bing tracking image
  1. Wiring
  2. Spectro
  3. Wire Connectors
  4. Quick Splice Connectors
  5. 18-16-14 Gauge
Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1
Spectro

Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1

Part Number: SWC502905-1
In Stock
$2.26
Wiring
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Need help with installation?
Locate installers near me
Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire. Great Prices for the best wiring from Spectro. Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1 part number SWC502905-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Videos (1)
  • Photos

Spectro Wiring - SWC502905-1

  • Wire Connectors
  • Quick Splice Connectors
  • 18-16-14 Gauge
  • Spectro

Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.


Features:

  • Closed port quick splices self-stripping connector
    • Designed to splice into an existing wire without having to cut, crimp or strip
  • Blade attached to pierce the wires in each of the channels of the connector
  • Provides an open channel for existing wire and a closed channel for tap wire
  • Comparable to the 3M blue quick splice
  • Pliers needed to squeeze down on the blade after wires are placed


Specs:

  • Quantity 1
  • Gauge: 18-16-14
  • Maximum power rating: 600 volts
  • Color: blue
  • Additional tools needed: pliers


502905 Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1





Video of Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Spectro Wiring SWC502905-1 Review

Speaker 1: Today we're going to take a look at the quick splices 14-, 16-, 18-gauge blue self stripping connector. It's for a quantity of one. Now this is a closed port quick splices self-stripping connector. It is designed to splice into an existing wire without having to cut, crimp, or strip the wire. Provides an open channel in the front for your existing wire. And then in the back is a closed channel for the tap wire.

The blade right up here on top, well, that's what will pierce the wires in each of the channels when you push down on it. And then you just put the cover over it and complete your connection.Now there are pliers required to squeeze down on that blade after your wires are placed in it. Now this part is comparable to the 3M blue quick splice connector. This is for a quantity of one. The connector color is blue.

And again, it's for a 14-, 16-, or 18-gauge wire and the maximum power rating is 600 volts.So what I'm going to show you here . I happen to have two 14-gauge wires, so what you'll want to do, like we mentioned, the front is all open, so you put your wire in there that you want to tap into. Then, you'll take your wire and on the back channel it'll only go . you push the wire in, it will only go so far 'cause it's a closed port on the back one. So you push that all the way.

Then once you get them all the way to where you want them, just take your pliers, put it on there, push down on it, just like that, and once you push down enough, you'll see that that has connected those. Then, just take your cover and that snaps right over there. As simple as that, you've tap into the wire without having to do any cutting, crimping, or stripping of the wire. That should do it for the review on the quick splices 14-, 16-, 18-gauge blue self stripping connector for a quantity of one.

Customer Satisfaction Score:


Customer Reviews

Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1 - SWC502905-1

Average Customer Rating:  4.7 out of 5 stars   (16 Customer Reviews)

Closed port quick splices self-stripping connector is a 2 channel wire connector that is designed to splice into an existing wire without having to cut, crimp or strip the existing wire.

by:

It's a quick splice connector, does what it's supposed to do. However, you can find these a lot cheaper than $1.73 each. I found 50 for $7.47 ($0.14/each). Do your research.



by:

Worked like a charm. Definitely the easiest way to join two wires!



