bing tracking image
  1. Wiring
  2. Deka
  3. Wire Connectors
  4. Butt Connectors
  5. 16-14 Gauge
Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5

Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5

Item # DW05744-5
lowest price pledge
Our Price: $8.28
Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.02 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Need help with installation?
Locate installers near me
This blue butt connector joins two lengths of 16-14 gauge wire. Insulated with heat-shrinkable nylon for adjustability and durability. Lowest Prices for the best wiring from Deka. Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5 part number DW05744-5 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (333)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Deka Wiring - DW05744-5

  • Wire Connectors
  • Butt Connectors
  • 16-14 Gauge
  • Deka

This blue butt connector joins two lengths of 16-14 gauge wire. Insulated with heat-shrinkable nylon for adjustability and durability.


Features:

  • Fits 16-14 gauge wire
  • Heat-shrinkable nylon insulation allows for adjustability and provides durability
  • Blue
  • Quantity: 5


05744 Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5





Video of Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Deka Wiring - 16-14 Gauge Butt Connectors - DW05744-5

Jeff Hello everybody this is Jeff at etrailer.com. Today we're gonna take a look at the Deka blue butt connectors for the 16-14 gauge size wire and this is for a quantity of five connectors. Now these blue butt connectors will join two lengths of 16 gauge or 14 gauge sized wire and it will insulate the connection with the heat shrinkable nylon for adjustability and durability. Now the blue color on this will indicate the size wire this connector will fit. This one will fit the 16-14 gauge sized wire. And if you forget what color size fits what, it is also stamped on here.

16-14 AWG. Now to install the two wires, what you'll want to do is take your two wires that you're going to connect together and you'll strip off about a quarter of an inch of insulation on each end of the wire. Take your first wire, stick it into this end right here, and push it all the way until it stops. Basically there's a metal casing right there in the middle and in the very center is a little stopper. So when you push the wire in it'll stop and that should put that in the metal casing.

Once you make sure that the stripped portion is under the metal casing, take your crimper, crimp it all the way down until you make a good connection. And then you'll do the same with the second wire. Take the stripped end, stick it all the way in until it goes no further. Make sure it's under the metal or the stripped portion is under that metal casing. And then use your crimper and crimp that side down.

With both of them crimped, then what you'll wanna do is just tug on them, hold both wires and just tug on them. Make sure you have a good connection. Once that's good then what you'll do is get a heat source, like a heat gun, and then just apply heat over this insulation and it will cause this nylon insulation to shrink and it will completely seal around your connection and prevent the elements from causing a problem with your connection. Now this part is for a quantity of five connectors. We do also sell it as a single connector, its part number DWO5744-1.

Or as a ten pack which is part number DWO5744-10. But that should do it for the review on the Deka blue butt connectors for the 16-14 gauge size wire for a quantity of five..


Customer Reviews

Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5 - DW05744-5

Average Customer Rating:  4.8 out of 5 stars   (333 Customer Reviews)

This blue butt connector joins two lengths of 16-14 gauge wire. Insulated with heat-shrinkable nylon for adjustability and durability.

- DW05744-5
by:

I would like to really thank the team at etrailer for making my order correct. George, Amy and Carol all worked well with communication with me when there was a small issue with the amount of connectors I ordered. They made things right and I have nothing but appreciation for their work and attention to detail to help me out. Thank you again and I will be doing business again!! A+



- DW05744-5
by:

Easy to use fasteners. Would purchase this again.



- DW05744-5
by:

It’s just a satisfactory product. The vinyl shrink connector did shrunk after being heated but it didn’t shrink tight enough. Only time will tell if I will have corrosion in the connected wires when I start launching my jet ski trailer again. My jet ski and trailer has been stored since the pandemic.



- DW05744-5
by:

I have found that the 16-14 Gauge Deka Heat aren't quite as good as their larger 12-10 Gauge counterparts. They still work very well, but the heat shrink shielding is a bit thinner and seems to split easier when making a crimp, and had experiences where the connecter wouldn't grab a 16-gauge wire on the first try. All total I've had an approximate 20% failure rate with this gauge connecter which I feel is a bit high considering their price point. I will use them again in wet use applications, but would like to see some improvements.


