bing tracking image
  1. Weight Distribution Hitch
  2. CURT
  3. 1100 lbs
  4. 1200 lbs
  5. 1300 lbs
  6. Fits 2 Inch Hitch
Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW

Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW

lowest price pledge
Retail:$418.40
Our Price: $297.59
You Save: $120.81
Weight Distribution Hitch
This item qualifies for Free Shipping
Shipping Weight: 84 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Product Expert Lindsey S

Is this right For you? Product Expert Lindsey S says:

Yes, if you:

  • Want an easy-to-maintain system
  • Have a trailer with 1,000 lbs – 1,400 lbs of tongue weight that doesn't experience much sway

No, if you:

  • Want sway control out of the box
  • Have a van or low-riding car that requires more ground clearance than you can get with round bars
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately. Lowest Prices for the best weight distribution hitch from CURT. Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW part number C17057 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (599)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Weight Distribution Hitch

  • 1100 lbs
  • 1200 lbs
  • 1300 lbs
  • Fits 2 Inch Hitch
  • WD Only
  • Includes Shank
  • CURT
  • Electric Brake Compatible
  • Surge Brake Compatible

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for improved stability and control
    • Creates a more level ride for both tow vehicle and trailer
  • Round spring bars are constructed of solid, forged steel for strength and durability
  • Adjustable spring bar tension - just switch links in lift chains to fine-tune
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Grease zerks in the head assembly make for simple maintenance
  • Powder coated steel resists corrosion
  • Snap-up lever eases hookup by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware
    • Hitch ball sold separately - requires 1-1/4" diameter shank


Specs:

  • Tongue weight: 1,000 lbs - 1,400 lbs
  • Maximum gross towing weight: 14,000 lbs
  • Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
  • Maximum rise: 7"
  • Maximum drop: 2-1/2"
  • 1-Year limited warranty


Included w/ SystemRequired - Sold SeparatelyOptional Add-Ons
  • Adjustable Shank
  • System Head
  • Lift Brackets
  • Spring Bars
  • Lift Bar
  • Hitch Pin and Clip
  • Hitch Ball w/ 1-1/4" Diameter Shank
  • Bar-Style Friction Sway Control

Weight Distribution Diagram

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.


Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.


Forged Steel Spring Bars

The round spring bars are made from forged steel, giving them a distinct advantage over typical cast steel bars. Forging is a process where thermal and mechanical energy are applied to the steel, resulting in a finished product that is more resilient to impacts and is stronger in terms of shear strength. Simply put, these spring bars do a superior job of helping to hold your trailer in line because of their added strength and durability.


Built-In Grease Zerks

Built-in grease zerk on the Curt weight distribution system head assembly

The system's head features 2 built-in grease zerks so that you can easily lubricate the spring bars without having to remove them from the head assembly. The grease zerks are located on each of the shafts that encase the spring bars. Simply use a grease gun (sold separately) to inject grease into each of the zerks.



17057 Curt MV Round Bar Weight Distribution Hitch

Alternate 17007

Item # C17057

Installation Details C17057 Installation instructions




Customer Reviews

Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW - C17057

Average Customer Rating:  4.7 out of 5 stars   (599 Customer Reviews)

This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.

by:

I received the beat up but we'll taped packed with all the parts included.

I bought a new travel trailer recently. This weight distribution hitch restored my tow vehicle front axle weight to it's original unhitched weight and also to it's unhitched front axle wheel well height measurement. I also was able to load 300lbs of cargo to the front of the travel trailer and only measured a 1/2 inch of increase to the front axle wheel well height.



by:

It works well. Your videos were a big help on initial installation. I also had to put a sway bar on my camper. If I were to do it over again I would have gotten the weight distribution system that includes the sway bar functionality. I discovered that system after I purchased the the weight distribution hitch. Overall the weight distribution system works very well. If you don’t need a sway bar, I highly recommend it.



by:

Instructions were easy to follow. However, it might be good to mention having a large 1-1/4 wrench for the ball nut. Had to use a pipe wrench. Great price! Fast delivery!



by:

It is easy to use and built well. One issue though when I originally set it up I tightened the saddle pieces to the torque recommended on the instructions. The threads started to strip. I fixed it with nuts and have used it since. I did call your company to make sure I did it right (the instructions were a little confusing on that part to me anyway). The lady I spoke to said I got it right and I did ask for a new part but decided to use it anyway with the intent to call back. This really was a little issue other then that for the price it was a great setup.


