bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Forest River RV and Camper Steps


  • Lippert SolidSteps for 2021 Forest River Surveyor Legend 18RBLE
  • To measure for fit of the Lippert SolidStep, measure the entry way from right to left at the narrowest point. Generally there will be a flat metal flange that extends out 1/2" all around. This is the flange that the door closes against and keeps the door from trying to swing inside. From that measurement, round up to the next even inch. So, your door (at the narrowest point) is 21-1/4" wide to the door flange, and rounded up we get 23". The narrowest width for solid steps is 24 inches....
    view full answer...

  • Will Torklift RV GlowSteps TLA7834 Fit 2017 Forest River Flagstaff Classic 832BHDS
  • To determine if you are able to replace your 3-step unit with a 4-step unit like # TLA7834, you will need to take a few measurements as RV steps are not custom to the year, make and model of a specific RV. Measure from the ground to the top of the threshold on your RV to determine how much ground clearance you have. The Torklift Steps require ground clearance between 31 and 42 inches. The mounting bracket base dimensions for the Torklift GlowSteps are 21-1/2" wide x 14-1/2" tall x...
    view full answer...

  • Do MORryde Steps StepAbove Fold-Down Steps MR58RR Require Screen Door to be Removed
  • It is possible you will have to remove your screen door in order to use the MORryde StepAbove Fold-Down Steps for 21-3/4" to 22-1/4" RV Door Frames # MR58RR. The answer just depends on the gap you have between the bottom of your screen door and your threshold. As you can see by the cut out I added from MORryde, you will need a gap of at least 3/8" between the bottom of your door and threshold in order for the steps to work for you. I have added a link below to the installation instructions...
    view full answer...

  • How to Determine Correct Lippert SolidStep Replacement for Trailer
  • I can help you find the correct Lippert SolidStep for your RV, and it will just take a few measurements. What you need to do is measure your doorway width and your entry height to ensure you get the right replacement SolidStep. For example, the SolidStep Manual Fold-Down Steps # LC791572 are for a doorway width between 26" and 29-7/8" and for an entry height of between 27" and 36". Or the SolidStep Manual Fold-Down Steps # LC791573 are for doorways between 30" and 36" wide...
    view full answer...

  • MORryde StepAbove RV Steps Modification or Replacement
  • After doing some research I was unable to find a way to safely modify your MORryde StepAbove RV Steps with Strut Assist - 23-3/4" to 24-1/4" Wide Doorways - 3 Steps # MR45RR. We do have the MORryde StepAbove RV Steps with Strut Assist - 23-3/4" to 24-1/4" Wide Doorways - 4 Steps # MR75RR which would change the steps to 8" apart. The thing you would want to watch with the 4 step would be ground clearance. The 3 step is a threshold-to-ground height between 31-1/2" and 37-1/2" and the 4 step...
    view full answer...

  • Correct Replacement Control Module for Lippert Coach Step 164194
  • I reached out to the manufacturer, Lippert, about the problems you were having and they told me the issue is your control module on the Kwikee 25 Series # LC3658373 being the wrong one. They said (rather bluntly): "You cannot use a Kwikee controller on a Coach step. The correct part number is 301702." So to remedy this issue what you need is the Replacement Control Module for Lippert Electric Coach Step # LC301702. I have added a link to a video review of this part for you to...
    view full answer...

  • TLA8103 Fitment on my 2018 Forest River Salem Cruise Lite 263BHXL
  • Yes the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear part # TLA8103 will work out well for you. Your entry height is right at the minimum meaning you will have shorter steps which is what you are looking for. You are likely closer to the 28-30" range because they go from the bottom of the door rather than the top of the step bracket itself. . They are also quite easy to operate when compared to a standard steel step. I have linked a video for you on them to check out if...
    view full answer...

  • Replacement Gear and Parts for Original Lippert 3 Step on 2008 Forest River Georgetown 373
  • For the replacement gear you will use the Replacement Entry Step Gear for Lippert Kwikee 25 and 26 Series Triple Steps # LC369354. I believe the shear pin you are referring to is a part of the gear itself. The motor is # LC369506 which comes with the smaller gear. If you want to replace the entire assembly you can use the Lippert Components Kwikee Step Replacement Kit # LC379804.
    view full answer...