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


16
16

See what our Experts say about this Spectro Wiring

  • How Would Lighted Thule License Plate Holder # TH35JV Wire to Taillight Kit of Bike Rack
    The Thule License Plate Holder part # TH35JV only uses the running light circuit and ground circuit for wiring. So if you were to run taillights onto your bike rack as well you'd need to splice the # TH35JV into the brown wire and white wire of the wiring and you'd be set. For an easy way to make this connection you could use quick splices like the part # SWC502905-1.
    view full answer...
  • Quick Splice Connectors for Installing Optronics LED RV Interior Dome Light # RVILL33
    The quick splice connectors part # SWC502905-1 would cover your wiring needs for the # RVILL33 as this is designed to fit wire gauges between 14 and 18 which would be standard for the wiring of this light.
    view full answer...
  • How To Install Redarc Tow-Pro Elite RED44FR In 2021 Hyundai Palisade
    I would be happy to help! While you are correct that your 2021 Hyundai Palisade comes prewired for a 7-way connector, there is not a trailer brake controller harness compatible with the trailer brake controller port underneath the dash of your vehicle. What I recommend is getting the 7-way connector from your local Hyundai Dealer as they are currently the only people that have one available that will plug into your vehicle without splicing or running wires. Then to install the Redarc...
    view full answer...
  • Is There a Pigtail for a Peterson 164R Light That Can be Linked Together?
    It looks like we do have the Right Angle 2-Wire Pigtail for Peterson Trailer Lights - 2-Prong PL-10 Plug - 6" Lead # B162-49 that will definitely fit your 164R lights. Unfortunately, Peterson does not offer a pigtail that has pass-through capabilities at this time. However, what you may be able to is use something like the Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1 # SWC502905-1 to quickly and easily splice one black wire to the next.
    view full answer...
  • Parts Needed to Add Separate License Plate Bracket and Light With Peterson Light Kit M540
    You can tap into the running lights(brown wire) on the Peterson Light Kit # M540 with a Tap # SWC502905-1. That will allow you to run 16 Gauge Wire # 16-1-1 to a Optronics LED Trailer License Plate Light # OPT97FR. You will be able to ground the negative wire to the steel frame, as your light kit uses the frame for the ground circuits.
    view full answer...
  • How To Install the Optronics Thinline LED Trailer Fender Light
    The Optronics Thinline LED Trailer Fender Light part # MCL67ARB comes with a mounting bracket so as long as the surface you will be installing it on is metal then yes, it will work for you. All you would need to do to install the light is use two self tapping screws like part # 1131832 to mount the base and then once this is done you can attach the light to the base. To complete the process you will then need to attach the black wire to the running light circuit on your trailer which is...
    view full answer...
  • How to Hardwire Hopkins Smart Hitch Backup Camera HM50002
    Hopkins Smart Hitch Backup Camera # HM50002 is made with a plug-in 7-way connector to provide the reverse light signal to trigger it, but it can still be hardwired. The red wire on the Hopkins needs to connect to the vehicle reverse light circuit; the black wire connects to the reverse light ground. You'll need 2 quick-splice connectors # SWC502905-1. You can find the reverse light wire by removing a tail light and tracing the wires to that bulb or you can use a circuit tester like # PTW2992...
    view full answer...
  • 4-way Round Trailer Connector to 4-way Flat Connector
    I have a solution for you. However, we do not have an adapter to fit your 4-pin round connector on your trailer. Because of the rarity a 4-way round connector, I recommend either cutting off the 4-way round and attaching a 4-way flat, or splicing a 4-way flat into your wiring in addition to the 4-way round. To attach a 4-way flat, you can use part # HM48035. If you remove your 4-way Round connector, you will want to use butt connectors # DW05744-5. If you want to add the 4-way Flat...
    view full answer...
    Image 1 for
  • Installing Prodigy P3 Brake Controller on 2016 Forest River Forester on Sprinter 3500 Chassis
    I can help you find the parts you will need to install a Prodigy P3 Trailer Brake Controller # 90195 on your 2016 Forest River Forester on a Sprinter 3500 chassis. The P3 will need to be hardwired since there is not a custom wiring harness available for the 2016 Sprinter 3500. The parts you will need to install the brake controller are: Approximately 35 feet of duplex wire # 10-2-1 30 amp circuit breaker # 38630 A 5 pack of 10-12 heat shrink butt connectors # DW05745-5 2 yellow ring...
