bing tracking image

Filter Questions and Answers:

reset filter
Bumper
Bumper
 

Expert Answers about Dodge Bumper


  • What is the Difference Between the Towable and Non-Towable Bumper on a 2002 Toyota Tundra
  • The difference between a 2000 Toyota Tundra with a towable bumper and a non-towable bumper is that the model with the towable bumper will have a cutout in the center of the bumper for a hitch ball wheres the model with the non-towable bumper will not have a cutout in the center of the bumper for a hitch ball. The trailer hitch receiver I recommend for your Tundra is the Curt Trailer Hitch Receiver part # 13184 because it will fit models both with the towable bumper and models with the...
    view full answer...

  • Will Curt Trailer Hitch C11367 Deform the Bumper Fascia of 2015 BMW 435i
  • You are correct that when the Curt Trailer Hitch Receiver Class I # C11367 is installed, it will move the steel bumper closer to the bumper fascia by the width of the mounting bracket. However, this will not negatively impact or deform the bumper fascia. If installing the hitch caused problems at the bumper fascia, the manufacturer would state that the hitch requires trimming of the bumper fascia or they would not list the hitch as a fit for the vehicle. The # C11367 requires no trimming...
    view full answer...

  • Cargo Carrier Recommendation For A Keystone Outback With A Recessed Bumper
  • Since you have a recessed bumper on your Keystone Outback, instead of using the 24x60 etrailer Cargo Carrier for RV Bumper # e99049 I recommend going with the: -24x40 etrailer Cargo Carrier for RV Bumper # e99050. This cargo carrier will work better for a recessed bumper since it mounts to the side of the bumper rather than the top of the bumper.
    view full answer...

  • Will Curt Bumper Brackets Fit Any Bumper?
  • The Curt Bumper Brackets # C19748 are a universal fit so you do not have to have a special type of bumper. All that is required is a flat metal section of your vehicle's bumper to install the brackets. You can then tow it with Curt tow bar # C19745. I've added a link to a video review of the brackets for you to take a look at.
    view full answer...

  • Which Westin Perfect Match Series Replacement Step Bumpers Fit a 2003 Dodge Ram
  • The photo of the black bumper for the 2003 Dodge Ram is a typical photo meant to convey the basic features of the black bumpers. The actual bumper for your truck will be the chrome one. The Perfect match bumpers are designed to perfectly match the original bumpers from the factory.
    view full answer...

  • RV Bumper Hitch That Fits A 4" x 4" Bumper
  • The Curt RV Bumper Hitch # C19101 you mentioned is designed to fit 2" x 4" RV bumpers, and will unfortunately not fit your 4" x 4" bumper. Instead, you're going to want to use the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 which will fit your 4" x 4" RV bumper.
    view full answer...

  • Class V Trailer Hitch for 1972 Ford F250 with Barden Bumper
  • I am unfamiliar with the Barden Bumper and in my research, I could not find any specific information regarding the Barden Bumper. Our trailer hitches are not tested with aftermarket bumpers. We have two bumpers that have been determined to be a fit for your truck with a factory bumper. The # BWHDRH25122 is for standard and step bumpers and the # BWHDRH25198 is for deep drop bumpers. I recommend measuring from your frame to the bottom of your bumper to know how much distance you will need...
    view full answer...

  • Can I Mount Swagman RV Bumper 2 Bike Rack # S80500 to Square Bumper on 2010 Puma Travel Trailer
  • The item you selected, Swagman RV Bumper 2 Bike Rack # S80501, is designed to attach to a 4 to 4-1/2 inch continuous welded square steel bumper like the bumper on your 2010 Puma travel trailer. It is not designed to attach to C-channel bumpers. You will want to check the owners manual of your Puma travel trailer for load carrying capacities of the camper and the rear bumper. I have linked instructions for the Swagman RV Bumper 2 Bike Rack # S80501. Also linked is an FAQ on bike racks...
    view full answer...

  • Can a Trailer Hitch be Installed on a 2006 Dodge Ram 2500 with Ranch Hand Bumper Installed
  • If the ranch hand bumper is the same thing as a cowboy bumper or deep drop bumper then none of the hitches for the 2006 Dodge Ram 2500 are confirmed to fit because they are not tested on truck models with alternate bumpers. You would have to put the old bumper back on. If the factory hitch is the one welded to the frame then you would need # C15809 if you did install the factory bumper. This hitch fits below the factory hitch. I have linked instructions and a video showing installation...
    view full answer...

  • Bumper for 2006 Ford E-350 Van
  • We do have bumpers that are a fit for your 2006 Ford E-350, though they are replacement bumpers, as opposed to dock bumpers. These replacement bumpers do have holes for trailer hitch balls like you want, and come with a mounting kit as well. The bumpers come in your choice of three colors, and I confirmed with the manufacturer these are a fit for your 2006 Ford E-350. - Silver Powder Coated Steel: Westin Fey Diamondstep Rear Bumper # 20105 - Black Powder Coated Steel: Westin Fey Diamondstep...
    view full answer...