  • Pull Out Triple Step Setup for Forest River Rockwood
  • The mounting bracket width of the Triple Flexco Manual Pull-Out Steps # SMFP-3100 is 28-1/8 inches. If your bracket with is 27 inches you'd need to have them removed and install wider outriggers with the part # LC301704. If you need a narrower step setup overall the # LC432696 is 27-1/2 inches or the Torklift GlowStep part # TLA8103 is 25-1/2 inches overall in width.
    view full answer...

  • Which Torklift GlowStep Should be Used on 2018 Forest River Rockwood Roo 23IKSS
  • Your threshold height of 33-3/4 inches is perfect for the TorkLift GlowStep 3-Step part # TLA8003 which is designed tow work with the threshold height range of 25-1/2 inch to 36 inch.
    view full answer...

  • Replacement Steps for Flagstaff Super Lite 8538BHWS
  • In the review video (3:25 minute mark) the bracket attached to the step measures just over 27-1/2". The bracket on your trailer should be getting close to 28" wide to make that work. It seems like a lot of work, but you might also consider taking the trailer mounting frame off and using the Lippert # LC301704 metal outriggers in thier place. Since the trailer mounting brackets are 27" you will need steps that are smaller that that. Finally, the simpilest solution would be the...
    view full answer...

  • Fold Down Steps For a 2013 Forset River Rockwood Signature Ultra Lite 8281WS
  • From my research and experience installing steps on fifth wheel campers your 2013 Forest River Rockwood Signature Ultra Lite Fifth Wheel the door opening should be 30" to 36". If I am correct I recommend SolidStep Manual Fold-Down Steps for 30" to 36" Wide RV Door Frames - Quad - Aluminum Item # LC791575. Most fifth wheel campers sit a little higher. Having the fourth step ensures the bottom step is not too far from the ground. The steps have adjustable legs for un-level terrain so you...
    view full answer...

  • Availability of Flexco RV Manual Pull Out Step that is 27 inches Wide
  • The closest Flexco steps we offer to what you mentioned are the Flexco Manual Pull Out Steps part # SMFP-3200L which are a triple step setup that are overall in width 27-1/8 inches.
    view full answer...

  • Distance from Mounting Bracket to Bottom of Hickory Springs Manual Pull-Out Step
  • When the Lippert Manual Pull-Out Step # LC432678 is in the closed position, or with the step pushed in it measures 6-3/4 inches from where it mounts to the very bottom of it, and then when open it measures 8-1/4 inches.
    view full answer...

  • Recommended Double Step Assembly to Replace Single Step Flexco on 2017 Forest River Trailer
  • To replace the single step Flexco step assembly on your Forest River Wolf Pup 16BHS Trailer, I recommend taking a look at the Flexco Manual Pull-Out Steps # SMFP-2100. This double step assembly features 9 inch deep, pull-out steps with a non-slip surface to provide sure footing. It has a mounting base that measures 26-1/8 inches wide and 8 inches deep (and a bolt hole pattern of 24-1/2 inches wide and 7 inches deep). I recommend comparing these dimensions to your current assembly to verify...
    view full answer...

  • Recommended Low Rise Step for 2005 Forest River Rockwood 28 Foot Trailer
  • The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375 lbs - Black Bracket # TLA7833 is the closest option we have to what you are seeking. The steps have a 7-1/2 inch rise with steps that are 20 inches by 8 inches. The overall width is 21-1/2" wide x 12-1/2" tall x 8-1/2" deep. It has leveling feet to help with uneven ground. If you need a smaller width, the only option we have is the Brophy Scissor Step # SS03 in black or # AS03 in aluminum. These are 17...
    view full answer...