    view full answer...
    Image 1 for
  • Converting 2009 Toyota Tacoma Factory 4-Way Connector to a 5-Way Connector
    The easiest thing to use would be adapter part # 20036. It provides the extra wire for reverse lights to be run separately from the vehicle 4-Way flat. You could also re-wire the current 4-Way connector with a new standard 5-Way using part # HM37908. You could match the wires as they currently are, and run the blue wire to the reverse light circuit and splice in using a quick splice connector, part # SWC502905-1.
    view full answer...
  • Connecting The Reverse Wire Circuit Of a Stealth Hitch Towing Kit 7-Way On a 2021 Hyundai Palisade
    To connect the reverse wire of the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # 391HYUNPALIS19T harness, the purple wire that is labeled for the reverse light circuit will need to be connected to a wire on the vehicle side connector that you plug the harness into. It looks like the wire should be yellow with a black tracer but you will want to verify that you have the correct wire with a Test Light # PTW2993 as it can change on vehicles. Once you have verified that you...
    view full answer...
  • Installing a Brake Controller Onto a 2015 Jeep Cherokee With Aftermarket 4-way and 7-way Installed
    I can help you finish up the installation of your brake controller on your 2015 Jeep Cherokee Limited. I really like the Tekonsha P3 # 90195. This brake controller is a proportional controller, which means whatever pressure you press the tow vehicles brakes it will apply the same pressure and intensity to the trailers brakes. It also has a customizable full display screen which provides you with a full error messages instead of codes that need to be deciphered. If you go with the P3 Brake...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Installing VueSmart Backup Camera On Flagstaff Trailer Pre-Wired For Furrion Backup Camera
    Thank you for your business! I have another option but there is currently not a pig tail harness that will plug into the Furrion pre-wired connector on your Flagstaff Trailer to install your new VueSMART RV and Trailer Backup Camera # HM34FR. Instead of using the included butt connectors, I recommend using two of the Quick Splices # SWC502905-1 which will allow you to connect the wiring behind the Furrion connector and will not require you to cut it off as the splice will slide over the...
    view full answer...
  • Tow Vehicle Brake Lights Only Work With Manual Override On Brake Controller
    That is certainly an odd issue you are having with your brake controller but I can't say I know exactly what problem is causing this. The only thing I can think of is possibly a fault on the stop light switch circuit connection or a bad stop light switch all together. I know you said you checked the connections but what I recommend you do is make a new splice into the stop light switch circuit which is the red wire coming from the back of the brake controller. In order to do this you will...
    view full answer...
  • Parts Needed To Add 5-Way Connector To Power Lights For Headache Rack On 2020 Ram 3500
    I have an option for you, but there is not a 5-way connector that is custom fit for your 2020 Ram 3500 and will allow to also hook up a trailer. I recommend using the Hopkins Wiring Harness with 5-Pole Flat Trailer Connector - Vehicle End - 5' Long Item # HM37908, and if it is not long enough to reach from the back of your truck to the headache rack you can add Bonded 4 Wire # 16-4B-1 and Primary Wire # 16-1-1 which are sold by the foot, to give you extra length. If you need to extend...
    view full answer...
  • Where to Connect the Stoplight Wire on Brake Controller Pigtail
    To install the Tekonsha PowerTrac Brake Controller # 39523 in your 2006 Ford Escape, the red wire on your brake controller harness # 20127 needs to be connected to the stoplight switch under the dash in your vehicle. There should be a wire for the stoplight switch on the back of the brake pedal. You will want to use a circuit tester, like # PTW2993, to find the wire that has signal only when the brake pedal is depressed. Testing the wires is the best way to be sure which wire is the one...
    view full answer...
    Image 1 for
  • Brake Controller Install on 2007 Jeep Commander with Factory Tow Package