Comments
No additional failures once installed after one year.
Brett F - 08/17/2018



- DW05744-5
by:

Worked as intended



- DW05744-5
by:

Had to buy an extra at local auto parts store. Could not get wires to stay in connector long enough to crimp properly.



- DW05744-5
by:

Works like a charm!



- DW05744-5
by:

Worked great with the bark assembly ins tall.



- DW05744-5
by:

Fast shipping, and have what is needed in stock to get your trailer on the road again.



- DW05744-5
by:

All good so far quick delivery.



- DW05744-5
by:

Very good service. Have not installed the lights on my trailer yet but all looks as expected.



- DW05744-5
by:

made the trailer light installation very easy to install by removing the old light and install the new led light so using these butt connectors made it easy and painless. Also they were not badly priced so one stop shopping allowed me to order them with my new lights...


Comments
Everything is working perfect and thank you for the follow up. I will be buying more when the time comes that I need something you carry and I recommend you to all of my friends and colleagues,
kevina - 07/05/2018



- DW05744-5
by:

Great, brand name products and some hard to find LED side marker lights. Refurbished an old EZ Loader boat trailer for carrying kayaks. Old incandescent lights were rotted off of the frame and the side marker lights in the fiberglass fenders were inside rubber grommets that were dry rotted. Etrailer had all the replacement lights, available in LED, and beat the price of any other option. Quality products. Delivered in 2 days under a free shipping promo. Etrailer is saved to my favorites for any trailer needs. Pic of the Yak project attached. New tail, fender and side marker LEDs!



- DW05744-5
by:

Quality products...excellent follow up to solve problems in shipping ,as a lens was cracked in box when I received shipment...an email and pic to etrailer and replacement was in mailbox in two days!!!...small problem with license bracket LP10sb, very good quality for price but mount holes had to b redrilled higher to fit properly with light # STL9rb...overall great service and quality products ...about to order more parts after this review!!!...twisty



- DW05744-5
by:

I installed the pop and lock on my 2017 Honda Ridgeline. It was easy to install and it is wired to remotely open or use a key. It has worked without any issues. I'm very satisfied.


Comments
I wired the Pop & Lock to open remotely and it has worked every time. I used a different approach than what the Utube video had demonstrated.
Juris R - 04/23/2020


- DW05744-5
by:

My order was simple, some heat shrink and a few heat shrink butt connectors, no surprise that what I ordered is what was sent. The surprise I did get it how fast the order was processed and shipped. Shipping throughout the country right now is hit or miss- I’ve got an order from a major U.S. distributor for some simple tools, placed 2 weeks ago and still being “processed”...this order with etrailer was like 4 days, including a weekend, from when I clicked submit til it was in my mailbox. That’s outstanding! Thank you!



- DW05744-5
by:

Love these, they were easy to use and are definitely going to keep the moisture out of the connection.


Comments
Still working perfectly!
Derek - 10/25/2019



- DW05744-5
by:

I purchased electronic trailer breaks for my camper. These breaks are an excellent product at a great price. The tutorials that etrailer offers are incredibly helpful and a superb resource. Their customer service is also spot on. When it comes time to work on my boat trailer I know where I'll be going for parts and/or help.



- DW05744-5
by:

Works perfectly as installed from the video instructions on my 2016 Chevy Colorado. More than pleased with Etrailer.....


Comments
Product works great, couldnt be happier with the quality.
Fred W - 04/12/2018



- DW05744-5
by:

Order arrived very quickly. Placed on Friday, arrived on Tuesday from Mo to Pa. Items were packed well and arrived in good condition. Upon initial inspection all items appear of good quality. Ordered tires, brakes with backing plates, hubs ,seals and grease. Haven't installed any items yet, but I am sure I will have no issues. Free shipping is a plus. Additionally unlike other free shipping offers that are out on the back burner for a week, order was processed and shipped promptly. I have recommended etrailer to friends and would highly recommend them to anyone.



- DW05744-5
by:

Because I just received my product, what I am really reviewing is the process for selecting it and the customer service I received. First, my order came very quickly. The part of the process that I appreciated the most was the videos available with each part to show installation. They made it very easy to know that I was ordering exactly what I needed.



