bing tracking image
  1. Watersport Carriers
  2. Yakima
  3. Paddle Board
  4. Roof Mount Carrier
  5. Aero Bars
  6. Elliptical Bars
  7. Factory Bars
  8. Round Bars
  9. Square Bars
Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards
Yakima

Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards

Part Number: Y04075
In Stock
$348.95
Watersport Carriers
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars. Great Prices for the best watersport carriers from Yakima. Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards part number Y04075 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (29)
  • Q & A (0)
  • Photos
  • Used (1)

Yakima Watersport Carriers - Y04075

  • Paddle Board
  • Roof Mount Carrier
  • Aero Bars
  • Elliptical Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Saddle-Style
  • Yakima
  • Clamp On
  • No Load Assist
  • Rear Loading

This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.


Features:

  • Roof-mounted carrier holds up to 2 stand-up paddleboards (SUPs) fin side up on your roof rack crossbars
  • Integrated stainless steel straps secure your boards to the carrier
    • Straps adjust along built-in tracks to accommodate boards up to 36" wide
    • Slots on bottom of carrier contain strap ends to eliminate flapping
    • Pads on straps protect board rails and provide extra grip
  • Integrated rollers let you easily load an oversized board
  • Tie-down straps and stainless steel hook secure tail of board to your vehicle
    • Secure bottom board if 2 boards are mounted
  • UV-resistant, synthetic rubber strips on arms protect your board from scratches
  • Simple, clamp-on installation on most crossbars - no tools required
    • Adapters included to keep carrier from sliding on round bars
  • Same Key System (SKS) locks secure boards to the carrier and the carrier to your vehicle
  • Lightweight extruded aluminum with glossy black powder coat finish resists corrosion


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
    • Maximum crossbar dimensions: 3-1/2" x 1-11/16"
    • Minimum crossbar spread: 24"
  • Carrying capacity: 2 boards
  • Weight capacity: 66 lbs
  • Maximum stand-up paddleboard width: 36"
  • Integrated strap length: 62-1/2"
  • Carrier width: 40-1/8"
  • Tie-down length: 11' 10"
  • Limited lifetime warranty


Yakima SUP Dawg Crossbars

The SUPDawg lets you carry 1 or 2 SUPs fin side up on your vehicle's roof rack. This padded aluminum carrier includes integrated, adjustable straps, rollers for easy board loading, and a tail tie-down to secure your boards. The SUPDawg mounts to most crossbars without tools, and it includes locks to secure your boards to the carrier and the carrier to your vehicle.


Built-In Straps and Tie-Down Anchor

The carrier has integrated straps that adjust along built-in tracks to snugly secure your boards. The straps can be tightened or loosened by pressing the red buttons on the end of each arm.


Elastomer pads on the straps help grip your boards, and they protect your board rails against strap abrasions. The polypropylene straps and UV-resistant pads will last through many years. And built-in slots in the carrier contain excess strap length to prevent flapping as you drive.


Yakima SUP Dawg Tie Down

The included tie-down strap acts as an anchor - securing your SUP to your vehicle. The strap connects to a tie-down point on the tail of your board and hooks onto your bumper. If you are carrying 2 boards, secure the strap to the bottom board. A cam buckle lets you adjust the tension, so you can secure your board without damaging it. A flexible elastomer sleeve along the tie-down strap also protects your bumper from abrasions.


Easy Loading with Integrated Rollers

Yakima SUP Dawg Roller

Rollers are built into the ends of the carrier to help load large, heavy boards. Just set your board on the edge of the carrier, and push the board onto your roof.


Simple, Clamp-On Installation

Yakima SUP Dawg Clamp

The SUPDawg's mounting clamps fit most crossbar configurations without the adapters. To install, simply place the carrier on your crossbars and turn the integrated handles until the mounting clamps are tightly secured. If you have round crossbars, the included adapters will provide a secure fit, preventing the cradles from twisting or sliding on the bars.


Added Security

Yakima SUP Dawg SKS Lock

Locks on the ends of the carrier secure your board to the carrier and the carrier to your roof rack. After your board is loaded and the straps are pulled through to the back of the carrier, use the locks to secure it in place. Yakima's SKS cores can be swapped out to make all your Yakima locks keyed alike.



