bing tracking image
  1. Wiring
  2. Deka
  3. Wire Connectors
  4. Ring Terminals
  5. 12-10 Gauge
  6. 3/8 Inch Diameter
Deka Ring Terminal - 12-10 Gauge - 3/8" Ring ID - Nylon Insulation - Yellow - Qty 1

Deka Ring Terminal - 12-10 Gauge - 3/8" Ring ID - Nylon Insulation - Yellow - Qty 1

Item # DW05741-1
Our Price: $1.62
Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.06 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
This yellow ring terminal fits 12-10 gauge wire and has an inner ring diameter of 3/8". Insulated with heat-shrinkable nylon for adjustability and durability. Great Prices for the best wiring from Deka. Deka Ring Terminal - 12-10 Gauge - 3/8" Ring ID - Nylon Insulation - Yellow - Qty 1 part number DW05741-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (6)
  • Q & A (0)
  • Videos (1)
  • Photos

Deka Wiring - DW05741-1

  • Wire Connectors
  • Ring Terminals
  • 12-10 Gauge
  • Deka
  • 3/8 Inch Diameter

This yellow ring terminal fits 12-10 gauge wire and has an inner ring diameter of 3/8". Insulated with heat-shrinkable nylon for adjustability and durability.


Features:

  • Fits 12-10 gauge wire
  • 3/8" Ring inner diameter
  • Heat-shrinkable nylon insulation allows for adjustability and provides durability
  • Yellow
  • Quantity: 1
  • 1-Year limited warranty


05741 Deka Ring Terminal - 12-10 Gauge - 3/8 Inch Ring Inner Diameter - Nylon Insulation - Yellow - Qty 1





Video of Deka Ring Terminal - 12-10 Gauge - 3/8" Ring ID - Nylon Insulation - Yellow - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Deka Wiring - Wire Connectors - Ring Terminal - DW05741-1

Hello everybody, this is Jeff at etrailer.com. Today, I'm gonna take a look at this Deka 12 gauge and 10 gauge ring terminal with the 3/8 inch ring, has the yellow nylon heat shrink insulation, and it is for a quantity of one terminal. Now, this yellow ring terminal will fit onto the end of a 12 to 10 gauge sized wire, has an inner ring diameter of 3/8 of an inch. Now, the ring on this is a 3/8 inch ring, which means the terminal's designed to fit onto 3/8 inch studs or screws. And just to show you, we're gonna go ahead and put a ruler on it just so you can see there's your 3/8 inch inside diameter of the ruler. The insulation on this, you can see it is a heat shrinkable nylon installation.

So it allows for adjustability, provides durability when you're connecting the wire to the terminal. And the yellow color on this heat shrink insulation indicates that it fits 12 to 10 gauge wires. Now, these terminals are also available in other sizes that will fit smaller gauge wires like a 16 to 14 gauge and 22 to 18 gauge wire, and also other stud or screw sizes. In wires, if you're familiar, the larger the gauge number means the smaller the wire size. But that should do it for the review on the Deka 12 gauge and 10 gauge ring terminal with the 3/8 inch ring and the yellow nylon heat shrink insulation.

.

Customer Satisfaction Score:


Customer Reviews

Deka Ring Terminal - 12-10 Gauge - 3/8" Ring ID - Nylon Insulation - Yellow - Qty 1 - DW05741-1

Average Customer Rating:  4.8 out of 5 stars   (6 Customer Reviews)

This yellow ring terminal fits 12-10 gauge wire and has an inner ring diameter of 3/8". Insulated with heat-shrinkable nylon for adjustability and durability.

by:

Order was complete and delivered in a timely manner.



by:

Works great. Easy to use.



by:



by: 02/28/2024



by:



by:


