bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Dodge
  3. 2013
  4. Tekonsha
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118384
lowest price pledge
Retail:$66.95
Our Price: $39.74
You Save: 41%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 0.7 lbs
Quantity: 
In Stock
Tekonsha Custom Fit Vehicle Wiring - 118384
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Tekonsha custom fit vehicle wiring for your 2013 Dodge are available from etrailer.com. Installation instructions and reviews for your Dodge custom fit vehicle wiring. Expert service, and cheapest custom fit vehicle wiring price guarantee. etrailer.com carries a complete line of Tekonsha products. Order your T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part number 118384 online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (374)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118384

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • No Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle. This T-One typically plugs directly into the back of your factory-installed 7-way connector so you can retain the 7-way and also pull a trailer that has a 4-pole flat.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Retains functionality of factory-installed 7-way, RV-style connector (if present)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind rear bumper
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the rear bumper. If you have a factory-installed 7-way, blade-style connector, the T-One will plug in between the 7-way and the OEM socket.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118384 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118384 Installation instructions

California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118384

Average Customer Rating:  4.8 out of 5 stars   (374 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle. This T-One typically plugs directly into the back of your factory-installed 7-way connector so you can retain the 7-way and also pull a trailer that has a 4-pole flat.

by:

Slow start to a good impression but everything worked out.
1. It started with a delivery delay; I live two hours from the manufacturer but it took 3 weeks to get me my harness. When the error was found they over-nighted the harness to me.
2. The wiring in the harness was loose and would lose connection, disabling the lights. Pushing a connector back in to place, crimping it down and wrapping it in electrical tape solved that issue.
That was a month into owning the harness. It's been a year now and I've had no problems. I'm pleased with the compatibility and ease of which it took to install.




by:
2012 Toyota Tundra

I have a 2012 Toyota Tundra and I recently bought a pre-owned Leer camper shell. I used this harness to wire up the third brake light. I also used the brake light module. This setup worked perfectly and resulted in a neat and clean professional installation. Thanks etrailer, you had everything I needed for a successful prefect installation.




by:

Perrrrfect literally Less than 10 minutes for a complete install. Perfect fit




by:
2013 Toyota Tacoma

Does not fit vehicle as described on web age. Charge for shipping to return item. As the problem is their poor match up of product and vehicles the charge for returning items should be paid by them. Basically false advertising! DO NOT TRUSS etrailer. Go somewhere else.


Comments
Some vehicles have a factory connector that will not come apart for this product to plug into, so the connector ends have to be cut off and hardwired together. We mention this in the tech tips when going through the fitguide.
-- Etrailer Expert Sierra K - 05/11/2022


by:

Straight forward install. Works as inte nded.




by:
2013 GMC Sierra

Have been looking for a T-connector for my trailer lights for two years. Truck has a seven pin connector built-in. Wanted my GMC emblem to light up when the breaks are applied. Was getting ready to cut and splice wires when I looked on the internet and learned about etrailer.com. Found the T-connector I needed. Took 5 days to arrive after ordering, and 5 minutes to install. Works great !




by:

On my part I ordered the wrong wiring harness, was returned and replaced with the one I want with ease. Very happy with purchase




by:

Like this wiring harness so there’s no cutting no splicing everything stays OEM and it cuts installation time




by:
2009 Jeep Liberty

The hitch is very good, fit like a glove, BUT, the electrical connecter doesn't fit anything. The fine print on the directions says for a factory wired vehicle to add on a 4 pin connecter. My 09 Jeep Liberty was not factory wired so I'm out the money I paid for it. Thanks.


