To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Features:
Specs:
The air springs and jounce springs in this system work together to give you the best ride whether your truck is loaded or unloaded. Air Lift's LoadLifter 5000 Ultimate air springs have internal urethane foam jounces that protect the air springs and provide added ride comfort when your air pressure is low. The jounces also allow you to temporarily carry a load if the air springs lose air pressure. This gives your 3/4- or 1-ton pickup, motor home, or commercial truck air springs that are easier to maintain.
Carrying heavy cargo in your truck bed or trailer puts extra stress on your truck. Your brakes erode faster, your tires wear unevenly, and handling suffers severely. When towing, you might also experience excessive sway, bottoming out, and even inaccurate and unsafe headlight aim.
By pairing your existing suspension with LoadLifter 5000 Ultimate air springs, you can seriously beef up your suspension, ensure equal load distribution, and get the support you need. The springs provide up to 5,000 lbs of load-leveling capacity (depending on the weight-carrying capacity of your vehicle) and distribute the weight of your payload to all 4 wheels. As a result, the stress on your factory suspension is significantly reduced. LoadLifter's air bags are adjustable from 5 to 100 psi for precise support, and they can be inflated equally for front-to-back leveling or independently of one another for side-to-side leveling.
The air springs are made of high-quality, 2-ply, fabric-reinforced rubber. Most air bags lose air at the ends where the bag is enclosed with steel caps. These caps can rust and corrode over time, creating small holes. But the endcaps on Air Lift air bags are fashioned from corrosion-proof Zytel nylon, a material that is both stronger and lighter than steel, ensuring that the air bags won't lose air.
The air bags also have Air Lift's exclusive roll plates, which protect the air springs and beef up their load capacity. These sturdy plates help guard the springs from moving parts under your vehicle that might puncture the air bags. The plates also provide a larger surface area for each spring to roll on. The extra surface area gives you a higher spring rate at a lower air pressure, resulting in a better ride.
The closed-cell urethane jounce spring inside each air spring gives you a more stable, comfortable ride. Each jounce acts as an overload spring and engages when your current air pressure level isn't enough to support your load. So on a rough road, the springs will kick in if needed to absorb bumps and shocks and help you to avoid bottoming out. When the jounces support a load, they adjust progressively - the more weight you pile on, the stiffer they become. The urethane material engages more smoothly than rubber jounces so you get a less jerky ride.
Because these jounces are taller than your factory jounce bumpers, they engage sooner than your factory jounces would to provide better support. And if the LoadLifter 5000 Ultimate air springs have insufficient or zero air pressure, the internal jounces will help to temporarily support your suspension and protect it from damage until you can repair or adjust the air spring system.
This system installs with the included brackets and hardware. Just mount the springs, inflate them, and ride. To inflate the LoadLifter springs, you just have to pump in air through the inflation valves. A line kit is included with the springs so that you can install the manual inflation valves (1 for each spring). These are typically mounted on the bumper but can be installed anywhere that is easily accessible. If you want to make the springs even easier to use, you can get a compressor and gauge system (sold separately) that allows you to monitor and adjust the springs from the cab of your truck.
Along with a lifetime warranty that has no mileage restrictions, Air Lift offers a 60-day satisfaction guarantee. Just install and use LoadLifter 5000 Ultimate springs for 60 days, and if you are not satisfied at the end of this time, you can remove and return them for a full refund.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Instructor Today we're gonna be taking a look at Air Lifts line of LoadLifter 5,000 Ultimate Air Helper Springs with internal jounce bumpers. These bags are specifically designed for three quarter and one ton trucks and motor homes, you're big heavy dogs here. These bags are a custom fit for your particular truck so you want to use our fit guide to ensure you get the appropriate hardware and brackets to install them. To show off our airbags, we're going to add about a thousand pounds of water weight to the back of our truck. We're working with a Chevy Silverado 3,500 today, but the principles are the same regardless of your vehicle. Having your vehicle loaded down like this, bringing the back down and the front up, changes the geometry of your suspension, and it also changes the way weight is loaded onto your front brakes.
