Curt TruTrack 2P Weight Distribution System w/ Sway Control - No Shank - 10K GTW, 1K TW

CURT Weight Distribution Hitch - C79JR

Built-in sway control keeps your trailer in line by using specific tension points and steel-on-steel resistance. System head tilt adjustment feature eliminates the need for washers. 2-5/16" Ball and adjustable shank sold separately.

Features:

• Evenly distributes weight over axles of tow vehicle and trailer for improved stability and control
  • Creates a more level ride for both tow vehicle and trailer
• Integrated 2-point sway control limits side-to-side movement of trailer
  • Brackets keep spring bars in place for a rigid system that holds your trailer in line
  • Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers
    • No lift chains - eliminates unwanted movement of spring bars
• Spring bars work with brackets to transfer tongue weight evenly to the tow vehicle
  • Constructed of forged steel
  • Secure in system head with easy-to-use snap pins
• No-drill, clamp-on brackets mount directly to your trailer frame
• Desired tilt is easily achieved using pivot point on system head - no more piling on washer after washer
• Black carbide powder coat finish is durable and corrosion resistant
• System includes head assembly, spring bars, sway control brackets, snap-up handle, pins and clips, and all necessary hardware

Specs:

• Tongue weight: 800 lbs - 1,000 lbs
• Maximum gross towing weight: 10,000 lbs
• Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
• Sway control bracket positioning: minimum of 4" in from end of spring bar
• Maximum trailer frame dimensions:
  • Height: 6"
  • Width: 4"
• Limited lifetime warranty

Included w/ System	Required - Sold Separately	Optional Add-Ons
System Head 2 Sway Control Brackets 2 Spring Bars Snap-up Handle Hitch Pin and Clip Necessary Installation Hardware	2-5/16" Hitch Ball (A-6) Adjustable Shank (C17100)	n/a

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.

Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.

To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.

17600 Curt True Track 2P Weight Distributing Hitch w/ Sway Control - No Shank - 10K

Installation Details