bing tracking image
  1. Vehicle Suspension
  2. SuperSprings Intl
  3. Jounce-Style Springs
  4. Front Axle Suspension Enhancement
  5. Light Duty
SumoSprings Solo Custom Helper Springs - Front Axle
SuperSprings Intl

SumoSprings Solo Custom Helper Springs - Front Axle

Part Number: SSF-202-47
In Stock
You Save: $15.80
Vehicle Suspension

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

1,800-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation. Great Prices for the best vehicle suspension from SuperSprings Intl. SumoSprings Solo Custom Helper Springs - Front Axle part number SSF-202-47 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2368)
  • Q & A (0)
  • Photos

SuperSprings Intl Vehicle Suspension - SSF-202-47

  • Jounce-Style Springs
  • Front Axle Suspension Enhancement
  • SuperSprings Intl
  • Light Duty

1,800-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.


  • Helper springs upgrade your vehicle's front suspension for improved driver control and comfort
    • Support heavy front-end loads to keep your vehicle level
    • Help to absorb bumps and shocks
    • Minimize sway
  • Progressive load control - springs compress according to the weight of your cargo
    • Lighter loads - springs compress easily at first for soft engagement and a less bumpy ride
    • Heavier loads - springs compress by as much as 80 percent for support
  • Springs work independently from each other to compensate for off-center loads and reduce body roll during sharp turns
  • Durable microcellular urethane
    • Works in temperatures from -25 F to 200 F
    • Resists damage caused by oils, road salts, and UV rays
  • Minimal lateral expansion - springs compress vertically instead of to the sides so they aren't easily damaged when operating in tight spaces
  • Maintenance-free - no tubing to run or air pressure to monitor like with air springs
  • Simple, no-drill installation
  • 4 Jounce-style springs included
  • Made in the USA


  • Weight capacity (at 50-percent compression): 1,800 lbs
    • SumoSprings will not increase your vehicle's weight-carrying capacity
  • Limited lifetime warranty
  • 30-Day satisfaction guarantee

Front Suspension Support

A heavy front load, such as a snowplow or a winch, can cause front-end sag as your factory suspension compresses under the weight of the load. This means that the front axle is trying to support not only the extra load but also the weight of your vehicle. And because there is less weight on your rear axle, your rear tires make less contact with the road, which causes problems with traction, steering, and braking. SumoSprings upgrade your vehicle's factory suspension to level your vehicle, improve driving performance, and keep your ride comfortable.

Installed spring when it is not compressed

SumoSprings provide progressive load control - the more you load them, the stiffer they become. With a lighter load, the springs will compress easily for soft engagement and a less bumpy ride. The closed-cell urethane material allows for smooth contact between the springs and your vehicle. And the springs act like a shock absorber to dampen road vibration.

Installed spring when it is compressed

The springs can also compress by as much as 80 percent to support a heavy front load and to help your factory suspension bear up under the load. This evens out the weight, which levels your vehicle and ensures that your rear tires are making better contact with the road. A level ride means that you have improved driving control, ensures safe headlight aim, and helps to minimize sway. The springs also support your factory suspension, which helps prevent sagging and reduces bottoming out.

The springs work independently from one another to support each side of your vehicle. This action helps to reduce body roll when you make a sharp turn. This also helps compensate for an off-center load.

Durable, Custom-Fit Springs

These microcellular urethane springs are tough. They resist abrasion, oil, salt, and UV rays that can more quickly wear out other springs, and they perform well in temperatures ranging from -25 F to 200 F (-33 C to 93 C).

SumoSprings compress vertically with minimum expansion to the sides, so they won't be damaged by nearby mechanical parts and they fit safely into tighter spots. And unlike air springs, SumoSprings require no maintenance or adjustment.

The helper springs are custom designed to fit your vehicle, and they install easily - no drilling required.

SSF-202-47 SuperSprings Sumo Springs Solo Front Vehicle Suspension Kit for Trucks

Replaces SSF-202

Installation Details SSF-202-47 Installation instructions

This Product Fits The Following Vehicles

Customer Satisfaction Score:

Customer Reviews

SumoSprings Solo Custom Helper Springs - Front Axle - SSF-202-47

Average Customer Rating:  4.7 out of 5 stars   (2367 Customer Reviews)

1,800-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.