So this causes poor handling, as well as poor braking performance. By adding air bags into the back of our vehicle, we can raise the back of our vehicle back up, and that's also gonna help restore the suspension closer to that factory ride height as well. That's gonna give us better contact on the road with our tires so they don't wear excessively fast, it's gonna increase our handling because we're going to have better contact to the road, and with it level back up here at the front again, our weight's gonna properly transition onto the front brakes restoring a lot of that loss breaking performance. Another added benefit is by bringing the back of our vehicle back up, we're picking our headlights that we're pointed up towards the sky and bringing them back down on the road, so we we're able to see better at night as well. And here we can see our airbags installed.
They're going to sit between the axle and the frame of your vehicle, and they'll provide up to 5,000 pounds of leveling support. Now this doesn't increase the amount of weight that you can carry with your vehicle, that's just how much these can help to support and lift your vehicle back up to restore that lost ride height that you had from being weighed down. Inside of our airbag here, there's a jounce bumper, and what that does for us is in the event that we've got it so loaded up and we hit a really big bump, and our axle moves up. If it we're to go up so far, it could contact the internal jounce bumper and that's going to prevent any metal on metal contact, And it's also going to save our bag from any potential damage. This is mostly for when you get really heavily loaded, really pushing it, getting close to the maximum load limit of your vehicle, that jounce bumper can really come in handy when you're maybe doing some good speeds and you hit a pretty big pothole or something like that, that could save you and your vehicle from any issues.
To further increase the structural integrity of our bag, there's roll plates on the top and bottom, so as our vehicle goes to sway to the left or to the right, when we're making invasive maneuvers or just regular turns, the bag as it wants to lean to one side of the other, from that sway can contact on the roll plate here, and that'll provide it with additional support to ensure that our bags stay in place doing their job. The double convoluted design will help increase the structural integrity of our bag. It gives it a higher burst pressure by displacing the air as necessary as it moves up and down. And to further ensure the durability of our gags, they're constructed of a two ply fabric reinforced rubber, and they're very durable here. They have a increased size on that internal jounce bumper as well.
The urethane bumper is a little bit taller so it'll contact a little bit sooner, and that's really nice if you maybe haven't adjusted your air pressure quite yet, either. Maybe you've loaded it up and it's still a little bit lower pressure, that jounce bumper is always gonna be in there to provide contact, and then if you find that, hey, you're hitting that jounce bumper, it's a little stiff, you can up the air pressure a little bit to help bring that away and get the best ride quality, as well as the best support. You also receive a heat shield in your kit, this is gonna further protect your bag from any excessively hot sources, such as your exhaust here. You'll receive clamps with it and everything, so that makes it nice and easy to get that installed, and it's very easy to position it and however you need to for your particular exhaust system. So it's nice, even if you upgrade your exhaust system, you'll still be able to use something like this. Included with your kit, you're gonna receive airlines and all the hardware you need to get it installed. You'll receive two air fittings so that way you can inflate each bag independently from one another. This is nice if you're trying to correct any uneven loads, but really in most cases, when you're loading down your truck, you typically want to load both of your bags the same to just bring that support back up and level your truck back out, and in those instances, the easiest way to do it will be to install a compressor on your vehicle. On this vehicle, we've installed Air Lift's WirelessONE compressor, and this is one of the easiest compressors to install. It's completely wireless and you can operate it with your phone, so you don't have to worry about losing any kind of device when you're trying to inflate it. And you don't even have to get out of your truck to inflate it. So you could pull up to a place and have somebody drop a pallet in the back of your truck, adjust the pressure on your phone and take off. The operating range of our bags is between five and a hundred PSI. Five pounds is when we're just normal driving around, completely unloaded. It is important to have five pounds in there because as your suspension moves up and down, it can create a small vacuum in there if you don't have any pressure, so we just keep that five pounds in there. And then for your heaviest loads, we can go up to all the way to a hundred pounds to provide that support. Just wanna keep in mind that up at those higher pressures it does get pretty stiff, and in most cases, about 40 to 50 pounds is gonna probably be sufficient. And that completes our look at Air Lift's line of their LoadLifter 5,000 Ultimate Air Helper Springs with internal jounce bumpers..
Average Customer Rating: 4.7 out of 5 stars (1017 Customer Reviews)
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.