  • Recommended Lippert Solid Step for a 2019 Forest River Ultra Lite 2604WS
  • I was able to determine that your 2019 Forest River Ultra Lite 2604ws has a 30 inch door. If you have the factory height threshold then the SolidStep Manual Fold-Down Steps # LC791572 is most likely what you want. This has a threshold height of 27-36 inches and is what most people are using. If you have a threshold between 35 and 44 inches, then you will want to consider the quad step # LC791575 instead.
    view full answer...

  • Could TorkLift GlowStep Revolution Steps # TLA8004 Easily Install 2017 Forest River Windjammer
  • The TorkLift GlowStep Revolution Scissor Steps # TLA8004 that you referenced are designed to fit the standard RV step areas with the bracket kit part # TLA8022. There will most likely be some drilling though since these do install in a slightly different way that standard steps. The feet of the steps are adjustable in height pretty easily so if you somehow ended up on unlevel ground enough to call for it you could adjust the feet. In general most campsites are level enough for these...
    view full answer...

  • Lippert Replacement Step for 2015 Forest River Sunseeker
  • For your 2015 Forest River Sunseeker, the 163033 you referenced is a 4 inch wide single coach step. You can simply swap out that step for the Lippert Electric Tread Lite Step for RVs - Single - 5" Drop/Rise - 24" Wide - Aluminum # LC353542 you referenced. The mounting bracket dimensions are 25-5/8" wide x 6" tall x 18" deep. It will use Mounting Hardware for Lippert Electric and Manual RV Steps # LC118155-72.
    view full answer...

  • How to Install Wider RV Triple Steps In Place of Double Steps
  • The triple steps are a bit wider than the double steps so while we don't have a set narrow enough to fit the brackets you have you could use the triple step part # SMFP-3100 which has 8 inches of drop between the steps. With them you'll need to replace the mounting brackets with the outriggers # LC301704.
    view full answer...

  • Determining Which RV Steps Will Fit 2008 Forest River Cardinal LE 5th Wheel Trailer
  • I would be happy to help you determine if 4 step RV steps will fit your 2008 Forest River Cardinal LE 5th wheel trailer, but I will need to know the entry height of your RV and the width and depth of the space underneath the doorway. The entry height of your RV is measured from the top edge of the mounting location to the ground while on a level surface as shown in the included picture. For example the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 27-1/2"...
    view full answer...

  • Recommended Steps for a 2012 Rockwood Mini Lite
  • I do have a solution for you, but the closest thing that we have to what you are describing is the SolidStep Manual Fold-Down Steps # LC698799. This would be compatible with your door width but is only compatible with a threshold range of 27" - 36" from the ground. For your application I recommend going with the Lippert Pull-Out Steps # LC432696. These are some of the most popular steps that we have to offer and are made for a threshold height of about 24-1/4" so it's right near your...
    view full answer...

  • Are New Mounting Brackets Required to Install Double Step on RV in Place of Single Step
  • The single step RV steps do have smaller mounting dimensions so if you are wanting to go with a double step to replace what you have what you'd need is the Lippert Manual Pull-Out Steps # LC432682 which is a double step that has a foot plate that provides solid traction. Since the mounting brackets of your RV are going to be too small you'll need outriggers too to go with this as part # LC301704 and you'll be set.
    view full answer...

  • Will Outriggers SM-01 Allow Hickory Springs Pull Out Steps to Fit RV with Larger Mounting Brackets
  • The Outriggers part # LC301704 are compatible with the all electric or manual pullout steps like # LC432678 that you referenced. You may need to remove your old brackets to install the Outriggers in place of them and you'll be set.
    view full answer...

  • Replacement Steps for Lippert 216945 Steps
  • I spoke with my contact at Lippert who informed me that the 216945 that you referenced is no longer sold but there are replacement steps for you. The Kwikee 25 Series Steps # LC3658373 will replace your steps directly. They have a rise of 8" and a run of 9" with a weight capacity of 300 lbs. My contact at Lippert confirmed this is the replacement that you need.
    view full answer...

  • TorkLift GlowStep Revolution Compatibility with Rockwood Roo 23bds
  • The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8003 is designed for entry height between 25-1/2 and 36 inches. This is to the door threshold not the bottom of the compartment. If that is the case, then it will be a great option for you and the step can be used without the landing gear down, just be aware that the RV may rock and tilt as you move. The steps will adjust fine but the vehicle movement could throw you off balance, so you would just need to be careful. You...
    view full answer...