Comments
No problems with it. I have at least 10k miles towed with it.
Craig - 07/18/2021

by:

etrailer delivered a new weight distribution system ASAP at no charge, and I am Happy with product and etrailer. not UPS! Thanks again.



by:

I've waited to write his review until I could comment on both etrailer's service and the hitch's performance. First the service: I couldn't believe how quickly this 100 lb. box arrived--two days! Everything was intact and nothing was missing. The customer support of these folks is just incredible. Their prices were as low as I found anywhere, and with their quality service I bought everything I needed here.

Now the hitch. I bought the Curt C17057 WD hitch which has 1400# round bars, plus a pair of Husky friction sway bars for my 25 foot Airstream towed with a 2013 F-150 CrewCab. It's a really nice hitch/TT/TV combination. It controls sway really well, is virtually noise free and transfers weight appropriately, plus isn't nearly as heavy as the ProPride/Hensley hitches. I selected the Curt, in part, because it has grease zerks on the head, while some other candidates didn't. I couldn't be more satisfied!


Comments
One year later, the Curt weight distribution hitch is performing perfectly.It does a good job of transferring weight to the tow vehicle, is quiet and was relatively easy to dial in exactly for my vehicle trailer combination.I coupled it with two Husky anti-sway friction bars, although I have only installed one of them because that has proven enough for my 25 foot trailer. An Eaz-Lift Husky anti-sway bar combination was suggested for me by AndyThomson of CanAm RV, but I substituted the Curt because I liked the greasezerks on the Curt. The Curt is a really well-made unit. Id buy it again,as well as the Huskys, which Ive found to be quiet and effective.
Biplaner - 03/12/2017


by:

Staff was helpful in helping me select product and accessories I needed for my Installation. My trailer has a tool box where the load hangers needed to be. A different mount solved the problem. Both etrailer and load equalizer get 5 stars. I’m on their mailing list and they carry an extensive line of products, many that I was totally unaware of. This opens new possibilities for future purchases.

I use my truck to tow a 14,000 GVWR trailer and needed an equalizer hitch for towing heavy loads. I pulled the trailer heavily loaded for over 2000 miles while bucking 20 to 30 mph headwinds and crosswinds. It tracked like it was on rails and strong wind gusts were hardly noticeable.

etrailer also has great articles regarding towing and other products they carry.


Comments
Have used the hitch quite a bit in the past year with some pretty heavy loads. It has performed flawlessly and I couldn’t be happier. Would purchase this hitch again.
Richard M - 02/13/2019


by:

Excellent weight distribution hitch.



by:

I have ordered a fifth wheel and it arrived in three days just like I was told. It had all parts nothing missing and is made of good strong metal. Then a few weeks later I ordered a sway bar holder and I got it in good condition in time that I was told that it would be. etrailer is very good about getting your product to you on time



by:

Great to do business with



by:

Fast Service at a great price. Box arrived is great shape.
Heavy duty parts for sure, almost 90 lbs.
Did not install it yet, still building shelving in the new trailer so we have not got the final load in it to adjust the spring bars. Will get back when we get the trailer loaded.


Comments
It has been a Year since putting this hitch in service, all is working perfectly. It did take an hour to set it up properly the first time for the height of my truck. You have the height and the tilt to get the spring bars the proper tension. All is good. Great Product at a great price.
Frank R - 08/24/2016


by:

Best hitch I've ever owned! I previously bought and used extensively a Curt 5th wheel hitch which was perfect. Both have been great performers...I tow without hitch problems or worries.



by:

I missed the fact that this doesn't come with a hitch ball. It's obvious now looking at the listing with that in mind - and they aren't that hard to come by locally, but I'm lucky that I'm not too far from civilization right now!

So be sure to get a hitch ball, too!