I bought the sumo springs for the front of my 16 2500hd Duramax. The install was really simple Chanel lock pliers twist and pull old ones out and a little glass cleaner and a small pry bar pushed new ones right in. Went with the sumo springs over the timbrens cause I didn’t want the truck sitting on the stops and the sumo springs still have about 1 inch before they touch control arm so normal ride isn’t affected only have the added support when I install my V plow
Very satisfied with etrailer and the sumo springs thank you

2019 Chevrolet Silverado 3500

Installed in a 2019 3500HD Chevy Dually for a little extra support with an upcoming bumper. These do help dampen with potholes and railroad tracks. Takes the sharpness of the hit out which is nice. Big props to the folks who can install these in 30 minutes. Old ones were a nightmare coming out and the first two Sumos not much better. Ended up putting them in the, freezer for a while which seemed to help on the next two. Quality product though, and Etrailer is great as usual.


Easy installation, very good performance. no worry about air line or compressor failure.

2016 GMC Sierra 2500

Product appears to dampen front end response so far to hard bumps. I definitely rate the install on these things LOWER than POOR. The instructions lead you to believe that you can simply twist and push these in place. This is not the case for the home mechanic with a floor jack. I had to take the truck to a mechanic and he threw all kinds of muscle, people, pry bars, and other items at these to get them to seat properly. Once in, they appear to function as intended. I would suggest you consider the fact that you may need outside assistance when installing these things.



I installed Sumo Springs on our 06 Xterra right after we bought our Casita 17' trailer. The back of the X squatted a bit more than I liked. I had also noticed before some tendency to bottom out if the car was full of people and stuff. These ingenious devices are a perfect solution for me! They are about 3/4" clear of being engaged with the axle when unloaded, so the ride is not overly affected, but progressively take up some of the weight when the back end starts coming down with load. It now sits very nicely with the trailer connected, no weight distributing hitch and stuff in the back, and no more bottoming. We've put a good number of miles on the X in the last year, towing and not towing, and they are still doing the job.

I should note, the back of my Xterra is lifted about an inch with AAL springs. If that were not the case, the Sumo Springs would be engaged all the time. That will vary with vehicle.

I will also note that they are non-adjustable, unlike airbags. I kinda like that, I didn't want to mess with adjusting air pressure and such. But once they do start kicking in as one or both wheels travel, they do stiffen it up quite a bit. I mean, there's no way around that; you can't take load without stiffening the suspension. As such I think they inhibit upward axle articulation a bit when 4-wheeling, but for us that's not a big deal. Since they do not connect to the axle, they don't affect downward articulation at all.

The pics are shortly after installation, one with the car unloaded, and two with trailer and gear loaded up.


Very easy installation in about 20 minutes. Very ingenious concept as opposed to bolt on leaf style helper springs


I believe it’s going to be a great addition to my truck when pulling our RV. Looking forward to a smoother, more even ride. I left the 2x4 blocks in overnig8ht and drove around to ensure a good seat for the springs.


I originally purchased the yellow sumo for additional support when hauling a small trailer or taking trash to the dump so I wouldn’t strain the vehicles suspension that I just replaced . I also never like to see a truck squat . Yellows were too stiff when unloaded so I got these blues sumo and it was a great decision . The ride type is back to original “comfortable” and the sumo still provides great handling when cornering reducing body sway / shock absorbing bumps. A good investment !


Gave it 5 because of ease of install - note they use SAE threads 9/16, truck frame and oem is metric 15mm wrench. Makes no difference but don't use oem nuts on spring. I installed all shims supplied and this left about 3/4" gap so hoing its the best for my needs. Easy to reduce if needed.


I used the Sumo spring with the RAS system. I remove the pump stops and installed the sumo(without spacer) so the axle would be one inch from sumo so the RAS does the work when not pulling trailer and sumo sumos are activated with pulling the camper. The stability it created on highway and back winding roads was really great. Feels like a totally different truck when loaded up. The RAS came with an offset spacer to move the bump stop in a better place but I didn’t need it because the bracket with the sumo springs moved the unit back and in and had plenty of clearance for the RAC system. In total they only took15 minutes each side to install once the truck was up and the tires were off. The sumo spring and RAS together were amazing and would recommend them to anyone with an F150 that need a little more support near the bumper.