  • Will the SolidStep Manual Fold-Down Steps Fit a 29 Wide Doorway
  • Yes, the SolidStep Manual Fold-Down Steps # LC791575 are compatible with doorway widths of 28" - 30" so they will work great for your application. Attached is a review video for you to check out.
    view full answer...

  • MORryde StepAbove RV Steps Door Rubs Upon Closing 2019 Prime Time Avenger
  • Verify the distance from the threshold to the front of the StepAbove hinge plate it should be 15/16". There should also be 1/8" clearance between the inside lip on the door jamb and the outside edge of the step on each side. Check to make sure when the steps are out the extension feet aren't out too far keeping the hinged plate across the threshold up. That could cause the door not to shut. Additionally you may need to adjust the length of your steps using the adjustable ends. Make...
    view full answer...

  • Lippert SolidStep 4 Step on 2008 Forest River Cardinal 36SB 5th Wheel
  • There are several sizes of the Lippert SolidStep Manual Fold-Down RV Steps so I suggest you measure your Cardinal's doorway width just to be safe. The step # LC791574 is a 4-step unit that will work for your 40-inch ground-to-threshold height. It fits RV doorways with a width of 29.5-inches. All SolidStep units are shown on the page linked for you. Lippert recommends measuring the inside width of the door frame and rounding up to the nearest even number.
    view full answer...

  • Replacement Steps For Wolf Pup Travel Trailer
  • The Wolf Pups sit pretty close to the ground. You are likely at the cusp of 2 steps is not enough and three steps may be too many. To measure for replacement steps, first measure the "entry height" which is the height from the ground to the top of the steps mounting flange. Then measure the inside width of the bracket that holds the steps. If the inside width of your steps mounting bracket is 25-1/2", and your entry height is 18-1/2" to 28", then the TorkLift # TLA8003 will be a good...
    view full answer...

  • Replacement Power Step Recommendation for Replacing Steps Marked 725-0023
  • The replacement step we have that matches the part number you listed of 725-0023 is the Lippert Kwikee 32 Step part LC3722617 which has step dimensions that are 24 inches wide and mounting bracket dimension of 11-3/8 inches deep. The drop between the steps is 8 inches. I attached a picture of what these steps look like for you to compare to what you have as well. I looked up your order notes and you ordered the 34 Series steps part # LC3722862 which is considerable wider at 30 inches...
    view full answer...

  • Lippert SolidSteps Recommendation for 2014 Forest River Flagstaff V-Lite
  • The Lippert SolidSteps like the part # LC678028 are universal enough for RV doors that you really only have to make sure you have the correct kit based on the door width. The # LC678028 is for 28 inch to 30 inch wide doors like what would fit your RV since it has a 28 inch wide opening. The hinge width has already been taken into consideration. I attached a picture that shows the vertical height too though incase you want to compare the measurements to your RV. The second pictures...
    view full answer...

  • Which MORryde Stepabove Fits Doorway Width of 28 inch and Height of 39 inch
  • Based on your door way width and the height of your door from the ground being 39 inches the correct MORryde Stepabove is the part # MR85RR that you referenced. This fits the entry door height range of 36-1/2 inch to 42-1/2 inch so your 39 inch doorway height would work great.
    view full answer...

  • Can You Upgrade From 2 to 3 Steps On a 2021 Forest River Ozark Travel Trailer
  • In order to confirm fit of a set of pull-out steps you'll need to know the width of the step mounting brackets already on the trailer and the entry height which is the distance from the bracket to the ground. The Alumi-Tread Manual Pull-Out Step for RVs part # LC432696 for example fit a 27-1/2" wide mounting bracket and 24-1/2" entry height. I have attached a full list of our three steps options below if the above don't match up.
    view full answer...

