited shipping took one day longer than expected.
Feel strong and solid with the camper but already seeing some rust in places. Wish the aluminum had been in stock.
I verify that TLD3112 fit the 2024 Ram 3500 8 ft bed with class 5 hitch. Good instructions, very easy installation. Remember to have a torque wrench handy to finish up.
The service I received finding what I needed was great, shipping was pretty quick, the product fit perfectly and was easy to install myself
Fit perfectly and fast shipping !
This was a no-drill installation on a 2020 Ram 3500 using factory bolt locations. If your truck has a Mopar retractable bumper step, it must be removed in order to install the driver side tie-down. In my application, carrying a Lance 650, the draw-bar extended out too far from the truck. I had to drill another hole in the draw-bar so that there was clearance for my TorkLift Fastguns to attach.
Unable to install, all hardware lost in shipping, contacted Etrailer and they said they would send me replacement hardware, that was three or four days ago. I have not received any updates about the new parts or if thay have been shopped.
Brooke M.
10/7/2021
Thank you for letting us know. Our customer service team should be reaching out to you in the near future.
I paired these with the front mounts and am totally pleased. Easy to install and simple to use. I would recommend these for any size camper, not just the juggernaut class ones. They keep your camper rock solid and not wallowing around like you see some of the bed-mounted brackets.
Once I received the product, it took me about 2 hours to install. Was simple, and the instructions were easy to follow. Looks great on my Ram 3500.
Good fit to my vehicle.
Fit was excellent and easy to install
Torklift mounts are easy to install and are the only mount that will fit on my 2019 Ram 3500 contrary to what Happijac might tell you. They install to the frame and are out of the way until I put the camper on. The frame extensions are easy to put on and secure the camper without the need to do additional drilling. I"m sold on this system
Overall these things work great and are a much better solution than any other tie-down system. Installation wasn't overly difficult, but I did have to remove my factory bed step, so it would be nice if they had a solution to allow the factory bead step to coexist with the tie-downs.
I find the overall price a bit high for what is provided. I think a price of $400 for all four or $250 for two (either front or rear) would be much more reasonable.
Excellent product
Installed easily, had to remove fold out bumper step on my Ram as they occupy the same space and instructions say won't fit with step so knew that going in. Didn't want the bumper mount type so small sacrifice for a superior product.
Easy installation on a 2020 Ram 3500 Dually. Most difficult part of the Front Tie Down installation was removing the emergency brake cables. The Rear Tie Down installation was extremely easy. This Tie Down is a quality product.
Great tie downs, only took a few minutes to install, not kidding, zip the 3 existing bolts out, hold the tie down in place and zip the bolts back in, then add the supplied 4th bolt, done!
AWSOME I have an arctic fox 990 on a 2022 Dodge Ram and it is snug as a Bug
Best tie down out there. A little complicated on front drivers side but follow instructions and [online] instructions and you’ll be fine.
Do you have a question about this Truck Camper Tie Down?
Condition: Surface Scratches
Notes: Item has several scratches and scrapes. Otherwise new and unused.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jennifer
3/22/2022
These are still working perfectly.