bing tracking image
  1. Vehicle Suspension
  2. SuperSprings Intl
  3. Jounce-Style Springs
  4. Rear Axle Suspension Enhancement
  5. Light Duty
SumoSprings Solo Custom Helper Springs - Rear Axle

SumoSprings Solo Custom Helper Springs - Rear Axle

Item # SSR-610-40
Retail:$320.45
Our Price: $282.63
You Save: $37.82
Vehicle Suspension

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 5 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
1,000-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation. Great Prices for the best vehicle suspension from SuperSprings Intl. SumoSprings Solo Custom Helper Springs - Rear Axle part number SSR-610-40 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2182)
  • Q & A (0)
  • Photos

SuperSprings Intl Vehicle Suspension - SSR-610-40

  • Jounce-Style Springs
  • Rear Axle Suspension Enhancement
  • Light Duty
  • SuperSprings Intl

1,000-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.


Features:

  • Helper springs upgrade your vehicle's rear suspension for improved driver control and comfort
    • Keep your vehicle level when you're towing or hauling a heavy load
    • Help to absorb bumps and shocks
    • Minimize sway
  • Progressive load control - springs compress according to the weight of your cargo
    • Lighter loads - springs compress easily at first for soft engagement and a less bumpy ride
    • Heavier loads - springs compress by as much as 80 percent for support
  • Springs work independently from each other to compensate for off-center loads and reduce body roll during sharp turns
  • Durable microcellular urethane
    • Works in temperatures from -25 F to 200 F
    • Resists damage caused by oils, road salts, and UV rays
  • Minimal lateral expansion - springs compress vertically instead of to the sides so they aren't easily damaged when operating in tight spaces
  • Maintenance-free - no tubing to run or air pressure to monitor like with air springs
  • Simple, no-drill installation
  • 2 Jounce-style springs included
  • Made in the USA


Specs:

  • Weight capacity (at 50-percent compression): 1,000 lbs
    • SumoSprings will not increase your vehicle's weight-carrying capacity
  • Limited lifetime warranty
  • 30-Day satisfaction guarantee


Rear Suspension Support

Towing or hauling a heavy load can cause rear sag as your factory suspension compresses under the weight of the load. This means that the rear axle is trying to support not only the extra load but also the weight of your vehicle. And because there is less weight on your front axle, your front tires make less contact with the road, which causes problems with traction, steering, and braking. SumoSprings upgrade your vehicle's factory suspension to level your vehicle, improve driving performance, and keep your ride comfortable.


Installed spring when it is not compressed

SumoSprings provide progressive load control - the more you load them, the stiffer they become. With a lighter load, the springs will compress easily for soft engagement and a less bumpy ride. The closed-cell urethane material allows for smooth contact between the springs and your vehicle. And the springs act like a shock absorber to dampen road vibration.


Installed spring when it is compressed

The springs can also compress by as much as 80 percent to support a heavy rear load and to help your factory suspension bear up under the load. This evens out the weight, which levels your vehicle and ensures that your front tires are making better contact with the road. A level ride means that you have improved driving control, ensures safe headlight aim, and helps to minimize sway. The springs also support your factory suspension, which helps prevent sagging and reduces bottoming out.


The springs work independently from one another to support each side of your vehicle. This action helps to reduce body roll when you make a sharp turn. This also helps compensate for an off-center load.


Durable, Custom-Fit Springs

These microcellular urethane springs are tough. They resist abrasion, oil, salt, and UV rays that can more quickly wear out other springs, and they perform well in temperatures ranging from -25 F to 200 F (-33 C to 93 C).


SumoSprings compress vertically with minimum expansion to the sides, so they won't be damaged by nearby mechanical parts and they fit safely into tighter spots. And unlike air springs, SumoSprings require no maintenance or adjustment.


The helper springs are custom designed to fit your vehicle, and they install easily - no drilling required.



