Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Low-profile utility light illuminates an interior or exterior area with bright white light. Durable polycarbonate lens and housing. Surface mount - hardware not included. Hardwired with separate ground.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Lumens are used to measure the amount of usable light that is put out by a light source. Raw lumens represent the number of lumens that the manufacturer claims the LEDs are capable of producing. It does not include the light's drive method or the amount of light lost from the lens or reflector. Effective lumens take these factors into account and represent the number of lumens that are actually produced by the complete light assembly, not just the amount of light that the diodes are capable of producing. This light has a 585 raw lumen capacity and produces 386 effective lumens.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Optronics Submersible Thinline LED Utility Light. This is a very low-profile light that'll provide bright white light for an interior or exterior area. It is sonically sealed waterproof housing and lens that is submersible. Uses white LEDs with a clear lens, and LEDs make great replacements for incandescent lights because they last about 50 times longer. They're more efficient which they'll provide brighter light with less power output, and again, there's no bulbs to replace or no brittle filaments. The lens is a nice polycarbonate lens and housing.
If you notice in the back, it has a two-wire pigtail that includes both the power lead and the ground wire. The length of the pigtail's about six inches. This is designed to mount on the surface of your trailer. It has two mounting holes on each end. Now, the hardware to mount it is not included.A few specs on this.
The number of diodes is nine diodes. The effective lumen output is 386 lumens. Raw lumen output is 450 lumens. Power draw on this light is 12.8 volts and 0.22 amps. The wire gauge on the pigtail wires is 18 gauge, and I do want to give you some of the measurements and then we're going to hook it up just to show you how bright it is.
Basically, the overall length from the very edge to the very edge is going to be right at 12 5/8 inches long. Overall height on it is right at one inch, and then the thickness of it is right at 7/16 of an inch. The distance between the mounting holes, there's a mounting hole there and one there, center to center on the mounting holes is going to be right at 11 3/4 inches.What I'm going to do is we're going to hook the two pigtails up. The whites are ground. The black is your power.
We're going to go ahead and hook the power up. And then we're going to go ahead and hook the ground up. And with them both hooked up, we're going to go ahead and first, we're going to turn on the 12 volt power and see the light light up. Then we're going to go ahead and turn off the overhead lamps. There you go, and you can see nine diodes gives you very bright white light, lights up a very large area. Very low profile. We'll go ahead and turn back on the overhead lights. Go ahead and detach it.That should do it for the review on Optronics Submersible Thinline LED Utility Light.
Average Customer Rating: 4.9 out of 5 stars (74 Customer Reviews)
Low-profile utility light illuminates an interior or exterior area with bright white light. Durable polycarbonate lens and housing. Surface mount - hardware not included. Hardwired with separate ground.Paul, This is my first purchase with etrailer.com. The product was as described in the advertisement including good quality and correct specifications. It also came shipped undamaged and within a few business days. Its good to know there are companies still out there such as yours who care if they get repeat customers. Thanks, Terry S.
28 foot enclosed with 7 UCL59CB lights went from dark to bright. Slim design with a mounting screw hole at each end.
Fast shipping, easy install and works as expected.
I installed 2 of these inside a cargo trailer to replace the incandescent lights that no longer worked.
They work good so far.
Very bright light. I used it to illuminate an enclosed work trailer.
Great white led light, perfect balance of light versus draw, on the bench it pulled .34 amp which is exactly what I needed.
George
7/13/2024
I like these very much, they sure light up the interior of my enclosed trailer!
Love this light
Great product
These have been the perfect backup lamps, to use with my Optronics ThinLine red LED tail/signal lights. They are bright enough to light up the area behind the RV very well when backing up. Very pleased with them, and would highly recommend.
I purchased two of these LED Utility Light Bars and installed under the bed rail in my pickup bed in order to light up the bed area at night. The lights were easy to install along with the chrome base mounting bracket. Looks great and supplies ample lighting in the bed area. I liked the overall length which spread the light over a large area.
I installed a pair of these lights on underside of the overhang on my 5th wheel camper. They make hooking up easier as well as provide a lot of light for parking bicycles or motorcycles under the camper. Easy electrical hook up. I applied a bead of silicone RTV around the lights to prevent rain or wash water from getting inside the camper skin.
installed today looking forward to seeing it in the dark.....I would only recommend that ETRAILER put together a DYI package verses having to source all the little things needed to install....just saying
I attached 2 of these on the back of my boat trailer. I thought they would be a little brighter than they were. Also after 3 trips to the lake,I noticed one of them had water in it. They weren't sealed very well.
I added these as some back-up lights on my trailer. I got them because they match the existing taillights as far as size and they have a clear lens. They work pretty well but I wish they were a little brighter.
Do you have a question about this Work Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brad W.
3/15/2020
With 1000s of hrs loged , still burning bright every day with not 1 issue...