  • How To Determine Which GlowStep Revolution Steps Will Fit A 2017 Forest River Rockwood Mini Lite TT
  • Correct, the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step # TL32SR is the right size for your 25-1/2" wide doorway. However, you'll also need to verify your entry height as well. You'll want to measure from the mounting point to the ground, and use the chart I've attached to verify the correct steps for your 2017 Forest River Rockwood Mini Lite.
    view full answer...

  • Replacement Steps for 2017 Forest River Sale Cruise Lite 171RBXL
  • The TorkLift Glow Step Revolution # TLA8102 are designed to work as a universal replacement option, and won't be coach specific. Additionally, we do not have information that tells us what steps fit on different coaches, so you will want to measure the entry height from the mounting spot to the ground as well as the dimensions of the area the steps would be mounted. The # TLA8102 are designed to work on coaches that have 18-1/2" - 28" entry heights and requires a 25-1/2" bracket; the...
    view full answer...

  • Kwikee Power Step for Rockwood Ultralight 2905WS
  • I looked up your Rockwood Ultralight 2905WS and found that it normally has a triple step setup so for a Kwikee power step that would work great we have the 23 Series part # LC3694042.
    view full answer...

  • Will the SolidStep Manual Fold-Down Steps Work On a Cardinal 5th Wheel With Step-Up
  • I do have an option but the only way to confirm fit of the SolidStep Manual Fold-Down Steps like part # LC698799 on a trailer with a step-up directly behind the door would be to test fit. I don't think fit would be able to be accurately determined beforehand by measuring. There is a bracket which positions the bulk of the step up from the door sill but it could still not be enough to overcome the step-up. Instead, I think a much better option would be the TorkLift GlowStep Revolution...
    view full answer...

  • Converting 2010 Coleman Niagara Single Step to Double Step
  • For your 2010 Coleman Niagara, the dimensions you gave are a big help. There isn't a perfect fit for the current setup, so you will need to use what is called an outrigger. You can use the Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 20" Wide - 300 lbs # SMFP-2120 along with the Lippert Outriggers for Manual and Electric RV Steps # LC301704 to give you the correct fit and stability. You will use hardware # LC118155-72 to make them compatible. Note--You may use...
    view full answer...

  • Triple Steps that Can Fit 2010 Forest River Georgetown
  • The great thing about RV steps like the triple step part # LC432690 is that they are universal enough in how they install that they can basically be made to fit any RV including your 2010 Forest River Georgetown. At worst you might have to move the mounting hardware you have now or have these steps welded in place but they will fit your motorhome. If you wanted to install new mounting brackets you'd then need the part # LC301704.
    view full answer...

  • Recommended Single Manual Entry Step for a 2018 Forest River Forester 2291S Motorhome
  • We do have some bolt-on manual steps that you can install on your 2018 Forest River Forester Motorhome to make it a little easier entering and exiting your motorhome. Out of the linked selection I recommend going with the Flexco Manual Pull-Out Step # SMFP-1220 which has a drop/rise of 3" and measures 21" wide x 8" deep. This is proudly made in the USA, comes with a 1-year warranty, and can be bolted or welded on depending on your preference. Attached is a review video for you to check...
    view full answer...

  • Recommendation For 3-Step Unit That Fits 25 1/4" Mount On 2018 Forest River Flagstaff Camper
  • I contacted the manufacturers of steps and unfortunately no one has a 3-Step option that fits your 25-1/4 inch mount on your 2018 Forest River at this time. Most 3-Step options have different mount sizes with 27-1/2 inch being the more common sizing. I have attached a link to our 3-Step inventory department. I do have a 3-step scissor option by Torklift that is Item # TLA8103 that is close but it's mounting dimensions are 25-7/16 inch wide by 12 inch deep. Additional information...
    view full answer...

  • What Kind of Hardware is Needed to Install Lippert SolidStep # LC791572
  • To install the Lippert SolidStep # LC791572 you will need to use two #10, 1-1/2 inch self-tapping screws (for a laminate floor) or two #10 - 1-1/2 inch wood screws (for a wood floor). After they are installed you will check the alignment and functionality of the steps and make any adjustments. Once that is done you will need 8 additional screws of the same type and size as used before to complete the installation of the steps.
    view full answer...