6
6

See what our Experts say about this Deka Wiring

  • Where Should Ground from 7-Way Connector be Installed
    You will simply want to connect your Ground wire to a clean, bare-metal surface on your vehicle. This can be done with a ring terminal like part # DW05740-1, which has a 1/4" ID, or part # DW05741-1, which has a 3/8" ID. i have attached a video of our Universal Installation Kit # ETBC7 being installed on a 2012 Ford Van where you can see this being done at the 2:00 mark.
    view full answer...
    Image 1 for
  • Parts Needed To Use Curt Echo Trailer Brake Controller On a 2020 Acura MDX Without a Tow Package
    I do see the Receiver # C13146 and 4-Way # 118628 you got from us for your 2020 Acura MDX. Depending on if you got a 7-way like our Kit # ETBC7 which includes the wiring needed for a charge line or just an Adapter # 37185 will decide what all you need to use the Curt Echo # C51180. If you only have the Adapter # 37185 you are going to need enough 10 Gauge Wire # DW02508-1(sold by foot) to run from the battery to the 7-way, Circuit Breaker # 9510, two Ring Terminals # DW05740-1 for connecting...
    view full answer...
  • How to Connect 6V and 12V Batteries for 12V Battery Bank
    You will make your battery bank larger (run time for your RV longer) if you run the 6V batteries in series and then those to the 12V battery in parallel. You'll need 10 Gauge Wire # DW02508-1 as well as ring terminals like the 1/4" # DW05740-1 or the 3/8" # DW05741-1 to complete this installation.
    view full answer...
    Image 1 for
  • Troubleshooting Lack of Power at 7-Way Plug on a 2021 Ford Explorer
    If you have the factory tow package on your 2021 Ford Explorer and a 7-way harness, you do not need to have the trailer connected to the plug in order for you to receive power on the 1 o'clock power pin. If you have the fuses already checked out and they are fully functional, the problem might be with the plug or the 12v power wire itself. To rule out the plug, I recommend making sure there is no corrosion or buiIdup in the plug itself. Any corrosion or buildup can cause a loss of signal....
    view full answer...
    Image 1 for
  • Wiring Needed To Install A Curt Echo and Curt 7-Way With Backup Alarm On a 2016 Kia Sportage
    The first step will be completing the installation of the Curt Trailer Connector Adapter with Backup Alarm # C57102 on to your 2016 Kia Sportage. You will need enough 12 Gauge Wire # 12-1-1 to run from the 7-way to where you will be tapping into the battery 12 volt source. This is sold by the foot so remember to account for all the bends along your Sportage to get it to your battery source. A Deka Ring Terminal # DW05741-1 will help you to connect to your power supply. The best way to...
    view full answer...
  • Why Do Trailer Lights Flicker When Hitting Bumps
    In order to fix the issue with your lights flickering you will want to pick a good spot on the trailer frame near the coupler and then run a ground wire from each of the lights as well as the trailer connector to this point. If you need to extend the wires you can use part # DW02359-1 and part # DW05744-5. Once you find a good ground point, sand the surface down, twist the wires together after you have removed part of the jacket, and then attach it to the sanded surface with part # DW05741-1...
    view full answer...
  • Parts Needed To Install a Curt Echo Wireless Trailer Brake Controller on a 2017 Toyota Tacoma
    The Curt Echo # C51180 will require you to have the charge line circuit of your 7-way connected to power the Echo. We have actually designed a 7-Way RV Upgrade Kit # ETBC7L that is specifically designed for the Echo so that you will not need the wiring for a brake controller mounted in your cab. Since you already have a 7-way you will only need some 12 Gauge Wire # 12-1-1 (which we do sell by foot), a 30amp Circuit Breaker # 7012A and the Connectors # DW05745-1, # DW05740-1, # DW05741-1...
    view full answer...
  • Parts Needed to Re-Wire 18 Foot Car Hauler Trailer with 7-Way Connector
    To re-wire your 18 foot car hauler with electric brakes on one axle, I recommend using a wiring junction box like # 38656 in order to make the connections from the lights and brakes. Then for a 7-way trailer plug, you can use the Hopkins # H20046. This connector has an 8 foot lead. The shorter 6 foot # H20044 or 4 foot # H20043 trailer connectors are also available. I recommend using a circuit tester like # 40376 to determine the functions for any wires that are not known, as just using...
    view full answer...
  • Parts Needed For Installing Electric Trailer Brakes On a Utility Trailer With Dexter 3,500LB Axle