- DW05744-5
by:

Helped with wiring new lights.



- DW05744-5
by:

Just received my order of new backing plate assemblies and some misc small parts. Ordered on line late Sunday night, confirmed I had ordered the right parts Monday morning before shipment went out. Customer service by phone was superb and the gal I talked with was perfect. Shipment was on my porch Friday afternoon. I did open box and inspect shipment that arrived completely intact/good shape and all looked good at this point. Not sure when will get to the brakes on the trailer but will post again when the job is done. So far nothing but good to say about Etrailer.com. Regards, John.



- DW05744-5
by:

etrailer has always been a pleasure to do business with. The products are easily found on the site. The product offering is broad. The information and videos about product application and use are terrific. Shipping is always on time. I have three trailers and shop here several times a year at etrailer.



- DW05744-5
by:

Lights are Bright and easy to install. I completed the job in 20min. The Deka Heat Shrink Butt Connectors made a nice water tight seal. Appreciate the prompt shipment of my order


25
338
Show More Reviews

Ask the Experts about this Deka Wiring



  • Troubleshooting Running Lights that are Blinking When Turned On
    Whenever we see lighting issues it usually stems from a bad ground or a short somewhere. This can be the result of a bad 7-Way connector or wiring. Since you have exposed wires where you have done your splicing I highly recommend using some heat shrink butt connectors to get your wiring all sealed up properly. You can use part # DW05745-5 for the bigger 12-10 gauge wires and part # DW05744-5 for the smaller 16-14 gauge wires. These are heat shrink connectors which will seal around the...
    view full answer...
    Image 1 for
  • Wire Gauge Used for Low Profile RV Combination Tail Light # RVSTL61
    I went out to the warehouse and used our wire gauge measuring tool to measure the wiring on Low Profile RV Combination Tail Light # RVSTL61. It falls between 16 and 18 gauge wire so at the tightly wound ends it would measure a little smaller. So in other words 16 gauge. For heat shrink butt connectors for 16-14 gauge wire we have # DW05744-10 for a 10 pack and # DW05744-5 for a 5 pack.
    view full answer...
  • Recommended Wiring Connectors for 14 to 16 Gauge Wires to Protect From Weather
    I have a solution for you, but the # 05731-5 are not heat shrink style butt connectors, so heating them isn't going to provide any protection. Instead I recommend using the Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5 # DW05744-5, which can be heated up to provide some insulation from the elements. This would be the best solution it sounds like and would be my recommendation.
    view full answer...
  • Is a Breakaway Kit Required on an Old Trailer
    In order to determine if a breakaway system is required on your trailer you will need to contact your local DMV. This will vary from state to state. However, it is a good ideal to add a breakaway system regardless of your state's regulations as they will help to protect others on the road and your trailer in the event of an accident. Breakaway systems are relatively inexpensive and can easily be installed with minimal effort. I recommend the Hopkins Engager Push-To-Test Trailer Breakaway...
    view full answer...
  • Recommended Converter From 3 Wire System To 2 Wire System For 2005 Isuzu
    For your 2005 Isuzu, I recommend the Vehicle to Vehicle Tail Light Converter # 118158 to make your 3 wire system compatible with a standard trailer wiring. You can use the Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5 # DW05744-5 for this application.
    view full answer...
  • Best Option Installing the Wesbar 403075 Tail Light on a Jet Ski Trailer
    If your current light assembly is not a sealed unit, then you should be able to just replace the bulb as long as both bulbs are interchangeable. If the light assembly is a sealed unit, I would not recommend trying to change out the bulb. Breaking the seal could cause a risk of water contamination in the light when submerged. In this case, you can install the new light using heat shrink butt connectors, like the Deka # DW05744-5 in 14-16 gauge wire. Just cut off the plug and use the butt...
    view full answer...
  • License Plate Light Compatibility with Tekonsha T-One Wiring Harness for 2018 Jeep Cherokee
    A relocated license plate bracket light will work with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118605 you reference. You will simply splice into the brown running light wire after the converter box to get that running light signal. You most likely will need to ground the light to the bracket if it is metal or to the frame of your vehicle. I recommend using heat shrink butt connector like # DW05744-5 for that connection and weather seal.