These were shipped to me mid-trip so I had a good chance to do a before and after with same loads/ same roads for 3100 miles. They were easy to install (in my daughters driveway) in about an hour with one reluctant bolt in the original bump stop. I did not install the hard spacer, I figured I’d add it later if needed. I was able to do the install w/o jacking up the whole truck using a 1 1/2 ton jack under the hitch receiver w/ a jackstand next to it. I needed just a few inches as there’s lots of room under the stock height truck (I was lying on a piece of cardboard). The helper springs didn’t quite touch the axle when the jack was removed. When I first drove it in town with the Sumo’s on it they were not really noticeable. When loaded up with my 22’ Livin’ Lite Axxess trailer (4300lbs with 650lb hitch weight) the rear end would squish into the overload springs a good 3/4” but the truck was about level w/o rear end sag.
Driving home over many of the same roads I noticed it was better over railroad crossings and rhythmic bumps on the highway that previously pitched it fore and aft. The trucks manners were much better overall during big hits (like hitting a curb- yup) and pulling off-highway. The trailer is low so it doesn’t go very far off road so I can’t report on that.
Overall for ease of ordering, of install, simple usage w/o need of airlines and effective control of the rearend of the truck and the trailer I feel they deserve the 5 stars.


I bought and installed the 1000lb Sumo Solo springs to help alleviate rear end squat on my 2024 GMC Canyon Denali when pulling my boat. My boat trailer has a long mono tongue with no weight distribution installed. The boat weighs in at about 5500lbs, the truck fender lip measures 38” high unloaded, once I dropped the hitch down on the ball and the Sumos picked up the load, the fenders measured 36.25” equating to an inch and 3/4 squat. Empty the Sumos have an apx gap of 7/8” above the frame rails. The Sumos were recommended over the Timbrens for my situation of infrequent towing with this truck and to maintain the best ride possible when not towing. So far my ride is virtually unchanged when empty and feels controlled when towing. Installation is straight forward but the instructions could be a little clearer with a diagram showing the intended location of the springs. Luckily an etrailer customer had already done the install and provided some pics so there was no question. I chose to remove the tires to have good access and I’d do it again this way. I supported the truck with a jack stand under the receiver. IMHO the proper method to locate the over frame upper clamp brackets is to push the forward clamp as far forward until it contacts the bed stiffener and you’ll be in the correct location then let all the hardware hang to position itself, tighten as required and enjoy.


These Sumo Springs were easy to install, even for a 70 year old guy. I tow a 7,000lb camper and even tho I have a nice WDH I still had som sag on my Tundra. These helped level it out when towing and got rid of “some” of the bounce. They were really a godsend when I overloaded the bed with about 2,000lbs of pavers. That weight squished the Sumos significantly but the truck drove and rode great. Better and less expensive than air bags.


The SumoSprings Solo came to the RV Resort today. I installed them on my Titan SV today in less than an hour. Only drove 10 miles with them and they are what I was looking for. In my opinion it was a needed upgrade and thumbs up!


First, etrailer has always been awesome-unparalleled customer support and product selection. For the Sumo Springs, I’m conflicted on what to say. I think they work great. I have a Ram 1500 and I installed them to pull a larger travel trailer and they certainly took the sag out and leveled the truck. We did a trip from Maine around Lake Superior and they felt great.
The short story is that after some time probably 6 months they collapsed. That being said Sumo Springs was quick to replace them, but it was no fun reinstalling them. They blamed it on the cold weather, but hell, I live in Maine. We’ll see how this winter treats the new ones.


I have had these on my Jeep Gladiator for over a year now and I still like them. Sumo Springs really help with sag when towing my Scamp camper trailer and when the truck bed is loaded with stuff. When it is cold outside they are stiffer and I can feel when they hit the stops on hard bumps. Sumo Springs are a very easy overload spring option with factory lift.


Big difference in pulling the rv. I have about 545 lbs of Tongue weight.The sumo springs help with the swaying.Thanks again.


Works great on 2020 ford ranger. Left out the extra spacer because I don't want it riding on the leaf spring all the time. This gave it almost an inch clearance before the sumo touches and starts to help. That is what I wanted to not have it as stiff initially offroad, etc.


The Sumo Springs are probably the top purchase for my 5th wheel. Our ride is smooth and I believe it extends the life of my suspension. If you're going to RV full time, I would consider these a necessity. Put them on your RV and your truck. You'll be glad you did.


