Caliber Rover 360 Snowmobile Dolly Kit

Video Transcript for Review of Caliber Winter Weather Supplies - Rover 360 Snowmobile Dolly Kit Qty 3 - CA36AJ

Hi, everybody, Andy here with etrailer.com. Let's take a look at this Caliber Rover 360 Snowmobile Dolly Kit. This dolly kit is going to give you 360 degrees of movement, so you can easily roll your snowmobile in tight spaces, whether it be in your garage or in your shop when your snowmobile is not in use. And the 360 degree castle movement is going to take away the struggle of navigating your sled on dry ground. Now, all three of these dollies are the same except for the rubber pads. So let me take this dolly here and bring it closer so you can see.

So the set of pads that we have here are, what we can call our track pads. And these are going to sit perpendicular to the track. So when you engage your parking brake, the studs on the track will integrate with these ridges. So this is what you're gonna use for the rear of your snowmobile. And then on our two front dollies here, obviously, the pads are gonna look a little bit different.

And so what we have here are pads that are smoother because they're designed for your skis. And these pads are going to grip and support your skis. The textured rubber surface is going to make sure that your snowmobile stays in place during movement. And then the center channel there is going to suspend the keels up to 2.5 inches deep. So again, this will suspend keels up to 2.5 inches deep.

So it's gonna let your carbides float so they're not damaged during transport. And then, as you saw, we have these adjustable straps here that are going to secure the dollies to your skis. So it's gonna be very easy to use. These dollies are very durable, they're very tough. They're made of high quality, very strong plastic, so they're gonna hold up really well for you.

I did wanna point out that the casters will need to be installed when you get these and it can be a little bit difficult, so you wanna make sure that you you can apply enough pressure to get the casters in to the holes. But once you have them in, they're gonna stay in there and they'll be very secure. But again, it's very easy to roll around. They don't feel like they're gonna bind up or anything like that. They're gonna move very smoothly for you. If you're wondering about some dimensions, they're going to be 12 inches by 12 inches. And then the height is about 5.5 inches tall. And the wheels, the casters, they're three inches in diameter. But very well built, very well designed in my opinion. I'm very impressed with the build quality on these dollies. Now, if you don't need all three, the good news is, you can get these in a set of two, maybe you just want 'em for your front skis. You don't need a third one for the back. So if that's the case, on your screen, I am including the part number for just two dollies. You can just take that part number and pop it in the search field of our website and that will take you to that set of two if that would work better for you. Well, I think that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.