Other than that, easy to assemble and works fine, just like the other one of these that I previously bought (that did come with a hitch ball...weird!)



by:

I was a little worried about setting up my first weight distribution hitch, but the instructions were clear and useful. I did have to give it a couple of tried to get the height right, but I worked out well. Would definitely recommend. And free shipping?!?!?! Sheesh, this thing is heavy. I'll definitely order from etrailer again,



by:

Since we bought a new travel trailer that weighs twice as much as our old one, it occurred to me that our old weight distribution hitch might be too light. I ordered this 14,000 lb rated hitch and it truly is stout. It arrived in a couple of days, securely packed with great instructions on its use. This hitch is similar in design to our old one, except that its much heavier steel and this hitch has a height adjustment for different height trucks/trailers. The price was awesome. I really couldn't be happier.



by:

This seems to be a nice hitch system. Appears well made. Doesn’t seem junky. It’s heavy enough to kill a guy (literally). I’m not really well rehearsed in different systems but this works quite well for what I use it for (10k equipment trailer). It went together easy (you will need massive wrenches/ratchet/sockets to snug everything up, 1 1/2”+) but handles my trailer well. I’d recommend it for the price.



by:

Smooth transaction. Fast shipping!



by:

Fair price works well my 13.5 k trailer doesn't sag at all might want to consider a stabilizer/ sway control I notice on a windy highway I get alittle drift my trailer is 39 feet long wich may be a factor too



by:

Purchased a weight distribution kit and it was shipped and delivered within a couple days. Customer Service was excellent and their products are of good quality. I really like their website as they carry a lot of useful products. I have and will continue to recommend etrailer.



by:

The Curt weight distribution system with round drop down spring bar worked to solve trailer frame clearance issue I had with old style sprig bar.



by:

I use this alot has I transport RVs work perfectly



by:

Hitch working with no issues. I have a 24 ft enclosed race trailer and I haul with a yukon. This hitch makes hauling easy and smooth.



by:

Its perfect to tow my trailer where I'm going



by:

it looks great . Cannot wait to use it



by:

Basic hitch that does what it is supposed to do. Well made and great powder coating.


Comments
Still working perfectly. Powder coating is still hanging tough.
Jason B - 08/09/2020
25
599
Show More Reviews