  • Replacement 3-Step for 2018 Forest River Wildwood X-Lite Travel Trailer
  • We have the 3 step TorkLift GlowStep Revolution scissor steps with landing gear, # TLA8103 that has mounting bracket dimensions of 25-1/2" wide x 13-7/8" deep. What I really like about this option is that the landing gear creates a stable connection from the bottom step to the ground. It has adjustable legs that help to stabilize the stairs when on uneven terrain. There is a release lever that lets you quickly and easily deploy steps when ready and the lever secures with included bail...
    view full answer...

  • RV Steps for a 2016 Forest River Vengeance for a Width of 27-1/2"
  • The steps that I recommend are the SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames # LC791572. These manually operated RV steps make it easy to get into and out of your 5th wheel, they simply fold down for use and fold back up for travel. The leg extensions create a sturdy connection with the ground to eliminate bounce to reduce the potential for slipping or falling during use. They remain stable on uneven terrain since the legs adjust individually to keep the steps parallel. These...
    view full answer...

  • Lippert SolidStep Fold Down Step for 2006 Forest River Surveyor SV 303
  • Since your doorway is 24 inches wide and the threshold is 31-1/2 inches from the ground the correct Lippert SolidStep is the part # LC698799 which is a triple step. A four step version of this would be too tall to fit properly so the triple step is the way to go.
    view full answer...

  • Could Flexco Triple Pull Out Step Fit 2015 Forest River Cherokee 16BHS Camper Trailer
  • The Flexco Manual Pull-Out Steps for RVs # SMFP-3100 that you referenced can be made to fit your camper as you can always weld these in place of what you currently have or have the current brackets moved. Single steps typically have much narrower mounting brackets that triple steps. This should put the third step right near the ground though. I attached a review video for these steps for you to check out as well.
    view full answer...

  • Replacement Pull Out Steps for 2019 Forest River HW27K
  • I looked up picture of your 2019 Forest River HW27K and it appears to have a pull out single or double step so for a replacement the Flexco Manual pull out steps part # SMFP-2100 would work great.
    view full answer...

  • Could Econo Porch Trailer Step w/ 2 Handrails # EHS-103-R-HR be Used as Left Hand Rail Only
  • The Econo Porch Trailer Step w/ 2 Handrails and Landing # EHS-103-R-HR that you referenced is a 4-step RV step that comes with a handle for both the left hand and right hand side. If you wanted to leave off either the right or the left you certainly could.
    view full answer...

  • Which Torklift GlowStep Revolution for 2016 Forest River Wildwood Heritage
  • The Torklift GlowStep Revolution part # TLA8004 is the correct set for your 2016 Forest River Wildwood Heritage based on your threshold height. If your current brackets are not compatible I would recommend removing what you have and installing the part # LC301704 in place of them and you'd be set.
    view full answer...

  • Will Econo Porch Trailer Step # EHS-103-R Fit Over Existing Steps on Arctic Wolf 5th Wheel Trailer
  • There are a couple of support straps at the top step/landing that would likely be in the way and prevent Econo Porch Trailer Step # EHS-103-R from fitting around your existing steps. The height from the ground to the top step is 27-1/2 inches. From the ground to where that strap starts is about 18-1/2 inches. If those support straps weren't there then it would most likely work.
    view full answer...

  • Replacement RV Step With Covered Motor for Winter Travel
  • The Lippert Components Kwikee 28 Series # LC3747453 only has the step that retracts to cover the motor, linkage, and control module. Although this isn't a perfect seal, it will keep the large debris out but salt will find its way in. If you don't need the 7 inch drop, we do have the 5 inch drop # LC353620 or # LC353542 which have the motor covered. You can see the measurements for these on the product page to assist with compatibility.
    view full answer...

  • How To Confirm Fit of SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames
  • The SolidStep Manual Fold-Down Steps part # LC791572 is designed for an entry threshold height between 27" - 36". It will also require an entry width between 25" - 28-7/8". Therefore, so long as you are within the range for each measurement there will not be any fit issues. It does not matter is you only clear by 1/4" just so long as you are within the range listed.
    view full answer...

