Replace one of the dual-beam headlights in your Opti-Brite conversion kit (HLL70HLB-2) with this DOT compliant light. Rear-facing LEDs and metallic parabolic reflector create a broad, smooth beam. Powder coated die-cast aluminum housing is rustproof.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this replacement five-inch by seven-inch headlamp for the Opti-Brite Sealed Beam to LED Kit. Now this light will replace a damaged headlamp from that Optronics Opti-Brite Headlight Conversion Kit. It's part number HLL70HLB-2. That kit we do sell separately on our website.
This is one of the replacement headlamps if you need one to replace a damaged one. Now, this uses LEDs. They are super-efficient, ultra-bright, long-lasting. They give you about 30,000 hours of life. And of course, they have a lifetime warranty on the LEDs.
What's nice on this one, they use rear-facing LEDs and a metallic parabolic reflector that creates a nice broad smooth beam. At the end of this video, I'm going to hook it up to some power just to show you what we're talking about.Gives you a low beam and a high beam light pattern. The low wide beam will cover more of the road and the high beam makes it easier to see at a distance. Does use a nice durable Surface-mount technology, construction of your LED circuit board. It'll help better withstand shock and vibration and allows for improved heat distribution.
It does use a nice impact resistant polycarbonate lens. And the housing on it is a powder-coated die-cast aluminum housing, which is rust-proof. It does have an IP67 rating for industry-standard protection against dust and moisture. The plug on it is designed to accept an H4 three-blade wiring connector, which we do sell separately on our website. And it says compatible with 12 volt DC and 24 volt DC systems.
It is DOT, Department of Transportation, compliant, and its light does meet the Federal Motor Vehicle Safety Standard 108 and the Canadian Motor Vehicle Safety Standard 108 requirements for automotive lighting.It says for one LED headlamp. It is 12 LEDs on the inside. Give you a few dimensions on this. The overall width of it from one end to the other, it's going to be right at just under eight inches, about seven and 15, 16ths of an inch. The height of it's going to be five and five eighths inches tall, and the total depth from the front to the very back, it's going to be right about three and a half inches deep. Now power draw on this at 12.8 volts. For the low beam is 0.85 amps. For the high beam is 1.13 amps.So what we're going to do is go ahead and hook up some power to this. We'll get a ground, and we'll do the low beam, and then the high beam. So with that all hooked up, we go ahead and turn on our power and you should be able to see the low beam on there. And with your low beam on, we're going to go ahead and turn off the overhead lights and give you a good view of that. And then when you hit your brights, you can see that'll come on and give you a lot more light for easier to see at a distance. I'll go ahead and turn back on our overhead lights and turn off our power.But that should do it for the review on this replacement five-inch by seven-inch headlamp for the Opti-Brite Sealed Beam to LED Kit..
Average Customer Rating: 4.2 out of 5 stars (13 Customer Reviews)
Replace one of the dual-beam headlights in your Opti-Brite conversion kit (HLL70HLB-2) with this DOT compliant light. Rear-facing LEDs and metallic parabolic reflector create a broad, smooth beam. Powder coated die-cast aluminum housing is rustproof.Excelent service and product, fast deli very.
My fire department is purchase a new Pierce fire truck. LED headlights from Pierce are over $1500, our salesmen recommended I buy some online instead. I did some research and found these headlights to be the best bang/buck for quality and price. I first installed them on our 1994 Pierce fire engine and have installed another set of Low and Hi beams on our 2014 Pierce fire engine, a third set will be ordered when we take delivery of our 107' Pierce ladder truck. The lights look great and throw off a nice bright white compared to the yellow of the old sealed beams. The only reason I cannot give these 5 stars is that they are not plug and play. I had to re-pin the wire plugs in order for these to work on both fire engines. After installing the first pair I thought maybe in was a fluke but when I had to switch the same wires on another fire engine that is 20 years newer I knew it was not a fluke. Not a big deal, if you have a test light and are only moderately handy its an easy fix. But for someone just looking to swap a bulb it is more involved then that.
These headlights were a great upgrade for our fire engine. We have to engines, both with LED high and low beams. Zero issues and nice bright white lights. We even ordered a 3rd set for our brand new fire truck. Pierce wanted over $1000 to upgrade to LED headlights so we did the upgrade ourselves for less than half the cost!
Does not hold up well. Lifetime warranty but takes forever to get replacements. I have chosen to go to other brands with better warranty service.
The headlights were nice, the shipping was excellent, the electrical connections were plug and play as well. The only downside is that the lights are not that great. The light is super bright and has a nice white color, but the light beam itself is very streaky. It looks good in the garage, but on the road it is incredibly hard to see the pavement when driving.
Help from Lori was great. I called Optronic's to see if head lights would fit my Jeep. Person on phone told me they didn't know and offered no additional help. Discovered etrailer carried these so called them. Lori didn't know, so she called Optronics tech support, found out they did, called me back, and placed the order. All was completed within 20 minutes. Lights arrived in 3 days. Good price as well. A COMPANY AND PERSON THAT UNDERSTANDS CUSTOMER SERVICE. Thanks Lori, great job!!
Also worked with etrailer last summer to replace all lights on my enclosed trailer. Upgraded to LED. Had the same excellent service. Thanks etrailer.
The fit and connections were perfect. Delivery was quicker than expected. Installation went quickly. I would use Etrailer again and also recommend.
Not worth the money or wait to get them. Not much brighter than sealed beams and no dimming for the DRL's. Very disappointed.
Works great
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.