    Although your 2007 Jeep Commander is equipped with the Mopar tow package, it isn't fully wired with a plug-and-play connector under the dash. Jeep ran the brake controller output wire from the 7-way up into the passenger compartment, look for a coiled up blue or light green bare-ended wire near the top of the e-brake pedal. To complete wiring the controller, you'll need the # 5506 kit which includes the wire, hardware and circuit breakers necessary to complete the installation. You'll...
    view full answer...
  • Tekonsha Vehicle Wiring Harness For a 1996 Ford Explorer With Factory Trailer Wiring
    The Tekonsha Tow Package Wiring Harness # 118241 for your 1996 Ford Explorer will have 4 pins located inside the connector. The 4 pins are located on the side with the pin that is located a 3 o'clock from the connector. These pins will control both turn signals, brake lights and the trailer running lights, they do not have points for the license plate lights as well. You will not be able to move the connectors around as they would have to share 2 of the same pins. First be sure that you...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Availability of 4-Way Wishbone Wiring Harness with Shorter Wire Lead
    The wishbone harness with the shortest amount of wire lead has 20 feet of wire and a 30 inch ground wire, the Optronics 20 Foot Wishbone 4-Way Trailer Wiring Harness # A20WB. I wish we had a shorter option for you but our manufacturers don't offer a wishbone harness with a shorter lead. I double checked with Optronics and the 20 ft lead is the shortest they offer with a wishbone harness. If you'd rather use a connector with a shorter lead, the connector with a lead closest to the 18 inches...
    view full answer...
  • Wiring Needed To Install A Curt Echo and Curt 7-Way With Backup Alarm On a 2016 Kia Sportage
    The first step will be completing the installation of the Curt Trailer Connector Adapter with Backup Alarm # C57102 on to your 2016 Kia Sportage. You will need enough 12 Gauge Wire # 12-1-1 to run from the 7-way to where you will be tapping into the battery 12 volt source. This is sold by the foot so remember to account for all the bends along your Sportage to get it to your battery source. A Deka Ring Terminal # DW05741-1 will help you to connect to your power supply. The best way to...
    view full answer...
  • How to Wire a Brake Controller to a 1998 Chevrolet Pick Up Truck
    I have attached a diagram that shows how to wire a brake controller from scratch. If your truck did not come with a 7-way trailer connector, then you will also need to use the Installation Kit, # ETBC7. Your 1998 Chevrolet Pick up will not have a plug-in style connector option for the brake controller, so it will have to be hard wired to the vehicle. There will be four wires coming from the brake controller. The white wire is the ground and that should either be attached to the negative...
    view full answer...
    Image 1 for
  • Determining Factory Wire Color Functions for Brake Controller Port on 2016 Ram 3500
    The easiest way to install your Tekonsha Prodigy P3 # 90195 is to use the Tekonsha Plug-In Wiring Adapter # 3024-P. This adapter will not require and cutting or splicing into your 2016 Ram 3500's factory wiring. If you need to hardwire install the controller, I can help you determine which wire colors carry which functions on the vehicle side brake controller installation port in your 2016 Ram 3500. Since we know which pins carry each function on the custom wiring harness # 3024-P, we...
    view full answer...
    Image 1 for Image 2 for
  • Installing a Brake Controller in 2001 Toyota Tacoma
    Based on my research, the 2001 Toyota Tacoma did not come with a factory trailer connector. However, since you already have a 4-way connector installed on your truck, you will be able to start here for your brake controller installation. I recommend the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. This is a proportional brake controller with a digital display. It will level automatically when mounted within a 360-degree vertical range. The brake controller installs in your Tacoma...
    view full answer...
  • Where to Splice Brake Light Wire From Brake Controller To Stoplight Wire
    Since your vehicle does not have a brake controller port, you will want to use a universal wiring pigtail. For example, if you have a Tekonsha brake controller, you could use a Plug-In Harness for Tekonsha and Draw-Tite Brake Controllers # 20127. You will want to use a circuit tester, like # PTW2993, to test the wires at the stoplight switch at the back of your brake pedal to find the wire that only has signal when the brake pedal is depressed. Once you have found the wire that only produces...
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this Wiring?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.