While these worked great for the first few months and helped level the load, they have now become deformed and squished out of shape permanently. We have a slide in camper that is on the truck for only for trips otherwise the truck is unloaded and off the bumps. I did not expect them to deform so much, and so easily after only a year of use.


Gotta little 2000 ranger 4x4 that pulls my home made 5x10 off road camper.Was squating and bouncing pretty bad with the 25 year old factory springs.Got these and put them on in about 30 minutes without even jacking it up. Dropped the spare tire for a little more room under there. Was the most worried about the 25 year old rusty bolts holding my bump stops on. I sprayed PB blaster on them a couple of days and no problem, if you don't count the ratchet slipping off and causing me to rip a chunk of meat out of my 71 year old arm. Don't worry, all my projects have some of my DNA on them.Everything went great after that, easy peasy. Before you tighten everything up, make sure the bumper mounting bolt is lined up with the vehicle bump pad or the new bumper won't hit the center. Just finished the install haven't pulled my trailer around yet. I'll do that after the first aid on my arm.LOL.


The Sumo Springs make the ride stiffer on rough asphalt roads. When the road is relatively smooth the ride is exceptable. They dont seem to handle the load like a air bag or progressive leafsprings but are working for my application right now.


Fairly simple to put on but need to work around the brake lines and bed cross beams. I haven’t tried it yet with weight. I have enclose pic of drivers side. Maybe can’t tell from the pic but there is space and flexibility around the lines around bolt.


We pull an off-road teardrop camper with our 2013 Toyota Tacoma and were looking for a little help with the rear end sag when we have that hitched plus putting some weight in the back of the truck (firewood, water, etc). Our Tacoma is lifted (2.5") but the lift kept the stock springs with an added Deaver leaf to help with the notoriously soft Toyota springs. However, with the shell and ~300 pounds of weight in the back, it still sagged, especially with another 250 lbs of tongue weight from the trailer. The Sumos have eliminated that sag, even with bigger loads in the bed, eliminated body roll (also notoriously bad with Tacomas) and didn't destroy the ride for day to day driving. There might be a slight bit more stiffness when hitting speed bumps, but definitely not bad at all. If anything, I would say it IMPROVED the ride and handling.

The springs themselves were simple to install, less than half an hour start to finish. Some reviews have said they were bumping the frame after installing but we had about 1/2" gap on both sides. The only "specialty" tool would be a torque wrench capable of 90 lbs to get it to spec.

We considered Firestone air bags but after talking with the reps at e-trailer, we decided on these and couldn't be happier. Reasonably priced (half the price of air bags), no maintenance, great customer service...can't argue with anything at all.