Comments
If you do not have a factory 7 way you will need this kit first: Item # 118554
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
$58.74
.
-- Etrailer Expert Sierra K - 10/06/2021


by:

TRAILER WIRING HARNESS WENT TOGETHER REAL GOOD. IT ONLY TOOK A VERY LITTLE TIME TO INSTALL. THIS MADE INSTALLING MY LED BRAKE LIGHT KIT VERY EASY.




by:

This does not fit my vehicle 2009 Toyota Tacoma. But your site said it did


Comments
This Tekonsha wiring harness does fit the 2009 Toyota Tacoma with a towing package. The plug that you plug the wiring harness into is located underneath the bumper on the drivers side of the Tacoma. If your Tacoma does not have a towing package, you will need part # 118496
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
$40.46
which is designed for a Tacoma without the towing package.
-- Etrailer Expert Heather A - 03/08/2022


by:

Worked as expected. 3,000 miles on the trailer and no problem.


Comments
The wiring harness fit perfectly and the installation was a breeze. I haven had any problems at all with this product and I reccomend it to anyone.
Casey H - 02/22/2022


by:

Doesn't fit 2012 Toyota Tacoma


Comments
You mentioned that it did not fit the Tacoma. I wanted to see if you could explain in more detail how that it didnt. Did your Tacoma come with the factory seven way?
-- Etrailer Expert Jenny N - 07/21/2022
Thanks for responding. I have a 2012 Toyota Tacoma 2 - door, 4wd. I dont see a factory 7 way. The box doesnt list a Toyota.
-- comment by: Lynn - 07/26/2022
The 118384 harness does fit a variety of vehicles, mostly trucks, that have seven ways already installed and it will not list every fit on the box.. It is meant to plug in line with the US Carr connectors in the seven way to provide the 4 way. If a four flat is all that you need then I recommend part # C55513 for your 2012 Toyota Tacoma instead. I will have our customer service team email you return instructions.
-- Etrailer Expert Jenny N - 07/26/2022


by:
2016 Jeep Grand Cherokee

Purchased this hitch for my new 2016 Jeep Grand Cherokee Laredo online after being quoted a $700 installation price at my local Chrysler Dealership. After doing some online searching and reading multiple reviews I decided to give these folks a try. My husband and I watched a very detailed video explaining 3 different hitch options for my Jeep and quickly decided for the price it was worth giving it a try. From opening box to install was less than 20 minutes that included connecting trailer light kit that I purchased extra $$.$$. You can barely see it under my JEEP. I'm very pleased and can't hardly wait to use it. Thanks again etrailer.com you helped me prove my to my husband that it would work and saved me $600!




by:

This item is awesome . Plugs right in with no cutting or splicing and looks and works excellent even after 1 year




by:

The box might fool you. If you wanted the harness for a jeep it is not listed on the box and the box photo shows a power converter. Actually in the box as pictured or it would be 5 stars. Making me double check the pn was compatible back on etrailer site. Installed as per website no issues there.




by:

Works just how we wanted it to! Pulled out camper great




by:
2018 Jeep Grand Cherokee

This harness is an adaptor and I ordered by mistake.
I need the complete harness and not an adaptor
Thanks


Comments
I will have our customer service team reach out to you. If your 2018 Jeep Grand Cherokee did not come with a factory 7 way then the harness that you would need is part # 118727
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
$75.54
.
-- Etrailer Expert Jenny N - 11/05/2021


by:
2014 Jeep Grand Cherokee

Bought a trailer hitch, and wiring harness for my 2014 Jeep Grand Cherokee. etrailer was fantastic, right on the money with the videos and it was very helpful in choosing the right hitch. Very easy to install.




by:
2016 Jeep Grand Cherokee

I purchased a trailer hitch (C13182) and wiring adaptor (T-One 118384) for my 2016 Grand Cherokee. Received it within a few days and fit was perfect! Only took all of ten minutes to install with the help of my 5 year old. Thank You!




by:

Search hi and low to find what I needed or even for someone who even understood what I needed. I had no luck until I search on etrailer.com. They had exactly what I was looking for. Ordering was simple and delivery was quick. They even check in with me before durning and after shipping. I love this site. I'll definitely shop here first next time.




by:
2012 Jeep Grand Cherokee

Perfect fit on my 2012 Jeep Grand Cherokee. Hitch and wiring harness installed in 20 minutes. This is my fifth hitch and wiring harness purchased thru etrailer and have yet to be dissapointed. Both the video and written instructions were spot on, the installation of the wiring harness couldn't be easier!