SSR-610-40 SuperSprings Sumo Springs Solo Rear Vehicle Suspension Kit for Trucks

Installation Details SSR-610-40 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

SumoSprings Solo Custom Helper Springs - Rear Axle - SSR-610-40

Average Customer Rating:  4.7 out of 5 stars   (2182 Customer Reviews)

1,000-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.

by:

These Sumo Springs were easy to install, even for a 70 year old guy. I tow a 7,000lb camper and even tho I have a nice WDH I still had som sag on my Tundra. These helped level it out when towing and got rid of “some” of the bounce. They were really a godsend when I overloaded the bed with about 2,000lbs of pavers. That weight squished the Sumos significantly but the truck drove and rode great. Better and less expensive than air bags.

Dan

8/4/2023

Great



by:
2014 Toyota Tacoma

Very impressed. Stopped the Tacoma lean. Also helped with the trailer. I do use a distribution hitch I bought from etrailer. Just bought the sumo spring for other applications. Those little bitty factory bumps where junk. These help with lean, and off road hard bounce.They are great.

Preston

8/23/2023

Lean still solved. Help add the trailer hau. USE in conjunction with wd hitch its definitely worked



by:
2015 Nissan Frontier

These things SUCK for the Frontier, they are very stiff. THANK GOD I ordered thru etrailer and not Supersprings directly, ''Supersprings'' seems like a good American company to deal with UNTIL, you have an issue with their product. They will jerk you around and try to sell you 'other' products to fix the issue instead of simply honoring their website stated satisfaction guarantee.

If you have a Nissan frontier BEWARE this item may not fit your truck unless its lifted. If your truck is stock it will constantly ride on these and you'll feel every bump on the road. When you explain this to Supersprings they will say something along the lines of ''Just throw some weight on the back of your truck''

Thats not helping me. Thank you Alex J at etrailer for understanding my issue and making it right. I went ahead and ordered the firestone adjustable airbags from etrailer.com I want to reiterate This is not complaint against etrailer rather against that awful company Super Springs.



by:

Easy to install. One easy hour and did not take tires off.

2013 Tacoma Pre-Runner

John J.

8/30/2022

They do their job and loving it. Im able to put max load 1650 lbs on my Tacoma and there is very little sag. Only a small complaint that has to do with the ride when unloaded. I had lay with the adjustable stock absorberá for a while finally findings a suitable ride. With the SUMOs having no clearence between the frame and the springs when installed, they cause a bumpy ride unless the shocks react very fast to attenuate it.



by:

These Sumo springs are just what I needed for my 2012 Nissan Frontier. We (wife and I) have a A-Liner camper. We have recently replaced torsion axle with a more robust one and also went from C range to D range tires. We needed something to reduce the sag of tongue load. I was unsure about which model to choose but after speaking with friendly, knowledgeable Customer service rep I was assured the 610-40 was the proper option. Test drive went extremely well. Only minimal drop in hitch and no adverse change in ride. Very pleased! Simple to install.



by:

Instructions were adequate. installer has to contribute to the outcome with bolt cleaning, match marking axle saddle and finding out "u" bolt torque value.
I think the mount should be radiused where the "u" bolt contacts it as opposed to the square edge. Was unnecessary to jack up truck to get clearance to screw on spring, I put a wood between frame and leaf and raised the box 1/2" with a wedge.
I got the ride height I was looking for, the blue springs are very close to offsetting trailer tounge weight allowing for a bit of takeup with my Andersen hitch.
Barely noticeable change in unloaded rear end stiffness.



by:
2013 Toyota Tacoma

I added these to my Tacoma. With the GFC camper, Solar panels, Marine battery and refrigerator in the back of the truck and the weight of the trailer tongue I gained over 2 inches of height in the back after adding the sumo springs. The body roll is much less now as well. The only dissappointment is not with etrailer or the Sumo Springs, it is with UPS. Initially they scheduled the delivery on Wednesday then changed it to Thursday. Thursday came in went and still didnt have it. Finally arrived on Friday. Thanks for the delay UPS.



by:

I originally purchased the yellow sumo for additional support when hauling a small trailer or taking trash to the dump so I wouldn’t strain the vehicles suspension that I just replaced . I also never like to see a truck squat . Yellows were too stiff when unloaded so I got these blues sumo and it was a great decision . The ride type is back to original “comfortable” and the sumo still provides great handling when cornering reducing body sway / shock absorbing bumps. A good investment !



by:

Made towing TT with my Toyota Tundra much better. My camper has a tongue weight over 900 pounds. Made bridge crossing and overpasses much smoother.



by:

After 1 year of use with over 8,000 miles towing and 6,000 miles normal road use, I find unloaded, there is a noticeable impact on the springs, but it is not jarring, on heavier bumps only. On good roads, they are not noticeable as there is a gap between the spring and the frame of the truck. Under load towing, there is definitely a benefit in keeping the truck level. Again, you notice they are there, but it just feels like stiffer springs which limit the travel you feel without them. 2017 Toyota Tundra with 27' Travel Trailer.



by:
2017 Toyota Tundra

This is the second pair if SumoSprings I have bought. The first pair of springs were Great coming my truck level with support trailering a 26 ft RV. My first truck was totaled last October by a bad driver.
I just bought enough pair SumoSpring in another truck to haul and support a big weight.
Thanks,
Bruce Forejt



by:
Nissan

Easy and affordable solution for carrying weight in a small pickup. ‘12 Nissan frontier



by:

RECIEVED PRODUCT YESTERDAY prepared truck for spring installation cleaned threads on U bolts removed fasteners removed factory stops installed super springs both sides within an hour !!!



by:
Toyota Tundra

Helped reduce some of the sag and bounce when towing our trailer with the Tundra.



by:
Toyota Tacoma

The sumo springs have been a very good addition to my Toyota Tacoma DCLB. I added a leaf and changed the shocks at the same time I added the sumo and the truck rides about a half inch above the sumo. I definitely can feel the sumo kick in when I compress the rear on bumps etc. non loaded. It’s not a bad thing but I don’t get the same travel but I also don’t slam on the bump stop. With that said, both driving with a loaded up truck and trailering has been much better than before. I can definitely tell the sumo doing its job. I towed a 4000lb boat the other day and the truck behaved perfectly.



by:
2002 Toyota Tundra

After about a year of installing Sumo springs on my 2002 Tundra, I am still quite pleased. I have driven about 15K miles with them in and while pulling a 2 axle travel trailer with about 600 pounds of tongue weight with weight distributing hitch plus another 500+ pounds of stuff in the back of the truck. Much improved ride and handling. Cheap money well spent.



by:
Toyota Tacoma

The massive ride feel improvement, I have a topper and drawers in the rear of my Tacoma. With the SumoSprings and medium-duty Old Man Emu leaf springs, the truck does not feel any hint of bucking or kicking anymore.



by:
2004 Toyota Tundra

Absolutely love these! Had them on my 2004 Toyota Tundra for a year now and have been extremely impressed of how the truck handles with and without heavy loads. Worth every penny.

Gene

11/7/2022

They are working out great still after well over a year now. Love how I can carry heavy to extremely heavy loads without the truck sagging down and still rides like a Cadillac



by:
2012 Toyota Tundra

Great product and arrived early. Did have to enlarge the holes on my stock base plates to accommodate the slightly larger u-bolts. Included instructions made the install very easy.



by:
2008 Nissan Frontier

Excellent product and excellent company to buy from!

Easy install and solved my “sagging” problem.



by:
2013 Toyota Tacoma

We installed these on our 2013 Toyota Tacoma in order to haul an in-bed camper across country and back. These SumoSprings were the perfect solution along with some new beefy AT tires to help support the weight of the camper and keep us moving with the right support and suspension we needed for the trip!



by:
Chevrolet Silverado 1500

While towing my 28' Lance trailer with my chevy 1500. These Sumosprings helped stop the porposing that only happened sometimes over our lousy California highways.



by:
2015 Toyota Tundra

Great product ! Does all it claims and more than i expected. I leave my 5th wheel hitch mounted yr. round and haul bins of sand when I plow in the winter, so it's helping all the time. I can see and feel a difference in hauling our 30 ftr. Doesn't change the ride at all like just about anything else you'd need to do to get the help these give you. Easy install too!

Randy M.