Ask the Experts about this CURT Weight Distribution Hitch



  • Spring Bar Length of Curt MV Weight Distribution System # C17057
    The spring bars of the Curt MV Weight Distribution System # C17057 that you referenced are 31.67 inches in length. The lift brackets on this system should be located a minimum of 33 inches from the center of the hitch ball.
    view full answer...
  • Will Curt Weight Distribution Hitch # C17057 Fit 2 inch Hitch of 2013 Ford F-150
    The Curt weight distribution system part # C17057 that you referenced is designed to fit a 2 inch trailer hitch like what you have at the rear of your 2013 Ford F-150 5-1/2 foot bed. That doesn't necessarily mean your vehicle is going to safely be able to tow a trailer with that much weight though. You'll need to check your owners manual or with a Ford dealer to find out what your towing capacities are.
    view full answer...
  • What is the Distance Between the Hitch Pin and the Ball Mount of the Curt MV # C17057?
    The distance between the center of the pinhole and the center of the ball mount of the Curt MV Weight Distribution System # C17057 is a minimum 11-1/2 and a maximum of 13 inches. This is because this part can move slightly due to the tilt range of the system. If you need a ball to go along with the MV, you will need a hitch ball that has a 1-1/4 inch diameter shank. I went ahead and attached our product page that has all of the balls we carry that have a diameter of that measurement.
    view full answer...
  • Backing Trailer When Using Curt C17057 Weight Distribution System
    The primary weight distribution scenario where you'll need to be very careful about backing the trailer is if you were using a friction sway control unit like part # 83660. Because jackknifing the trailer would damage the unit, it's recommended that a frictions sway control unit be disabled or better yet removed from the trailer while backing. Any W/D system can be damaged if you should jackknife, but the friction unit is the most susceptible. If you're not using a friction sway control...
    view full answer...
  • Chain Hanging Bracket Placement for Curt MV Weight Distribution System # C17057
    Curt does not specify bracket placement for MV Weight Distribution System # C17057. But we have found that the distance from the center of the hitch ball to the center of the frame hanger will be approximately 31 inches. I have linked a video review of this system for you. The system comes with every thing except for a ball. For a compatible 2-5/16 inch ball you can use # 19286.
    view full answer...
  • Confirmation of Proper Wheel Well Height for Older Pro Series Weight Distribution System
    According to the installation instructions for the Pro Series 49902, once the weight distribution system is installed and properly set up, the front wheel well or fender height should be equal or less than what it was before the trailer was hitched up and the weight distribution system spring bars were hooked up. Since your 'after' wheel well or fender height was 1/8 of an inch less than what it was before and you've only settled 3/4 of an inch at the rear fender, I'd say you've got it...
    view full answer...
    Image 1 for
  • Tongue Weight Capacity of Curt # C17057 Round Bar Weight Distribution System
    The spring bars used in weight distribution systems will work over a range of tongue weights. The Curt # C17057 round bar weight distribution system has a maximum capacity of 14,000 gross trailer weight/1400 lbs tongue weight. That's the maximum, but the system is effective on trailers with tongue weights ranging from 1000 to 1400 lbs. In order to choose the correct system, you'll need to find the fully loaded and ready to tow tongue weight of your trailer. You'll also need to include...
    view full answer...
  • Difference Between the Curt Weight Distribution Systems C17007 and C17057
    I checked with Curt and there isn't a difference between the Curt Weight Distribution systems part # C17007 and # C17057 that you referenced. Either part number will be for the same system. It's hard to say exactly what angle will cause problems for a WD when backing up, so the best recommendation I can make would be that if the trailer is being backed up mainly in a straight line you would be fine. But otherwise, I would recommend removing the spring bars.
    view full answer...
  • Does 2-1/2 inch Weight Distribution Shank C17128 Work with MV Curt WD # C17057
    Yes, the 2-1/2 inch weight distribution shank part # C17131 will work with the Curt MV weight distribution system part # C17057 which will allow you to not have to use a hitch reducer.
    view full answer...
  • Weight Capacity of Replacement Lift Bracket for Curt Weight Distribution Systems.
    The replacement lift bracket, part # C17008, isn't specifically rated for a weight capacity. It's a direct replacement for Curt weight distribution systems, like the MV # C17057 which is rated for 14,000 pounds so it'll handle over 12,000 pounds. As long as you have a Curt system that uses this type of bracket it'll handle the weight capacity. If you have a different system that this isn't designed for then I don't recommend using it. Let me know which system you have and I'll see if...
    view full answer...
  • What is the Length of the Spring Bars on Curt MV Weight Distribution System
    The length of the spring bars on the Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW # C17057 is 30-5/8 inches. These are the same bars, # C17074. We do not have this weight distribution system available without the shank.
    view full answer...
  • Frame Width Size for 14K Curt MV Weight Distribution System
    The Curt MV Weight Distribution System part # C17057 will only fit trailer frames up to 2-3/4" wide but you can still use this system if you swap out the clamp on brackets for bolt-on brackets, the Chain Hangers for Curt Weight Distribution Systems part # C17005.
    view full answer...
  • Can Curt Spring Bars Work With A EAZ-Lift Weight Distribution System?
    The Replacement Spring Bar for Curt MV Weight Distribution System # C17074 you referenced will not work with your EAZ-Lift 1,000-lb Weight Distribution System. Neither manufacturer will confirm if their parts are interchangeable with that of a competitor. The only solution I can offer is to replace the entire system with the Curt MV Weight Distribution System # C17057, which is compatible with the Replacement Spring Bar # C17074 mentioned above. This weight distribution system has a...
    view full answer...
