Place this sturdy chock in between the tires on your tandem axle trailer or use it as a stand for your tongue jack. Works with jacks that have 2" diameter inner tubes or jacks that have either a footplate or a caster.
Features:
Specs:
Note: Use this chock on flat surfaces only.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the FloTool Block and Chock. This is a wheel chock and a jack stand for tandem axle trailers. Part number FT11933MI. You notice here this wheel chock fits nicely in between the tandem axle set of wheels. This is going to eliminate that give back and forth, that rocking, when we've got our trailer parked. Of course it can be used as a standard wheel chock, just behind or in front of any single axle trailer wheel, and it also can be used as a jack stand.
As you can see here we've got a large square hole through the foot plate. The beveled side's going to hold a wheel in place. We also have the tube for a two inch diameter inside jack with no base. This is going to eliminate our jack from sinking into soft ground. Along the bottom there are serrated teeth. As you can see these are going to firmly grip into the ground.
The tread surface here is nice and wide. They're going to give our tires that added stability that we need. It's a polypropylene construction so it's going to be strong, it's going to be rugged. As you can see they've engineered it so it actually has a weight capacity of two thousand pounds which is very good. It's made right here in the United States.
Also, with that polypropylene it's not going to rust or corrode so we're not going to have to worry about it being out in the weather and deteriorating. Now that we've seen how it works as a wheel chock let's head up front and see how it works as a block for our jack. Here you'll see its other purpose. When you get out by a campsite it's wet, it's muddy, it always rains when we're camping of course, we can use this on the ground. It's really going to dissipate the energy of our jack out, and allow us to lift our tongue without sinking into the mud. Even with our great big camper here we've got no issues, no bending, no flexing, no problems at all with that lifting even with all that pressure being right there in that small area.
Great for use with dual axle trailers or single axle trailers with up to twenty inch wheels. That will complete today's look at the FloTool Block and Chock, a wheel chock and jack stand for tandem axle trailers, part number FT11933MI. .
Average Customer Rating: 4.6 out of 5 stars (66 Customer Reviews)
Place this sturdy chock in between the tires on your tandem axle trailer or use it as a stand for your tongue jack. Works with jacks that have 2" diameter inner tubes or jacks that have either a footplate or a caster.These work great on hard surfaces (I don't think these are intended for soft ground). I purchased 3 and the best part is they nest together to save space when not in use. They are light but quite rigid. e-trailer list these for up to 20 inch wheels but the label states 17 in max.
I have a new 40 thousand dollar trailer and wanted a jack stand for it. This jack stand I have not tried yet, but it is just what you advertised it would be. thank you.
Very poor construction. Used it as a jack stand for a two horse trailer and it has completely flattened out. Previous one we had before we sold our trailer was superior to this one. Got this one when we got another horse trailer. Very poor product quality.
WOW??Talk about getting your money’s worth. Not only does this product work well but it is extremely affordable. Thank you
Better than wood blocks that break every six months. Don't provide a food source for stinging and biting critters. They might live there but there's no wood to munch on.
I purchased this for my 26' Striper boat to replace a wooden block supporting the castor wheel jack stand. The item is a hollow plastic stand that appears to be made from an ABS type plastic, it does have a support column in the center for extra support of a jack stand. The description says it will support a 2000 lb trailer tongue weight. Only time will tell if the item will hold up, so far so good
Very low cost solution to an age old problem of having to lug around wooden blocks. I suggest buying 3 of them, two for each side of the tandem wheels, and one for the trailer jack. They are stackable, so they take up very little space in the trailer or transport vehicle when not being used. Very light weight, durable material, at a great price!
Wish this was a little bit bigger. Love the fact it is made in the USA. Nice product for the price, will be using it between the tires as a scotch on double axle trailers.
Good product. It’s used daily and works accordingly.
Fits perfectly between the wheels of my trailer. It's secured from rolling while parked. If needed one will support the tongue jack. I do recommend.
Nice to have to only carry one chock per trailer. Doubles as a trailer stand for disconnecting. Might not grip well on smooth concrete but if you make sure you wedge it into a tire vs. just placing it between them on this type of surface seems to work fine.
Great products!! Fast delivery, and worked great. Haven't taken photos yet, but the locking bar is working really well. The trailer is much better protected. The puck locks make it even more secure. Thanks for a great shopping experience.
Thank you for the great service, and the products I ordered was just what I was looking for. Thanks again I put the tire cover on the spare and it look s great!, and I plan on getting the rest on my camper...when I do I'll sends pictures... I'm one happy Customer, and when I need more accessories for my camper I will defiantly be ordering from etrailer.com and I will tell my friends where they too can order camper accessories from.
Great wheel chock, use it regularly. Light wight and durable. Fits good between the tandem wheels. The holes in it are great for screwing it the the wood deck behind a wheel inside the trailer when hauling my Trike.
The jack stand will be a great asset in that it's so light compared to a 6x6 block of wood. Not used right now, I'm sure it will be very functional.
Works well as intended, one note is to lay chock parallel to your Tralee and not horizontal to the trailer, it will fold a little bit if trailer rolls a bit.
Thank you for the prompt delivery of my wheel chocks and trailer mirrors. I am looking forward to using them in a few days when I take my rig out for the first time
Qualty part and fantastic deal
The chocks are just as pictured. They work well, and are light weight to carry around. They hold my trailer steady while loading and unloading.
Looks good not used yet . Will in May
Supports our 24 foot trailer with no problems at all, way stronger than the 400 lb. limit we had on our other chock.
my 1984 Avion trailer it fit loosely not touching both tires but i will keep them just put one in front tire on one side and the other on back tire on other side
Thanks for the follow up making sure I received my order and on top of emails along the way I have not opened any of it yet but I am sure it will be right for I have ordered other stuff and it’s always been correct and very good products. Thank you to your whole staff for always being committed to quality service.
Good material and price was right!!!
Haven't used it yet, probably fine on the atv trailer if it is tall enough. Way to lite weight for the camper.
Do you have a question about this Wheel Chock?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.