Comments
Just did this install on a 2011 Jeep Grand Cherokee everything is just like the video. But the only thing that worked was tail lights. No turn or brake lights. I could not find any fuse or relays bad or missing. Did I miss something?
-- comment by: Glenn H - 09/21/2012



by:
2016 Jeep Grand Cherokee

Simple product, plug and play.




by:

Awesome products and very reasonable pr ices!




by:

Easy to use web site - got the correct part - I have already ordered more parts - this time for my trailer!!! I will always choose etrailer for my parts



25
375
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring



  • No Tail Light Function on 16 ft Car Hauler Towed by a 2004 GMC Sierra 2500
    Based on your description, it sounds like your truck has a 7-way trailer connector. Anytime your trailer lights are not functioning properly, it is best to isolate the issue to either the truck or trailer. It sounds like you have already started some of the troubleshooting, but I will list the steps from the beginning just in case. The first and easiest step to take is to check the vehicle side and trailer side connectors for any corrosion. You said your wiring looks new, so this may...
    view full answer...
  • No Power on Tail or Brake Light Pin of Part # 118384
    If you are using the # 118384, and are not getting any signal on the connector for the brake or the tail light, you most likely have blown or missing tow package fuses. These fuses are typically located in a fuse box under the hood, but their location can vary according to the year, make and model of your truck. Your owners manual should have a fuse diagram showing which fuses protect which circuits, as well as the location of the fuses.
    view full answer...
  • Troubleshooting 2011 Dodge Ram No Running Lights on Trailer, Brakes and Turn Signals OK
    Under the hood of your 2011 Dodge Ram there should be a 20 amp fuse for the trailer running lights. It is a fairly common problem with your generation of truck that fuse ends up blowing. There should be a legend on the fuse box somewhere that details where all the different fuses are. Use that to find the correct fuse and replace it.
    view full answer...
  • Grounding Problem on RV Towed by 2004 GMC Sierra
    The fact that everything pretty much works fine until the headlights are switched on tells the story. What you are experiencing is the classic symptoms of an insufficient ground connection. When the headlights are switched on, the wiring system of the trailer is drawing full amperage, which is when a problem will manifest itself. Make sure that the ground connection on the RV is securely connected to clean metal on the trailer frame. You can find this connection by tracing the white...
    view full answer...
  • No Power on the Running Light Circuit on a 2000 Chevy Silverado z71 Towing a Boat Trailer
    There is a possibility of a relay or fuse related to tow package wiring either in the power distribution box or in the in-cab fuse panel that you can check. Look in the vehicle owners manual for all fuse and relay locations and check those. If the running light circuit shows no power on the 7-Way on the truck then that does eliminate the problem as being with the trailer. On the chance that it may be related to the trailer, it would most likely be a ground issue. You can check all the...
    view full answer...
  • Locating and Repairing Ground Problem in Wiring of Boat Trailer
    It sounds like you are on the right track with the ground problem. Check your trailer connector on the Grand Cherokee, and make sure the white wire is grounded to the frame of the vehicle. Even though your trailer works fine when connected to your truck, you still might have a weak ground on the trailer. It is not unheard of that a given trailer will work fine with one vehicle, but not with another. Check the grounding point where the white wire from the connector attaches to the trailer...
    view full answer...
  • Installing Pilot Automotive LED Fire Strip # 36049 on 2002 Chevy Silverado
    What you are describing is almost certainly a ground problem. If you are hardwiring the Pilot Fire Strip into place, you will need to make sure that BOTH ground wires are attached to clean bare metal on the truck frame or chassis (see photo). Leaving the 4-pole connector on the Fire Strip and installing a 4-pole connector on your truck like part # 118384 would would be your best bet, as there would be no cutting or splicing required.
    view full answer...
    Image 1 for