  • How to Determine Tongue Weight Capacity for Vehicle to Determine Weight Distribution Recommednation
    What you will want to do is check out the label that is on the trailer hitch of your 2009 Chevy Suburban. It will have the tongue weight capacity of the hitch stated there when used with a weight distribution system and without it. Most likely there will be a second higher rating for if you do use a WD system. You should note that the weight of any cargo behind the rear axle needs to be considered as tongue weight as well. That being said, the part # C17057 would be a great option as...
    view full answer...
  • Inexpensive Weight Distribution System for a Trailer with Varying Weights and a 2003 Chevy Tahoe
    For your situation I recommend going with a weight distribution system that has a wide tongue weight capacity range. Reese system # 49570 has a tongue weight capacity range of 600 to 1,200 pounds. To adjust it for lighter or heavier loads you can change the number of chain links the spring bars hang from (the fewer the links the more tension on the bars) and the angle of the head. Or you could just take the bars off completely if the trailer tongue weight is below 600 pounds. This is an...
    view full answer...
  • What Gear Should 2017 Toyota 4Runner TRD be in When Towing
    Having your transmission in OD (overdrive) would be fine when towing a trailer with your 2017 Toyota 4Runner TRD. If you were in a super hilly area and you noticed the transmission shifting up and down a lot it would be a smart idea just to leave it in D (drive) so that it wouldn't be shifting as much. Most normal towing situations where you are under the capacity of the vehicle wouldn't require that though. From what I found online though it looks like your vehicle has a 5,000 lb capacity.
    view full answer...
  • Replacement Head and Compatibility for Blue Ox Weight Distribution Hitch
    I have a solution for you but there is not a replacement head offered for the Blue Ox model BXW1200. This is Blue Ox's least expensive weight distribution hitch and they do not offer replacement parts for it. The heads and spring bars on these systems are not interchangeable amongst manufacturers either. The Pro-Series Replacement Weight Distribution Bolt-Together Round Bar Head item # PS58442 may look similar but the Blue Ox spring bars will not fit in it. Since you are missing the...
    view full answer...
  • Distance from Hitch Ball to Chain Hanger Bracket When Installing Curt Weight Distribution
    The inside width of the frame channels of the Curt Hangers part # C17057 that you referenced are 3-3/16 inches. The distance from the center of the hitch ball to the center of the frame hanger will be 31 inches. If either of the two dimensions I listed would pose a problem for installing the # C17057 on your trailer you have the option of using the bolt on brackets part # C17005 which will bolt to the side of the trailer frame. This will get around the problem of a trailer frame being...
    view full answer...
  • Comparing the Curt MV # C17057 and # C17063 WD Systems
    The Curt MV # C17057 system and the Curt MV # C17063 system that you referenced are actually the same WD system. The only difference is that the part # C17063 comes with a 2-5/16" hitch ball and a friction sway control whereas the part # C17057 doesn't come with either option. I recommend going with part # C17063 because you will need a hitch ball anyways and the sway control will help to reduce sway that you would experience from wind and passing vehicles. Please note that the sway control...
    view full answer...
  • Curt WD Hitch Head Compatibility with Curt Spring Bars With Lesser Capacity for Different Trailer
    The Curt MV Weight Distribution System # C17057 uses the Replacement Head for Curt MV Weight Distribution Systems # C17075. That head is compatible with the Replacement Spring Bar for Curt MV Weight Distribution System - 800 lbs TW # C17072 you referenced, so you can simply change out the spring bars for your lighter trailer.
    view full answer...
  • What Shank to use With Curt Round Bar Weight Distribution System C17057
    It sounds like you need to get more drop with your Curt Weight Distribution System # C17057. If that is the case, either of the shanks you referenced would work for you. Shank # C17123 will offer your round bar system up to 8-1/4 inches of drop while shank # C17124 will give you up to 9-1/2 inches of drop. Each of these shanks are designed for use with Curt weight distribution systems and neither could honestly be termed better than the other. There is only really a difference in dimensions,...
    view full answer...
  • Shank Recommend for Curt Weight Distribution to Allow Trailer to Sit Level Towing V-Nose Trailer
    I can help you with both issues. What you need to allow your trailer to be towed level is a longer shank like the part # C17123 which allows for a drop of up to 8-1/4 inches which is much more than what comes with the # C17057. Then to fit the chain hangers around the V-nose of the trailer you'd want the # C17005. These can bolt underneath the V-nose on the trailer frame in the location needed so that you can hang the chains in the right location.
    view full answer...
  • Correct Weight Distribution System for 38' Bayridge Park
    If you're just looing for a basic cost effective weight distribution system I recommend the Curt MV Weight Distribution System part # C17057 which is rated up to 1,400 lbs so there will be plenty of room for error. The only thing you'll need to complete the setup is a hitch ball, 2-5/16" part # C40030.
    view full answer...
  • Recommended Short Arm Weight Distribution Hitch for Trailer with 1400-lbs of Tongue Weight
    I have a solution for you, but the Curt MV # C17057 that you've currently got won't accept the new components you're wanting to turn your system into a short arm weight distribution hitch. For this reason, you'll need to get a completely new weight distribution hitch. The shortest weight distribution system we have is the Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 15K GTW, 1.5K TW # C17422, which has 28" long arms and is similarly rated to your # C17057....
    view full answer...


< Previous



Do you have a question about this Weight Distribution Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality weight distribution hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate weight distribution hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Cole B
Installed by:
Cole B
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924