Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the closed port quick spice self-stripping connector for a quantity of one.Now this closed port quick splice self-stripping connector is designed to splice into an existing wire without having to cut crimp or strip. Provides an open channel in the front for your existing wire and a closed channel in the back here for the tap wire to go into.This metal blade right here you can see is attached and that pierces the wires in each of the channels of the connector to make your connections. Pliers are required to squeeze down on that plate after your wires are placed in there. I'm going to demonstrate that in a minute here. This is for a quantity of one connector.Now this is designed to use a .. If you're going to tap a 14 gauge, 16 gauge, or 18 gauge wire to a 10 or 12 gauge existing wire.
The maximum power rating is 600 volts. And like I said, we're going to demonstrate here.So here's your . This is the larger 10 to 12 gauge existing wiring. So what you'll do is in that front open channel, you can just push this into your open channel, your existing wiring just like that, and then you can tap this smaller gauge wire right in the very back here. And it's a closed port, you can see when you insert this in and push it, it's closed off so it only allows it to go so far.So with both of those wires in there, what you'll want to do is take your pliers, put it onto the blade right there, push them together just like that, and then you can see once there, make sure it's totally pushed down.
Once it's like that you made your connections, you tapped your wire into your existing wire, then you can push your cover on it closed, and see right there it'll clip on. That cover will protect your connection also. And then you're all ready to go. You've tapped this wire into your existing wiring.But that should do it for the review on the closed port quick splice self-stripping connector for a quantity of one.
Average Customer Rating: 4.3 out of 5 stars (9 Customer Reviews)
Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.Work great!
Got what I ordered ontime. No issues.
Do you have a question about this Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.