9004 LED Headlight Bulbs with Anti-Flicker Harness - Dual Beam - 1,995 Lumens - Cool White - Qty 2

Video Transcript for Review of ARC Vehicle Lights - Concept Series 9004 LED Bulbs Anti-Flicker Harness - ARC67VR

Ellen: Hey everyone. I'm Ellen [email protected] and we're going to be taking a look at the led 9004 style bulbs. These are also going to come with the anti flicker harness. So this is a great replacement for any kind of a factory bulb. We want to replace it at 9004 style, and they also has a canvas or PWM equipped vehicle. Basically, this is just going to alleviate that problem of the light flickering or not really powering on the whole time in those vehicles whenever you try to plug in an led light.

The easiest way to figure out if this is a fit for your particular vehicle is to use our fit guide [email protected]. If you haven't done so already, you'll just put in your year, make and model of your vehicle and then search for the vehicle lights category, and then go from there.But these are going to be a nice upgrade from your factory lights. They have a precision optic design, so that's going to throw the light farther. It's a nice, cool white color as well. So that helps promote better visibility at night.

I've got one kind of mocked up here, so you can see how bright it is. So I'm going to turn that on and we can check out how bright those lights are, even with the lights out of my studio. So you can see pretty nice bright light, definitely throws the light really far, kind of blinded myself just now. And then it also has a high beam function or it'll sort of change the angle of that light. It's pretty settle.

So it's hard to see we'll zoom in a little bit and get a better idea of the brightness of those lights. So it just changes a little bit there.You can also adjust the angle of the light to fit in your housing. So it's an easy way to get that properly aligned to match up with your lighting housing. And this wiring is a plug and play application. So you don't have to worry about cutting or splicing.

It's just going to plug in and match right up to that wiring. The ends for the harness are the same as the lights. So they all just plug in together and then plug in line with your factory wiring. It also comes with a couple of pieces of double-sided foam tape for mounting up this box.That's a part of your harness and then a couple of small zip ties as well. For the same purpose. It does have an integrated cooling systems. So that's going to help to protect it from any kind of overheating and also helps to extend the life of that ball by preventing any kind of premature failure. It works with 12 volt DC systems and it is IP 67 rated. So basically that means that it's going to be insulated from any kind of shock damage and also from water and dust. So no worries about any water. Does Mickey any ingress there As far as the specs, again, we do get two bulbs, one for either side and two harnesses. The raw lumen output for each bulb is 3000 lumens. The effective lumen output is 1,995 lumens. After about 30 minutes, that drops down to the stable lumen rate of 1,550 lumens.Basically the difference between those numbers, the raw lumens is the potential output of the lights in a perfect world. It's going to be 30 or 3000 lumens with environmental factors and power factors as well. It drops down to at the effective lumens, which is more like the real world application. So that's about 2000 lumens, which is still a very bright light. And even after 30 minutes, 1500 lumens is still pretty bright as well. The color temperature is just that color of light. So that's going to be 6,500, which has that nice, cool white light that you saw. The wattage per bulb is 16.5 Watts. The power draw at 13 volts is 1.3 amps per bulb. And the operating voltage is 7.5 volts up to 16 volts, DC. They are covered by a two year limited warranty, and that's really about all there is to it for our look at these lights. I hope this video has been helpful again, I'm Ellen [email protected]. Thanks for watching..