    view full answer...
  • Universal Wiring with Powered Module for 2008 Chevy Express 3500 Cutaway Van
    If you are looking for a wiring kit like the Hopkins # 31345 but that uses universal wiring as opposed to the connectors that tee in behind the tail lights on a 2008 Chevy Express Van then you will still need to use the Hopkins wiring kit as there are not any without the quick and speedy connection. However, you can just snip those connectors off and splice your connections This kit calls for splicing to your tail light wires whether it is with butt connectors or the included quick splices,...
    view full answer...
  • Why Is There Five Wires for the Brake Controller on a 2013 GMC Sierra 1500
    The wiring harness you have located on your 2013 GMC Sierra 1500 is the correct one that will need to be used to install the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. There is just an extra wire present that will not be used. This extra wire is for a backup light illuminate feature that is already integrated into the Tekonsha Prodigy P3. The wiring connections you will need to make are as follows: Vehicle to Brake Controller Adapter: Red to Black Dark Blue to Blue Light...
    view full answer...
  • What Harness is Required to Replace a Trailer Harness Converter Box on a 2006 Chrysler Pacifica
    You are exactly right, the only difference between the Upgraded Modulite, # 119190, and Modulite # 119147, is the compatibility with ST, STT, and PWM systems. Since your 2006 Chrysler Pacifica does not use these advanced circuit systems, you are better off going with the more cost effective modulite, # 119147. You won't be sacrificing any quality or capabilities that would be related to your vehicle. It sounds like you may already have an idea of how to replace the harness, but I'll a...
    view full answer...
  • Does 7-Way Molded Trailer End # 54006-009 Come with Heat Shrink Butt Connectors
    7-Way Molded Trailer End # 54006-009 does not come with the heat shrink butt connectors. You can add some for the smaller gauge wires using # DW05744-5. For the larger gauge power and ground wires you can use # DW05745-5.
    view full answer...
  • How Long Are The Wires on the Hopkins HM11141144 Wiring Harness?
    The wires on the Hopkins wiring harness item # HM11141144 are 6" long. I recommend using butt connectors instead of splicing the wires together so you have plenty of room. I have linked an install video. You will need 2 different size butt connectors because there are both 12 gauge and 14 gauge wires in the harness. I recommend item # DW05744-5 for your 14 gauge and item # DW05745-5 for your 12 gauge wires.
    view full answer...
  • Can the Factory Tow Package Connectors On Rear of 2006 Toyota Tundra Be Replaced
    I do have an option for you but we don't carry the factory plugs that connect to the Hopkins Plug-In Simple Vehicle Wiring Harness part # HM43385 on a 2006 Toyota Tundra. That said, you could indeed simply remove them and hardwire the wires using butt connectors like part # DW05745-5 and part # DW05744-5. I am not sure if you would even be able to find the connectors so in which case this would be the best option. If the wires don't color match you will need to test or look at the pin outs...
    view full answer...
  • No Power To Tail Lights with CM TX Flat Bed On 2020 Ford F-350 Super Duty
    It does indeed sound like the converter box has failed since you verified that you have good power going in but it gets reduced going out therefore all you should need to do to fix the issue is swap out the converter with the Hopkins Tail Light Converter Kit part # HM48895. The wires can be trimmed and modified as needed just be use heat shrink but connectors like part # DW05745-5 and part # DW05744-5 and secure the box as best as you can.
    view full answer...
  • Square Trailer Tail Lights with a Plug Connector for a Shorelander Trailer
    All of the similar trailer tail lights like # 2423056 either have blunt cut wires or you just insert the wiring to the backs of the lights. None have a plug. What you could do is use light # 2423056 (and # 2423006 for the left side) and splice the plug from your old lights to them. You would need to make sure the connection is water tight by using some heat shrink tubing such as # DW05744-5.
    view full answer...
  • Are the Blunt Cut Brake Controller Wires Under the Dash of a 07-13 GM Truck Circuit Protected