8004075 Yakima Sup Dog Roof-Mounted Stand Up Paddle Board Carrier

Installation Details Y04075 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards - Y04075

Average Customer Rating:  4.9 out of 5 stars   (29 Customer Reviews)

This padded carrier lets you transport 2 SUPs on your roof rack. Built-in steel straps adjust on internal tracks for boards up to 36" wide, and rollers help load heavy boards. Locks secure boards and carrier. Clamp-on mounting on most crossbars.

by:

I use these 2-3 time weekly for my SUP I fish off my SUP and this rack is a great investment for quickness and ease of strapping. Thing I like best about etrailer is how fast I get my stuff.



by:

After doing some research decided to go with the Yakima roof rack setup for our VW Atlas. Love the look and functionality of it all. Got the SUPDawg paddle board carrier to go with it. Love the locking capability for piece of mind when leaving boards unattended. We are VERY happy with our choice. Drove on highway with two paddle boards and it all went smoothly with zero wind noise whatsoever. Definitely worth every penny. Will recommend.



by:

Received the the Thule accessories and Yakima Supdog from etrailer.com. It was all nicely packed into one box. As the box said, "the bottom of this box should not be the end of the relationship"
I can tell you it won't be! The items were shipped quickly, and they followed up with an email to make sure all was received well. Love the customer service! Also, the Yakima Supdog product is great. Took no time at all to get it on my truck and load up the 2 paddleboards.
It was exactly what I was looking to get!
Thanks!



by:

The SUPDwag is easy to install and use. Made for Stand Up Paddle boards, but it can work with Surfboards. Wish it was a little bit narrower, hopefully Yakima will make smaller one for the surfing market.

I turned my unit around to the driver's side for loading, also protects rain from getting in the lock when driving.



by:

Great Product, mounts very well and sturdy to my stock VW carrier bars. Easy to install and easy to use. I would give this 5 stars if the length of the straps had been in the description. If the straps were 75" instead of 65" this would allow for more carry options. If you have 2 sups over 6" thick and 33" wide, I would search for another option. Many hybrid SUPs like ours are over 6" thick and very wide and unfortunately this carrier cannot accommodate 2 of our hybrids due to strap length.



by:

Put these on a Subaru Forrester. Very easy. Love the excess cord storage. Snugged down my paddleboard so well I didn't need the front tie down.

Dawn G.

9/5/2017

Love it.



by:

When purchased I was concerned that the clamp down to my cross bars wouldn't work. Upon delivery I installed the SUBDawg immediately with no problems what so ever, the universal type clamp worked well. My wife and I put both paddle boards on after the install and went for a ride up to 70 mph, we felt no movement. The engineering of the tie down is awesome. I highly recommend buying the Yakima SUBDawg.



by:

Fantastic service! Speedy delivery and The sales team follows up with you to make sure you have all the information you need to use what you ordered. Fantastic company. Would highly recommend and I will use them again in the future



by:

Competitive price. Works as expected for a year now, no problems and very easy to use. I was surprised etrailer had these in stock while everyone else was out or drastically up charging.



by:

Great product! Customer service is A+ I will definitely buying from etrailer again. Thank you



by:

Great product. It works very well with two paddle boards. We can’t wait to use it as much as possible this summer up at Lake Tahoe.



by:

I love etrailer they also have great people help you out when you have questions.



by:

Mark

5/19/2022

Still works great after a year, easy to load and durable.



by:

Fast shipping. Good price. Nice product. Easy fit and install



by:

holds board firmly in place.



by:

Great product. Easy to install.



by:

Great communication!



by:



by:

Delivered as promised.



by:



by:



by:



by:



by:



by:


25
29
Show More Reviews

See what our Experts say about this Yakima Watersport Carriers

  • Recommended SUP Carrier To Go On A TruXedo Elevate Rack System TX24NV
    'Sup Kevin (see what I did there?). I do have a solution for you, but the Thule SUP Taxi # TH810001 and the Yakima SUPDawg # Y04075 are not going to work with the TruXedo Elevate Rack System # TX24NV. The TruXedo system has crossbars that are 3.79" wide 1.5" tall. The SUP Taxi and SUPDawg will only work with upto crossbars 3.5" wide. So, the TruXedo bars will be a hair too wide. We do have some good SUP carriers that will work on the TruXedo crossbars. One really good option is the Lockrack...
    view full answer...
  • Roof Rack Recommendation for Carrying SUPs on a 2022 Toyota 4Runner
    I recommend using the Yakima JetStream setup to carry your paddleboards on your 2022 Toyota 4Runner because the Yakima legs have adjustments in them that allow you to get the best fit possible. 60" JetStream Crossbars - Black # Y00426 TimberLine Towers - # Y33TR Lock Cores - # Y07204 (optional) Then if you don't already have a paddleboard carry I recommend going with the Yakima SUPDawg # Y04075 which can carry both of your boards. If you wanted to have matching locks for the roof rack...
    view full answer...
  • Paddleboard Carrier Recommendation for Carrying Two 36 inch Wide Paddleboards
    The Yakima SUPDawg carrier part # Y04075 that you referenced would do a great job carrying your two boards as it is designed to carry two boards that are up to 36 inches in width. I would need to know the year/make/model of your vehicle though to pick out a roof rack.
    view full answer...
  • Will 70 Inch Yakima JetStream Crossbar Allow SUPDawn & Sky Box 16 to Fit Together
    Hi CM, So in order to fit both the Yakima SkyBox 16 # Y95AV and Yakima SUPDawg # Y04075 next to each other on crossbars, you're going to need the 70 inch long Yakima JetStream Crossbars # Y00427. Even positioned at the outermost edges of the 60 inch long bars there won't be enough space, so you'll need the 70 inch bars and there is still going to be some overhang off the side due to the widths of the cargo box and carrier.
    view full answer...
  • Carrying 2 Stand Up Paddleboards with Darby Load Extender on a 2013 Chevy Silverado
    The Darby load extender and single roof rack bar # DTA944-968-924 can handle the 2 paddleboards but you will need a paddleboard carrier as well to safely secure and protect the boards. The Thule SUP Shuttle # TH811XT has a good price and holds 2 boards up to 34 inches wide. Only the SUPDawg, # Y04075, can handle wider boards and it maxes out at 36 inches. These carriers also include tie downs to secure the "bow" and "stern" of the boards. I have included video links to all of the parts above.
    view full answer...
    Image 1 for
  • Is Express Surf Strap Designed to Carry Two Paddleboards
    I spoke with my contact at Thule and she said that even though the Express Surf Strap would be long enough to secure two paddleboards stacked one on top of the other, it is not recommended because one board potentially could slide out from on top or beneath the other. We do have several carriers specifically designed to carry two paddleboards stacked. Check out the Yakima SUPDawg, # Y04075. This SUP carrier lets you transport up to 2 stand-up paddleboards on your vehicle's roof. I have...
    view full answer...
  • Will Yakima SupDawg fit on Yakima Overhaul Crossbars
    The Yakima SupDawg part # Y04075 that you referenced can fit the crossbars of the Yakima OverHaul part # Y01151 but it would do so by clamping around the bar. If you wanted carriers that install via the top channel of the bars I instead recommend the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445 or the Lockrack Watersport Carrier # LR54FR.
    view full answer...
  • Stand-Up Paddleboard Recommendation for a 2011 Jeep Liberty to Clear Roof Antenna
    If your 2011 Jeep Liberty has a trailer hitch with a 2 inch receiver, then you could use the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar, # RTL002, but you will likely have to carry your stand up paddleboard at an angle to clear your antenna. A better option for you would be the Yakima SUPDawg, part # Y04075, and the Thule WingBar Evod Roof Rack, which consists of the 53 Inch Thule WingBars, # TH711420 in black or # TH711400 in silver, along with the Evo Raised Rail Feet,...
    view full answer...
  • Recommended Stand Up Paddle Board or SUP Carrier for T-Slot Mounting