    First you will need to verify that your Dexter axle has a Brake Flange # 4-35 to attach the Electric Trailer Brake Kit # AKEBRK-35-SA. The brake kit includes both the left and right side brake assemblies which are self-adjusting for better performance and to save you on having to adjust the brakes every 3,000 miles. Next you will need 2 Easy Grease Trailer Hub and Drum Assemblies # AKHD-545-35-EZ-K to replace your idler hubs. These have your same 5 on 4-1/2" bolt pattern along with the...
    view full answer...
  • Parts Needed To Add Curt Echo Trailer Brake Controller To a 2022 Toyota RAV4 With Factory 4-Way
    As you already have the Curt Trailer Connector Adapter # C57672 to connect to the 4-way on your 2022 Toyota RAV4, the Curt Echo Wireless Trailer Brake Controller # C51180 only requires an additional charge line to be ran. For this you will need some 10 Gauge Wire # 10-1-1 to run to the battery. This wire is sold per foot so be sure to get enough for routing safely and away from rotating parts or exhaust to prevent damage to the wire. Cable Ties # DW05724-25 will work well to secure the...
    view full answer...
  • How To Connect A Front Clearance Light With Single Wire On a Motorhome With 2 Wire Connectors?
    It sounds like you are trying to replace a front clearance light on your 1996 Four Winds motorhome with a Optronics LED Clearance # MCL95AB which only has a single wire connection. This style of light uses the mounting bolt hole to act as the ground connection. But since your cap is going to be constructed of fiberglass you will need to use a Ring Terminal # DW05741-1 to connect the ground wire from your chassis. You might consider switching all your clearance lights to the Optronics LED...
    view full answer...
  • Troubleshooting Ground Wires Getting Hot On Tilting Snowmobile Trailer
    If the ground wires and pins are getting hot, it sounds like either they are not a ground or there is probably a short somewhere in the wiring you will need to find. First you want to check the trailer wiring to make sure the wire coming from the ground pin is attached to a clean bare metal surface. Check the vehicle plug with a circuit tester like part # PTW2993 and make sure it is not getting a feed from the vehicle. Check for corrosion on any of the pins and make sure there are no...
    view full answer...
  • 7-Way and Light Kit Recommendation for Boat Trailer
    The cleanest way to install the # HM20048 would be to use a junction box like part # 38656. The junction box is weatherproof to protect the wiring connections from the elements. You'd also need some ring terminals, one 10 gauge # DW05741-1 and four 14 gauge, part # DW05702-1. I've linked you to a video showing the junction box being installed. The part # TL16RK is a submersible trailer wiring kit that would work well on your trailer as well.
    view full answer...
  • Parts Needed to Re-Wire Car Hauler Trailer Lights and Brakes
    We can help you with selecting parts to re-wire your trailer's lights and brakes. Trailer size affects the number and types of lights required to be DOT-compliant. I linked for you an article that covers the lighting requirements for trailers of various sizes. This will help you determine what is required for your specific trailer. For lighting you might want to consider one of our complete lighting kits. Kit # TL29BK uses standard incandescent light bulbs and kit # TLL9RK uses high-efficiency...
    view full answer...
  • Installing HM20048 Molded 7-Way Trailer Connector on Surge Brake Equipped Boat Trailer
    If you scroll to the bottom of the product page of the # HM20048 connector, you can see the color code chart that shows which colored wire carries which function. The yellow wire on the # HM20048 would carry the signal from the reverse lights, assuming that the center pin of the trailer connector is tied into the reverse lamp circuit. Since you're using a surge brake system, you won't need the blue wire as you suspected. If the trailer doesn't have a battery or any accessories that require...
    view full answer...
    Image 1 for
  • Brake Controller Power Wire Missing on 2009 GMC Sierra
    It is possible that the previous owner was not aware of the tow package wiring and connections that need to be made under the hood of your 2009 GMC Sierra. The tow package power wire under the dash essentially goes directly under the hood over by the power distribution box. If it is present then it might be there off to one side. If not then there is no reason why you can't run your own wire from the brake controller to the positive post that the factory wire would normally attach to....