3/12/2018

Still goin strong. I’ve had numerous campers even a Tundra owner inquire about what I’ve done to level my truck for the load. It totally out does more springs! When and if they fatigue, I’ll buy em again.



by:
2015 Toyota Tacoma

Great addition to my Tacoma! My camper pulled fine with a minor amount of sag before and now it's perfectly level!!



by:

First, a thank you to Jameson C for recommending this product. Installation was straight forward. New u-bolts would not be a bad idea if the old ones are rusty. The empty ride is still pretty good too. I haven't towed with them yet but I think they will be great.


25
2096
Show More Reviews

See what our Experts say about this SuperSprings Intl Vehicle Suspension

  • Which Jounce-Style Suspension Enhancement System Should I Install On My 2015 Toyota Tundra?
    Since you are already thinking you may meet or exceed the 1,000lb weight capacity of the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-610-40 then I recommend just going with the 1,500lb SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-610-47 to be on the safe side. That way if you decide to add some cargo to the travel trailer or have an unusual load in the bed of your truck you will not have to worry about maxing out the jounce springs which could damage them. These...
    view full answer...
  • SumoSpring Helper Spring Recommendation for 2014 Toyota Tundra Hauling a Travel Trailer
    Since you're primarily needing the SumoSprings product to support the tongue weight of your trailer when towing, I'd recommend the lower capacity # SSR-610-40. The 1000 lbs of additional support will be perfect to handle the 850 lb tongue weight of your trailer, but they won't be so stiff that they'll make the truck ride like a buckboard when you're not towing. I've linked to an installation video that you might find helpful. The video shows an install on a Tacoma, but the procedure would...
    view full answer...
  • Differences Between SumoSprings Kits For 2020 Toyota Tundra
    The difference between SumoSprings Solo Custom Helper Springs part # SSR-610-54 and part # SSR-610-40 is the weight capacity. The SSR-610-54 has a 2,800 lb capacity and the SSR-610-40 has a 1,000 lb capacity so it depends on what you plan on carrying in the bed how much capacity is needed. Both systems replace the factory bump stops and will cushion the ride while supporting the load. The springs are made of micro-cellular progressive material so they compress under heavier loads and...
    view full answer...
  • Recommended SumoSprings For Rear Axle Of A 2017 Toyota Tacoma SR5 4x4
    The SumoSprings Solo Custom Helper Springs - Rear Axle, # SSR-610-40, are great jounce springs with a capacity of 1000 lbs at 50% compression. The # SSR-610-47 that you are referring to is a heavier-duty application with a 1500 lb capacity at 50% compression, and I recommend these if you will be doing a lot of hauling since they have a much stronger capacity, but for occasional hauling the 1000 lbs springs are more ideal and won't give as bumpy a ride when unloaded. These springs are...
    view full answer...
  • Choosing Blue or Black SumoSprings for 2002 Toyota Tundra Towing 22' Camping Trailer
    For your 2002 Toyota Tundra I would definitely choose the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-610-40. The 1,000 lb weight capacity is more than enough, especially since you are also using a weight distribution hitch. These will also have less of an impact on your unloaded ride when compared to the # SSR-610-47, but either way the impact will be minimal. SumoSprings are a great option for minimal impact on unloaded ride quality. They will be a great solution to absorb...
    view full answer...
  • Which SumoSprings for 2006 Toyota Tundra Towing 4400-lbs Trailer and Carrying 600-lbs ATV in Bed
    I think you're on the right track here, considering that you're not currently experiencing any adverse conditions when towing. Because of the tongue weight of the trailer and the additional weight of the ATV, I do recommend going with the Sumo Springs # SSR-610-47 over the # SSR-610-40 since they're going to provide you with the needed support when you've got the ATV in. Your tongue weight of 460-lbs is going to vary depending on how the trailer is loaded, so you could end up occasionally...
    view full answer...
  • Recommended SumoSpring For a 2014 Nissan Frontier
    This will depend on how much support is needed when you are towing. That being said, however, as you do not tow too much, I recommend going with the blue SumoSprings # SSR-610-40. This will still add up to 1,000 pounds of support, but will affect the ride less when not towing than a more heavy duty set up. The material used in these gets stiffer and more dense the higher the capacity goes, so a higher rated one will stiffen the ride when towing, but also when unloaded. The # SSR-610-40...