  • Installation Instructions for the Tow Ready 4-Pole Harness for a 2010 Toyota Tacoma
    Under the rear bumper, near the driver side of your 2010 Toyota Tacoma there will be a plug with a cap on it that you will remove and plug the 4-Pole Trailer Adapter # 118384 into. I attached installation instructions and video for this product for you to check out that shows you how to install it.
    view full answer...
  • Trailer Wiring Harness Recommendations for a 2012 Jeep Liberty without a Tow Package
    Part # 118384 is designed for Jeep Liberties with a factory tow package. Without the factory tow package, not all functions will work. In order to make it function, you will need to head to your dealer and have them re-flash either the Body Control Module BCM or Power Control Module PCM to fully activate that port. Either way you would not need a relay.
    view full answer...
  • Is a Tail Light Converter Needed When Using a # 118384 with a Trailer With Combined Tail Lights
    The 4-Pole Trailer Adapter # 118384 that you referenced will not require a converter to be used with your trailer that has combined tail lights. The 4-way will have the correct voltage on the 4 circuits to be used with your trailer. GM will have already converted the signal from the separate signals like what are on your 2006 Chevy Silverado tail lights to a combined tail light circuit.
    view full answer...
  • 4-Pole Trailer Adapter for GM trucks with Factory 7 Way for a 2007 Chevrolet Silverado
    You are exactly correct, the 4-Pole Trailer Adapter for GM trucks with Factory 7 Way, part number 11838, will provide you with a 4 way connector. The 7 way will still function as well. The adapter would install inline between the two sockets, just as you describe.
    view full answer...
  • Boat Trailer Pulled by 2001 Chevy 1500 Has Lights That Will Not Work When Brakes are Applied
    I would suspect a poor ground connection on the trailer. Most trailers use a ground connection at the front of the trailer, with each lamp picking up its ground connection by its physical contact with the trailer frame, in effect, using the trailer itself as part of the ground circuit. Take a look at the grounding point for the trailer connector, it can usually be found on the trailer tongue near the coupler. Make sure that this ground connection is tight, and connected to clean metal....
    view full answer...
  • From End to End How Long is the Wire of the 4-Pole Trailer Adapter GM trucks 7 Way, part # 118384
    I went out into our warehouse and measured one of the 4-Pole Trailer Adapter for GM trucks with Factory 7 Way, part # 118384, that we had in stock and it measured 41 inches from the end of one connector to the end of the connector on the opposite side.
    view full answer...
  • Can 4-Pole Trailer Adapter, # 118384 Be Used at the Same Time as Another Connector, 2010 Dodge Ram
    The 4-Pole Trailer Adapter, # 118384, is a T-style connector. When plugged into a truck that has an existing factory trailer connector, that factory trailer connector will remain functional and you will be able to use either one. However, I advise against using more than one of the connectors at the same time. Doing so can overload the circuits and cause electrical damage. I have included a link to the installation details for this harness for you to view. The harness itself is rated...
    view full answer...
  • Troubleshooting Trailer Lighting That Stops When Headlights of Vehicle are Turned on
    What you described is the classic insufficient ground scenario so finding a way to improve the grounds will fix the problem. Try improving the connection of the main ground wire of the trailer wiring harness. Make sure it is attached to a clean metal surface. Or you can run all of the trailer wires back to the main ground. This is actually the ideal solution. But you can also check the current grounds for the lights to make sure they are making a solid connection to a clean metal surface.
    view full answer...
  • Does T-One Vehicle Wiring Harness 118384 have Combined Brake Light and Turn Signal Functions
    Tow package wiring on a vehicle is already converted to combine the brake and turn signal lights onto the same circuit which is what trailers use. Wiring harness # 118384 Tees in line with the factory 7-Way wiring and provides a 4-Way flat connector in addition to the factory 7-Way so when using it the brake and turn signal lights will also be on the same circuits.
    view full answer...
  • Will Tow Ready T-One Connector with 4-Pole Connector Fit 2008 Chevrolet Silverado