    view full answer...
  • Does etrailer Axle Teknology 10-Inch Brake Assembly AKEBRK-35L Include Trailer Wiring
    The etrailer Axle Teknology 10-inch brake assembly # AKEBRK-35L and the matching right-hand unit # AKEBRK-35R come with two wire leads (from the brake magnet) that are just a few inches long. The actual 10-gauge wire you'll use to install the brakes, # 10-1-1, is offered by the foot. Either wire lead from each brake can be used for hot or ground since these are non-polarized. Often parts like junction box # 38656, 7-pole plug # H20046 and ring terminals # DW05741-1 are used to complete...
    view full answer...
  • Repairing Ground Problem on Trailer With Tilting Bed
    You do indeed have a ground problem, but no worries-we can get you through this! A trailer with a tilting bed will typically use a bolt on each side as a pivot which allows the tilting portion of the trailer to move. When the trailer is new, the pivoting mechanism fits together tightly and everything works great. Over time, this connection gets a little loose, and doesn't provide a consistent ground connection. Since trailers use the frame as the ground circuit instead of a separate wire,...
    view full answer...
  • Wiring Needed To Attach a Charge Line On The Motorhome When Flat Towing a Vehicle
    Since you are running 50' of wiring you will want to use 10 Gauge Wire # 10-1-1 which we sell by the foot. Roadmaster has their Battery Charge Line Kit for Motorhomes # RM-156-75 which only comes with 30' of 12 gauge wire. You can build a similar kit with the wiring, Circuit Breaker # PK54220PL, two 10 gauge Deka Ring Terminals # DW05762-1 to connect to the circuit breaker, a 3/8" Ring Terminal # DW05741-1 for connecting to the battery and some Wire Loom # 7509-1 to protect the wire under...
    view full answer...
  • Getting Power to 12-Volt Accessory Pin on 7-Way Trailer Connector
    To get power to the pin in the 1:00 position of the # PK12703 7-way trailer connector, you'd run a length of 10 gauge wire # 10-1-1 which is sold by the foot from the terminal for the 1:00 pin on the 7-way to the positive battery terminal, via a # 9510 40 amp circuit breaker. You'd need two # DW05741-1 ring terminals to connect to the breaker and a # 44-5356A ring terminal to connect at the battery.
    view full answer...
    Image 1 for
  • Alternate Ways to Install a Ground Wire
    If you do not have the ability to install standard sheet metal screws, there are a couple things you can do. You can drill holes in the sheet metal for the bolts to go through. You would then use a lock washer and nut on the other side to secure everything. You could also weld the ground on, but this would not be the best solution as electronic components due end up needing to be replaced on occasion. The last option would be to run the ground wire to something that is already bolted...
    view full answer...
  • Troubleshooting Electric Trailer Jack Not Working With Jack It Bike Rack On Travel Trailer
    It sounds like your tongue jack is similar to our Electric Jack # EJ-3520-BBX in it only has one power wire coming from the motor and uses the mounting hardware to ground to the trailer frame. When you add the Jack-It 2 Bike Rack # LC429756 between the frame and the jack the layers of paint are eliminating the electrical connection to the frame. You can fix this by grinding the paint off the steel where the metal contacts metal and painting over that when everything is installed to give...
    view full answer...
    Image 1 for
  • Troubleshooting Tekonsha Prodigy P3 Having 0.0 Output When Brake Pedal Is Pressed
    It sounds like there is a few different issues going on with the Tekonsha Prodigy P3 # 90195 in your vehicle. Starting with the output you should see output on the controller when you are applying the brakes on the vehicle. Since the output goes up with the manual override lever engaged it is likely that the red wire from the back of the controller is not corrected to the correct stop light switch wire. The red wire needs to connect to the cold side of the stop light switch that only...
    view full answer...
  • Replacement Ring Terminal for Curt Trailer Wiring Harness 2019 Hyundai Tucson
    For a replacement ring terminal that came with the Curt trailer wiring kit part # C89KR that you referenced you'd want the # DW05741-1. For a replacement battery line you'd want the part # 55151.
    view full answer...


< Previous
12



Do you have a question about this Wiring?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Laura H
Written by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.