  • How to Identify What Bumper Type My 2001 Dodge Ram 3500 DRW Has to Correctly Select a Trailer Hitch
  • A roll pan bumper is a style of bumper that that will make the back of your tailgate seamlessly flow down your vehicle and give the appearance of flatness. With a roll pan bumper there is no step like a traditional bumper you see on many trucks going down the road. If you would like to send me a picture of the back of your truck I can confirm if it is a roll pan style or not for you. I have linked an image of what a deep drop bumper will look like as well as a standard step bumper for...
    view full answer...

  • Colors Available for Westin Bumper That Fits 1997 Dodge Ram
  • There is an option for a chrome bumper that fits your 1997 Dodge Ram 1500, though the Westin Fey bumper that you mentioned is only available in Silver and Black: - Silver: Westin Fey Diamondstep Rear Bumper # 20008-92240 - Black: Westin Fey Diamondstep Rear Bumper # 20009-92240 For a chrome bumper that I confirmed does fit your 1997 Ram 1500, you will need the following: - Westin Perfect Match Series Rear Step Bumper - Chrome Plated Steel # 31005 Each of these bumpers come with the...
    view full answer...

  • Will Curt Front Hitch Receiver Fit a 2013 Toyota FJ Cruiser with Expedition One WyoOtto Bumper
  • The front mount hitches we carry for your 2013 Toyota FJ Cruiser including # 31367 are designed to fit stock vehicles. But looking at pictures of the Expedition One WyoOtto bumper versus the stock bumper it does not appear that the new bumper hangs down any lower than the stock bumper. Provided that the new bumper uses the same mounting locations as the stock bumper and none extra needed by the hitch (see linked instructions) then I am confident it will fit. I have linked a video showing...
    view full answer...

  • Can The Mount-N-Lock SafetyStruts Standard RV Bumper Support Brackets Work On A 2-1/2 Bumper?
  • The Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets # MO22FR is meant to fit on bumpers at least 4" wide, but with use of the included spacer, can fit bumpers 4-1/2" wide, meaning, it is not able to work with your 2-1/2" wide bumper.
    view full answer...

  • Comparing Westin Fey Black Rear Bumpers For a 1984 Chevrolet S-10
  • Currently there are 2 black Westin Fey rear bumpers for your 1984 Chevrolet S-10 Durango. The Surestep Rear Bumper # 66001 and the Diamondstep Rear Bumper # 66000. The Bumper # 61001 is for select Dodge and Toyota trucks. The difference between your 2 bumpers for your S-10 is the diamond tread versus the surestep treads on the bumper. You will need the Custom Installation Kit # 97200 for either Bumper # 66001 or # 66000.
    view full answer...

  • Bumper Compatibility for Swagman S80605 RV Bumper Mounted 2 Bike Carrier
  • I don't have a listing of what specific bumpers the Swagman # S80605 Bumper Mount 2-Bike Carrier will fit, however you can easily determine that by examining and measuring your existing bumper. The # S80605 rack fits continuously welded steel bumpers that are 4 or 4-1/2 inches square. If the bumper is aluminum or is spot welded, the fear is that the bumper could be deformed by the force applied to it by the U-bolts that attach the rack to the bumper. If your bumper doesn't meet those...
    view full answer...

  • Is there a Bumper Mount Hitch that Will Fit a 4-3/8 Inch Bumper on an Arctic Fox Trailer
  • Bumper mount hitch # UF35-946402 is designed specifically for 4 inch square bumpers so I cannot recommend it on a 4-3/8 inch wide bumper. Hitch # BA-100 would be a better fit since it fits 4-1/2 x 4 inch bumpers. All of the other options are either going to be 4 x 2 or 4 x 4. Also check with the trailer manufacturer to make sure the bumper is rated for use with a hitch.
    view full answer...

  • Westin Fey Surestep Rear Bumper Compatibility With a 2019 Nissan Frontier
  • As the Westin Fey Surestep Rear Bumper # 61001 is a universal fit bumper with an overall length of 61-1/16". You may be able to have a shop custom fit it to your 2019 Nissan Frontier KC. There may be modifications made to the bumper to get it to fit properly. We currently do not have any custom fit rear bumpers for your Frontier and Westin does not make brackets for your Frontier to use their bumper.
    view full answer...

  • Does Bumper for 1997 Ford E250 Econoline Come With Mounting Brackets
  • The bumpers that fit your 1997 Ford E250 Econoline actually come with the brackets already welded onto the bumper so you do not need to purchase them separately; it even comes with the mounting hardware. The bumper that fits your van is the Westin Fey Diamondstep Rear Bumper, and it comes in your choice of three colors. - Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel # 20107 - Westin Fey Diamondstep Rear Bumper - Silver Powder Coated Steel # 20105 - Westin Fey Diamondstep...
    view full answer...

  • Why Does Curt Hitch C15803 Not a Confirmed Fit with Aftermarket Bumper
  • Aftermarket bumpers are different sizes and shapes compared to the factory bumpers so the hitches we offer like the part # C15803 are designed to fit and clear the factory bumpers but since the aftermarket bumpers are a different size there's not easy way to tell if the hitch would also fit with it and not interfere.
    view full answer...