    The Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118384 is confirmed as a fit for the 2008 Chevrolet Silverado. This 4-Way trailer connector will plug into your Silverado's wiring behind the factory 7-Way connector at the rear of the vehicle. I've attached an installation video of this connector on a similar vehicle for you. I've also attached links to the wiring fitguide and the fitguide product categories for your 2008 Chevrolet Silverado for you.
    view full answer...
  • No Power on 12-Volt Accessory Pin on 7-Way of 2005 Chevy Silverado
    How to proceed will depend on what you meant by not getting any power to my trailer. If the 12-volt accessory power pin that's in the 1:00 position on your 7-way isn't active, you'll want to check the fuse in the power distribution box on the inside drivers side fender in the engine compartment. Remove the cover, and locate the two studs on the inboard side of the fuse block. The stud closest to the front of the truck should have a wire with a ring terminal fixed to it. If not, you'll...
    view full answer...
    Image 1 for
  • Recommendation to Give 7-Way an Additional Active 4-Way Trailer Connector
    I wish we had an adapter for your 7-way that would give you both a functional 7-way and 4-way that could easily be transferred to a different vehicle, but the only solution have is the # 118384 which would plug inline with your 7-way to allow you an additional 4-way that would be active. This could fairly easily be transferred from one vehicle to the next as it basically just plugs inline.
    view full answer...
  • How to Add a 4-Way to a Vehicle with a 7-Way Easily
    What you would want is the part # 118384. This harness installs in line with the 7-way at the rear of your Toyota Tacoma and gives you an additional 4-way to match what is on your trailer without the use of an adapter.
    view full answer...
  • Installed 7-Way and 2012 Jeep Grand Cherokee Dealer Reprogrammed But No Brake Lights/Turn Signals
    If your 2012 Jeep Grand Cherokee did not come with a factory installed 7-Way then if you plug one into the wiring at the back of the Jeep the 7-Way would not function. Like you already did, you would go to the dealer and have them reprogram the computer to get the newly installed 7-Way to function. If everything was installed properly then it should work. If not then they may have made a mistake in the reprogramming process. Or, it could be that there is a fuses or fuses or even relays...
    view full answer...
  • Drivers Side Brake and Turn Signal Lights Not Working on a 2012 Ram 3500 4x4 Cummins Diesel
    When a light is only working periodically that is usually an indication of a weak ground connection or a loose wire. But on a newer truck like your 2012 Ram 3500 this does not seem likely. The trailer connector having power is not surprising. That means that the trailer wiring is independent of the truck lights. I would start at the front and work my way back. You could have something going on with the fuse and/or relay (if equipped) on that side. Use the truck owners manual to find all...
    view full answer...
  • Keep Blowing 20 Amp Running Light Fuse when Connecting Trailer to 2012 Ram 5500
    There is a short circuit somewhere that is causing the fuse to blow. A short would cause excessive power draw. Since it only happens when you plug in a trailer it is likely that the short is in the trailer connector or the wiring to it. You will need to make sure that there is no corrosion build up on the pins of the connector but also on the inside of the connector where the wires attach. Also check for any frayed or pinched wires touching metal and fix as needed.
    view full answer...
  • Troubleshooting Trailer Lights that Shut off When Vehicle Brakes are Applied
    Typically when trailer lights all cut out when a certain function is applied like the vehicle brakes the problem is either a bad ground for the trailer light assemblies or you are overdrawing the trailer light circuit. Most likely its the ground. First place to start would be to inspect the trailer wiring connector on your 2007 Chevy Silverado. Look for corrosion on the pins. Clean as necessary. Most trailer lights ground through the mounting assemblies. Since your trailer is brand new...
    view full answer...


< Previous
123. . .14



Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Rachael H
Expert Research:
Rachael H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Ryan G
Installed by:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.