    It sounds like you are trying to install a brake controller on your 2010 GMC Sierra 1500. If this is the case then the truck would have came from the factory with blunt cut wires under the dash that already have the functions for a brake controller. You will need to splice the wires from the brake controller into the blunt cut wires under the dash with part # DW05744-5. I have attached a photo that shows what the functions are for the wires on the brake controller and vehicle. All of the...
    view full answer...
    Image 1 for
  • How to Install a Brake Controller on a 2007 Chevrolet Avalanche
    In order to install a Hopkins Reliance Brake Controller on your 2007 Chevrolet Avalanche you will need to first look under the dash next to the emergency brake pedal for a set of four blunt cut wires. They should be taped together and could also have some wire loom on them so you will want to look closely. These wires are for the brake controller and you will need to hardwire them using butt connectors like part # DW05744-5. The dark blue wire on the vehicle is for the brake output and...
    view full answer...
  • Solution for Trailer Lighting with Running Light and Stop/Turn Light Wire Backwards
    Try swapping the wires that run to the light. Cut them and then resplice them to the opposite wire on each side of the trailer. That will reverse the brightness issue you are having easily as it sounds like somehow each trailer assembly was wired backwards. For a 5 pack of butt end connectors we have the part # DW05744-5.
    view full answer...
  • Recommendation for Wiring to Allow Backing Up With Electric Lockout Solenoid on Surge Brake Trailer
    For your electric lockout solenoid on your trailer, I don't recommend using the parking lights as your signal. Although this works for daytime without issue, at night you will lose all of your trailer braking. Instead, I recommend you use the Deka Heat Shrink Butt Connectors # DW05744-5 and the Hopkins Endurance 5-Way Flat Trailer Wiring Kit - Vehicle and Trailer Ends # HM47890. This will give you a clean connection between your trailer and vehicle and allow you to properly connect your...
    view full answer...
  • Compatibility of the MaxxTow LED Off-Road Light Bar on a Ski Boat Light Tower
    Yes, the MaxxTow LED Off-Road Light Bar, # MT80630,will work well as a replacement for your halogen light on your ski boat. The light is durable and weather-resistant that would work well in on the water conditions. Using heat shrink connections like the Deka Heat Shrink Butt Connectors, # DW05744-5, will help ensure that your wire connections will remain water tight.
    view full answer...
  • Installing A Dexter Axle Brake Controller In a 2012 Ford F-250
    If you have a factory 7-way trailer connector on your 2012 Ford F-250, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3034-P will plug directly into your vehicle. You will have to splice the wires on the other end and use butt connectors like # DW05744-5 to connect them to your brake controller. You will not need an inline fuse as you wire this because your vehicle already has a fuse for a brake controller in location 31 according to your owners manual.
    view full answer...
  • How To Install the LED Light Strip In Place of an Existing Light Fixture
    If you will be using the LED Light Strip part # DG52683 to replace an existing light fixture all you will need outside of what is included with the kit are butt connectors, part # DW05744-5. There is a special pigtail that comes with the kit, one end plugs into the light strip and the other attaches to the wires used for the existing light fixture. In order to install the pigtail you just simply need to match the power and ground wires. I have attached a review video for you that may...
    view full answer...
  • How To Install the Draw-Tite I-Command Trailer Brake Controller On a 2016 GMC Canyon
    In order to install a brake controller like the Draw-Tite I-Command Trailer Brake Controller part # 5535 on a 2016 GMC Canyon you will need to splice into wires as there is no plug under the dash for you to use. That said, the wires are already run for you so this will be super easy to do with just some butt connectors, part # DW05744-5. In order to do this you will need the Brake Control Plug-In Harness part # 20127.
    view full answer...
  • Are Twist On Wiring Connector a Good Choice for Trailer Wiring Connectors
    I don't really like to recommend the twist style wire connectors as they have a reputation of not being as reliable as soldered connections or even butt connectors like the # DW05744-5.
    view full answer...


< Previous
123. . .14



Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Jeff D
Installed by:
Jeff D
Employee Nicholas E
Test Fit:
Nicholas E
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Laura H
Written by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.