    view full answer...
  • Which SumoSpring Kit for 2017 Toyota Tundra
    I'd go with the lighter duty SumoSprings for your 2017 Toyota Tundra for the reason you mentioned. The heavier duty ones will be much harsher. I only recommend the higher duty ones for people who plan to be at the capacity of their vehicle most of the time when travelling. The part # SSR-610-40 would be the better option. You'll most likely have to use lower spring bar tension with your weight distribution system as well.
    view full answer...
  • Should SumoSprings Have Preload With Vehicle Unloaded
    According to the folks at SuperSprings, there should be a 1/2 to 1-1/2 inches of preload on an unloaded vehicle, so its likely that the suspension on your truck has worn to a small degree over the years. SuperSprings tells me that if the unloaded ride is more firm than you'd like, it's perfectly acceptable to trim a half inch or so from the springs. Doing so will not cause any harm to the springs and you'll get a less firm ride when the vehicle is unloaded. This won't affect the loaded...
    view full answer...
  • Are the Light Duty and Heavy Duty SumoSprings the Same Height for a 2015 Toyota Tundra
    Yes, I would say that is a fair assessment of SumoSprings # SSR-610-47. the capacity is higher as well at 1,500 pounds. And of course it also fits a 2015 Toyota Tundra. Both it and # SSR-610-40 even share the same instructions.
    view full answer...
  • SumoSprings Helper Spring Fit for 2012 Toyota Tundra
    Both SumoSprings Helper Springs # SSR-610-40 and # SSR-610-47 will work for your 2 wheel drive 2012 Toyota Tundra. These helper springs are also a fit for the 4 wheel drive model. The # SSR-610-40 SumoSprings are intended for light duty use, while the # SSR-640-47 springs are for heavy duty use.
    view full answer...
  • SumoSprings Helper Springs For 2002 Toyota Tundra
    If you are still experiencing sag after installing the helper leaf springs, I recommend to use the heavy duty SumoSprings Solo Custom Helper Springs part # SSR-610-47 1,500 lb capacity to help eliminate the sag. The great thing about the Sumo Springs is their porous construction allows for progressive load control which means the intensity of their compression matches the weight of the load. When your not towing they won't be stiff compared to other jounce style springs which are dense...
    view full answer...
  • SumoSpring Recommendation for 2006 Nissan Titan Using Weight Distribution
    I prefer going with the lighter duty springs like part # SSR-610-40 as the lighter duty the SumoSpring is the better the unloaded ride quality would be. Especially considering that fact you have a weight distribution system. Which after installing these you'll have to readjust the spring bar tension of the WD system.
    view full answer...
  • SumoSprings Recommendation for a 2015 Toyota Tundra Towing 22 ft Camper with Dirt Bikes in Bed
    For your 2015 Toyota Tundra I would recommend the heavier duty SumoSprings part # SSR-610-47 since you will be towing and carrying such a high amount of weight. The lighter duty part # SSR-610-40 would still help, but not nearly as much as you would need the HD version would be the one to use. You would only notice either of these springs if you were to hit a pretty large bump when unloaded.
    view full answer...
  • Recommended SumoSprings Solo Custom Helper Springs for 2008 Toyota Tundra
    Yes, the SumoSprings Solo Custom Helper Springs part # SSR-610-54 are a confirmed fit for a 2008 Toyota Tundra (All Models). They feature a bolt-on install and do a great job of reducing sag/squat from towing and hauling. That said, for lighter load and infrequent use I recommend the lighter duty option since it will ride better unloaded, part # SSR-610-40.
    view full answer...
  • Suspension Enhancement Recommendation for a 2010 Toyota Tundra
    The # SSR-610-40 is the light duty SumoSpring available for your 2010 Toyota Tundra. These will have 1,000 lbs of support whereas the # SSR-610-47 would be considered the heavy duty version and would add 1,500 lbs of support. For you I would go with the heavy duty version. You should not that suspension enhancement does not allow you to carry loads heavier than what the current vehicle capacity is. It just provides more support to allow you to carry your capacity as safely as possible.
    view full answer...
  • Which SumoSprings for 2020 Toyota Tundra Towing Trailer with 850-lbs tongue weight