Show More Reviews

See what our Experts say about this SuperSprings Intl Vehicle Suspension

  • Suspension Enhancement Options For A 2024 GMC 3500 Experiencing Sway With A Truck Camper
    Hey Marc, When it comes to anti-sway bars the thicker the better they'll perform so you'll want measure the thickness of your current bars and swap them out accordingly. The thickest options we offer for your 2024 GMC Sierra 3500 are the Hellwig Front Anti-Sway Bar - 1-1/2" Diameter # HE79TR and Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter # RM25FR. We don't currently offer replacement shocks but you can't go wrong with some Bilstein 5100's. You can also install SumoSprings Solo Custom...
    view full answer...
  • Recommended Front Suspension To Improve Ride Quality On a 2022 Chevy Silverado 3500 Dually Diesel
    I recommend installing the SumoSprings Solo Custom Helper Springs # SSF-202-47 for your 2022 Chevrolet Silverado 3500 dually diesel. These are our lightest capacity jounce springs at a 1,800lb so they will not give you a harsher ride. The 2,500lb Springs # SS66RR are stiffer so they will not absorb as much shock due to the denser material. I would only recommend Timbren Springs # TGMFK25D If you were adding a bunch of weight such as a plow. The Timbren creates a very harsh ride quality...
    view full answer...
  • Does EcoHitch Front Hitch for 2020 Chevy Silverado 2500 Have Capacity for Motorcycle Carrier
    The EcoHitch front hitch part # EH57FR that you referenced has a vertical load limit of 1,000 lb so it would easily handle the weight of a 300 lb motorcycle. Front suspension enhancement would be a great idea to help give additional support when carrying the motorcycle. The SumoSprings Solo part # SSF-202-47 would give you the best support and ride quality so it would be what I would recommend.
    view full answer...
  • Front Suspension Upgrade for a 2020 Chevy Silverado 2500
    Yes, you should definitely upgrade the front suspension on your 2020 Chevy Silverado 2500 if you're going to be using the EcoHitch Hidden Front Mount Trailer Hitch Receiver item # EH57FR. That much weight will put a lot of stress on your factory suspension and ball joints. The SumoSprings Solo Custom Helper Springs - Front item # SSF-202-47 have an 1,800 lbs capacity. These will support the heavy front-end loads you are going to be placing on your truck and it will keep your front end level....
    view full answer...
  • Front Suspension Enhancement Recommendation for a 2015 Chevy Silverado 3500
    The SuperSprings Vehicle Suspension # SSF-202-47 that you referenced comes with enough bump stop replacements to do the front end of your 2015 Chevy Silverado 3500. Since there are two per side on your vehicle a total of 4 comes with this kit. I attached a set of installation instructions to the right for you to check out as well.
    view full answer...
  • Front Hitch Receivers Available for 2015 GMC Sierra 3500 Denali
    The one front-mount hitch available for your 2015 GMC Sierra 3500 Denali is the Curt model # C31071. This offers no-drill installation and the linked video will show you the process and final appearance. There is a Draw-Tite hitch offered # 65078 but this is not a fit for the Denali. If you plan to use a heavy front-mount accessory such as a plow or cargo carrier you might consider a front-axle suspension kit like a set of rubber jounce springs such as # SSF-202-47. This no-drill kit...
    view full answer...
  • Recommended Parts Needed For Carrying a Motorcycle On The Front Of a 2015 GMC Sierra 3500 Dually
    I would recommend adding some SumoSprings Solo Custom Helper Springs # SSF-202-47 to the front of your 2015 GMC Sierra 3500. Your factory suspension on the front of your Sierra is not designed for the additional weight of something like a motorcycle being carried on the front of it. The SumoSprings are a progressive spring that provide up to 1,800lbs of capacity to assist the front suspension in supporting the additional load. The Ultra-Fab Dirt Bike Carrier # UF48-979033 will pair well...
    view full answer...
  • Can Timbrens Be Installed On a Lowered 2018 Chevrolet Silverado 2500
    The best suspension enhancement option we have for a 2018 Chevrolet Silverado 2500 that is lowered is the SumoSprings Solo Custom Helper Springs part # SSR-207-47 for rear or part # SSF-202-47 for front which can be trimmed to better fit the space you have available. That said, the Timbren Rear Suspension Enhancement Systems like part # TGMRTT35D will not work as they simply won't fit in the space you have available most likely and cannot be trimmed.
    view full answer...
  • Is Front And Rear Suspension Enhancement For A 2021 Chevrolet Silverado 2500 Recommended?
    The TorkLift StableLoad Rear Suspension Upgrade with Quick-Disconnects - Lower Overload Springs # TLA7310 you were looking at for your 2021 Chevrolet Silverado 2500 are only a fit for the rear suspension of your truck as the front suspension has coil springs instead of leaf springs. Using the # TLA7310 without any enhancement in the front is just fine, and would likely give you the enhancement to your suspension you are looking for while still being able to have the factory ride quality...
    view full answer...
  • Recommended Front SumoSprings for 2020 Chevy Silverado 2500 When Towing
    The SumoSprings Solo Custom Helper Springs part # SSF-202-47 would be a great option for a 2020 Chevrolet Silverado 2500. These are a middle of the road option which are what I recommend since you won't be putting weight directly into the front of the vehicle like you would with a snowplow or other items as such. That said, you'll see the biggest improvement from rear improvements, the SumoSprings Rebel Custom Helper Springs part # SSR-203-40-2 which are what I recommend.
    view full answer...
  • Front-Mounted Trailer Hitch For A 2013 Chevy Silverado Moving A 11,700lb GVWR Trailer
    Hey Devin, With how heavy the trailer is the custom-fit front-mounted trailer hitches wouldn't have enough capacity so you'd have to go with a weld-on adjustable fit trailer hitch. We offer a few different drop lengths that you can choose from to hopefully line the receiver tube up either in the slot above the bumper or below the bumper to avoid trimming it. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18"...
    view full answer...

Do you have a question about this Vehicle Suspension?

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Tricia G
Updated by:
Tricia G
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Noah M
Updated by:
Noah M
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee David F
Test Fit:
David F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.