    The Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards # Y04075 is not able to be mounted to the top of rails with t-slots. However, we do have an option that will fit your desires. I recommend the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445. This carrier will fit the T-slots of your crossbars, headache rack, or ladder rack. It comes with the locks included. I've attached a video to assist.
    view full answer...
  • Best SUP Carrier For Easy and Quick Loading
    It really depends on the carrier you go for. For the Thule Taxi XT # TH810001 I recommend putting a tie down in the front. Just because there is only one narrow strap securing your paddle board to the carrier and when you're driving at high speeds the paddle board will catch quite a bit of air which will raise the front of the board. I suggest the same thing for a Yakima Rack like the SUPDawg # Y04075. Same idea here, highway speeds will raise up the front end so again I recommend using...
    view full answer...
    Image 1 for
  • What Is Crossbar Distance Needed For Roof Rack Paddleboard Carriers
    There is no preferred crossbar spread listed for the paddleboard carriers we offer. They do however list the minimum crossbar spread at 24-inches. This is the minimum distance needed for part # TH811XT and # Y04075. Both carriers have weight capacities and crossbar dimensions, so you want to make sure you select the right carrier that will work for you. If you want to let me know what roof rack system you are using I will be glad to make recommendations that will work.
    view full answer...
  • Should Kayak Carrier be Used to Carry SUP Paddleboards
    Kayak carriers really aren't ideal for carrying paddleboards since they are designed for securing something taller or "thicker" I am sure there's a way you could secure one to a Jaylow part # Y04073 but that's not something we'd be able to give you definite instructions on and you'd be doing so at your own risk so we'd not recommend it. Your best options would be a carrier designed for paddleboards like the Yakima SUPDawg Carrier part # Y04075 which can carry both of your SUPs on the one...
    view full answer...
  • Rooftop Carriers for SUP and Skis
    Yakima's SUPDawg Stand-Up Paddleboard Carrier # Y04075 does resemble a rooftop ski carrier but it is designed specifically for use with SUPs which can be 4 to 5-inches thick, a good bit thicker than many skis are when stacked together. Ski carriers like the Rhino-Rack # RR576 can be used with skis or with snowboards (or even fishing poles) but they will not be able to fit a much thicker item like a SUP. What might work for you is a cost-effective combination of a ski carrier, such as the...
    view full answer...
  • What Roof Rack and SUP Carrier Do You Recommend for My 2022 Toyota 4Runner?
    The first thing you need on your 2022 Toyota 4Runner to transport 2 SUPs is a roof rack system with crossbars. For those components, I recommend the Malone AirFlow2 Crossbars # MPG216. The AirFlow2 comes with all the components you need to attach crossbars to your raised rails. As far as security, the AirFlow2 includes locking mechanisms that deter theft. In addition to the crossbars, you will need SUP carriers to attach. For a great-quality solution that will allow you to transport your...
    view full answer...
  • Paddleboard And Kayak Carrier Recommendations For 2010 Ford Escape
    The biggest concern with using both a paddleboard carrier and a kayak carrier on the roof of your 2010 Escape is the crossbar room that is required for the carriers. The SUPDawg Stand-Up Paddleboard Carrier, part # Y04075, measures 40-1/8 inches wide. Depending on the kayak, you may have a tough time trying to fit both on the crossbars. A carrier like the Yakima HandRoll, part # Y04082-2 has rollers that are placed on the rear crossbar and allow you to load your kayak by placing it...
    view full answer...
  • Replacement Bow and Stern Strap for Yakima SUPDawg Stand Up Paddleboard Carrier
    I checked with Yakima and the strap you need is # 8860050 for the Yakima SUPDawg Stand-Up Paddleboard Carrier # Y04075 that you have. This is the strap and hook that from from the front/rear of the vehicle to the boards you are carrying with the carrier.
    view full answer...
  • Canoe, Kayak, and Paddleboard Carrier Recommendation for Yakima Rack and Roll