    I recommend using the SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-610-47 which are designed to help with a maximum of 1500-lbs of load leveling. I prefer this one to the 1000-lbs version # SSR-610-40 in case you may be carrying any additional cargo or you use your truck for carrying loads when not towing. The SumoSprings are a great choice because they're not going to adversely effect your ride quality because of their progressive load control.
    view full answer...
  • What is the Torque Spec of the Factory U-Bolts on a 2010 Toyota Tacoma
    In order to obtain the specifications as to how many foot pounds of torque needs to be applied to the factory u-bolts, you would need to obtain your VIN and contact the manufacturer. Another option you have would be to contact your local repair shop who has access to a program called, "ALLDATA". Unfortunately, these are the only options I have for you to determine the correct torque spec for the factory u-bolts on your 2010 Toyota Tacoma.
    view full answer...
  • Will the SumoSprings Rear Helper Springs Fit with a 2004 Toyota Tacoma
    I called SuperSprings to confirm whether or not the SumoSprings Rear Helper Springs, part # SSR-610-40, would work with your 2004 Toyota Tacoma. They have only tested back to 2005, and so they cannot say yes or no. Still, I've linked to a video installation on a 2007 Tacoma that you may be able to reference. The good news is we do have a return policy if they do not fit. I've linked to it below. In that event, contact our customer service department and they will help you from there.
    view full answer...
  • Recommended Suspension Enhancement for 2015 Nissan Frontier Towing 5,000 Pound Travel Trailer
    For your 2015 Nissan Frontier I would recommend the SumoSprings Solo Custom Helper Springs # SSR-610-40, which are the blue SumoSprings. Although SumoSprings are pretty good about not affecting your unloaded ride quality you're right, the others would be more stiff. The additional weight capacity wouldn't be necessary either. These helper springs will keep you level when towing while absorbing bumps and shocks. They have progressive load control and a microcellular urethane construction....
    view full answer...
    Image 1 for
  • Is There Any Advantage in Using SumoSprings With Weight Distribution on a 2016 Toyota Tacoma
    Even though the Super Springs SumoSprings # SSR-610-40 will help to keep your 2016 Toyota Tacoma level while towing like a weight distribution system, they are meant to keep your Tacoma from experiencing too much wear and tear while under a load. They can be used with or without a weight distribution setup, and will improve your rear suspension either way. A weight distribution system is geared towards making your whole towing setup more level and safe, where the SumoSprings are a little...
    view full answer...
  • Dimensions of Spring Included in SumoSprings Solo Custom Helper Spring Kit SSR-610-40
    The dimensions of just the jounce spring itself of the SumoSprings Solo Custom Helper Spring Kit # SSR-610-40 are 4 inches tall x 3 inches in diameter. These dimensions are without the included bracket and with the spring under no pressure. This kit is a confirmed fit on your 2017 Toyota Tacoma.
    view full answer...
  • How Much Clearance Between SumoSprings # SSR-610-40 and Frame on an Unloaded 2015 Toyota Tundra
    It's going to vary some from vehicle to vehicle just because of how your truck rides. However, I reached out to SuperSprings and they told me that a half inch to an inch of clearance between the spring and the frame is fairly standard. The SumoSprings Solo Custom Helper Springs # SSR-610-40 including the brackets are 6 inches tall. So if you need to determine exactly how much space will be between the spring and the frame of your Tundra you can always measure.
    view full answer...
  • Suspension Enhancement Recommendation for 2003 Toyota Tundra
    To help with the added weight on the back of your 2003 Toyota Tundra, I recommend a suspension enhancement system. The SumoSprings Solo Custom Help Springs Rear Suspension System # SSR-610-40 will work great for improving the handling and safety of your ride after adding the camper shell and dirt bike carriers. These are confirmed to fit your Tundra and will replace the axle bump stops on the frame. They work by providing additional support to your suspension when under load that will increase...
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Victoria B
Expert Research:
Victoria B
Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Michael B
Video by:
Michael B
Employee Thomas T
Video by:
Thomas T
Employee Jeff D
Installed by:
Jeff D
Employee Robert C
Installed by:
Robert C
Employee Jacob H
Installed by:
Jacob H
Employee Tricia G
Written by:
Tricia G
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Noah M
Updated by:
Noah M
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924