    Paddleboards are too thin to carry vertically with a Yakima JawLow part # Y04073 and have them be secured as safely as they'd need to be. You really will need a rack for each item on your Rack and Roll # Y08107. The etrailer J-Style Carrier part # e98878 would be great for the kayak, then for the canoe the KeelOver part # Y04069, and finally for the paddleboard you'd want the SUPDawg part # Y04075.
    view full answer...
  • Can Paddle Board Carrier and Bike Rack Fit on 60 inch Yakima Bars 2019 Nissan Armada
    If you installed the 60 inch Yakima Jetstream roof rack part numbers # Y00426 and # Y33TR on your 2019 Nissan Armada you would have room for your current Yakima bike rack as well as a paddleboard carrier like the Yakima SUPDawg part # Y04075.
    view full answer...
  • How Many Carriers Does Yakima SUPDawg Stand Up Paddleboard Carrier Come With
    The Yakima SUPDawg Stand Up Paddleboard Carrier # Y04075 that you referenced includes two carriers for lack of a better term. Or one fixture for each crossbar. What you see in the product pictures is what comes with it.
    view full answer...
  • Inno Roof Rack and Thule Stand Up Paddleboard Carrier for a 2013 Mercedes-Benz M-Class
    The Inno Square Crossbars, part # INB127 and Inno Feet, part # INFR are compatible with Thule Stand Up Paddleboard (SUP) roof rack system like the Yakima SUPDawg, part # Y04075. On each roof rack acessory page, we list if the product is compatible with square bars, like the Inno crossbars you are looking at. I've included videos of this roof rack system being installed as well as the SUPDawg so you can see them in action.
    view full answer...
  • Recommended Carrier For Two Long Or Short Surf Boards
    Between the Inno Locker Watersport Carrier - Locking - Clamp On - 1 Boat or 2 Boards # INA446 and Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards # Y04075 I recommend the Inno # INA446. The reason for this is I find the ratcheting system on the Inno # INA445 to be superior to the cam buckle style strap used on the SUPDawg # Y04075. In addition the Inno # INA446 will fit two long boards, or 3 short boards, but also can be used to carry one kayak or one canoe allowing...
    view full answer...
  • Does the Yakima SUPDawg # Y04075 Come with Steel-Reinforced Straps?
    Yes! I confirmed with my contact at Yakima that the SUPDawg # Y04075 does include steel-reinforced straps like the Thule SUP Taxi XT # TH810001. It is important to note that in order to use both of these carriers, your vehicle needs to have a roof rack. In order to recommend you the best roof rack available for your vehicle that will work with these carriers, feel free to respond to this answer with the year/make/model of your vehicle.
    view full answer...
  • Recommended Roof Rack and Stand Up Paddleboard Carrier for 2018 Toyota Prius
    For your 2018 Toyota Prius, the Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR67TR is an excellent option with the Yakima SUPDawg # Y04075. The carrier width is 40-1/8 inches so it is slightly wider than the rear crossbar but 2 inches shorter than the front. This is the route I would go as it will have less wind noise.. It isn't an issue and will give you a sleek look, but if you want crossbars longer than the carrier, you can instead use the # RRVA126B-2, # RRRLKVA, and # DK467 to...
    view full answer...
  • Roof Rack and Stand Up Paddleboard Carrier for a 2008 Audi A4
    One of the better kits we have for SUP boards are the aero-style crossbars. These assist in carrying Stand Up Paddleboards by being aerodynamic themselves, and their wider bases providing more stability for the boards. I recommend the Thule AeroBlade Traverse kit, consisting of: Thule WingBars, 47 inches, Silver, part # TH711200 or Black, TH711220 Thule Rapid Traverse Foot Pack, part # TH480R Thule Fit Kit, part # THKIT1212 Thule is compatible with a wide range of accessories and also...
    view full answer...


< Previous
123. . .4



Do you have a question about this Watersport Carrier?


Used Items Available
Used Picture for Yakima SUPDawg Stand-Up Paddleboard Carrier w/ Tie-Downs - 2 Boards

Condition: Like New

Notes: May have damaged packaging or minor cosmetic blemishes.

$308.95
Add to Cart
Secure Checkout

Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Kathleen M
Updated by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Updated by:
Daron K
Employee Michael B
Updated by:
Michael B
Employee Manda E
Updated by:
Manda E
Employee Ashley K
Updated by:
Ashley K
Employee Lisa S
Written by:
Lisa S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.