  • Best SolidStep Manual Fold-Down Step for a 29 Wide Door Opening and 33 High Threshold
  • Since the SolidStep # LC791572 is designed for a RV doorway that is 26 to 29-7/8 inches wide and a threshold height that is 27" - 36" from the ground, this is the part you will want to order.
    view full answer...

  • Does 22 inch Bracket Width on RV Prevent Install of Lippert SolidStep
  • The Lippert Solidstep RV folding steps part # LC791573 do not attach to the brackets on the underside of the door so your 22 inch width bracket for pull out steps would not be an issue. As long as your doorway width is 24 inches wide and the entry height of the door is between 27 and 36 inches this will fit and work great.
    view full answer...

  • Which Torklift Stairs for Forest River XLR Nitro 5W Toy Hauler
  • What I understand is that you have a Forest River XLR Nitro 5W Toy Hauler with a 28" height from the ground to the threshold, your current steps mount within a well under the threshold that is 27" wide at mounting point; you need to replace current steps with something more stable and looking at the TorkLift option. The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear, # TLA8103, is a 3 step design for entry height of 25-1/2" to 36". These have actual step dimensions of...
    view full answer...

  • Will SolidStep Manual Fold-Down Steps Bring Water Into Trailer After Rain
  • The Lippert SolidStep Manual Fold-Down Steps # LC791572 referenced in your question is a great manually operated assembly that requires very little effort to fold down and back up for travel. After a good rain, I do recommend wiping the steps down before folding them into the camper, as it's possible that some water could be brought inside. This is the case with any fold-up style steps like these. The slight decline on the step surface will prevent a lot of water from pooling up and there...
    view full answer...

  • Fit of Lippert LC432698 Alumi-Tread RV Steps on 2011 Wildcat 302RLS 5th Wheel
  • The Lippert # LC432698 steps you mentioned are designed to replace steps with a 28 inch mount, so they'll be a good fit. The steps have an overall height of 30-3/4 inches, measured as shown in the provided photo which also shows other dimensions. You can see a product demonstration video by clicking the provided link. # LC432698 is the current model of the # 358991 RV steps.
    view full answer...

  • Replacement RV Steps w/ 8 Drop/Rise
  • I understand the need to lessen the drop/rise. If you are okay with bottom step setting close to or possibly against the ground then the Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise - 24" Wide - Quad - Aluminum, # LC432698, should work for you. Another option with an 8" drop/rise is the SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames - Triple - Aluminum, # LC791572. This has legs at the bottom of steps that are adjustable but the others have that wanted...
    view full answer...

  • Which Lippert SolidStep Fits Doorway Width of 25 inches
  • Since your doorway width is 25 inches the correct SolidStep is the part # LC791572 that you mentioned. This would work great on your Roo 21SS.
    view full answer...

  • Recommended Pull Out Step For 2011 Wildcat 302RLS With 27-5/8" Wide OEM Step
  • I do have options for you but the Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise part # LC432698 (358991 is the manufacturer part number) will not fit properly because the opening on your trailer is 28" and the frame of the steps is 28" the fit will be too snug. I recommend to use Flexco Manual Pull-Out Steps for RVs part # SMFP-2100 which is 27-5/8" wide for a perfect fit on your trailer if you want to utilize the space under the door for a pull out step. There is not a quad...
    view full answer...

  • Could Flexco Manual Single Pull Out Step part # SMFP-1100 Replace Electric Step
  • Yes, the Flexco Manual Pull-Out Step for RVs # SMFP-1100 that you referenced can replace an electric setup on your RV. The mounting brackets of this are 25 inches wide which is a very common size but worst case scenario you'd have to move the mounting brackets or use outriggers like part # LC301704. Another option is that you could weld these to your RV frame too.
    view full answer...

  • Recommended SolidStep Manual Fold-Down Steps for a 2018 Forest River Rockwood Windjammer
  • The correct set of SolidStep Manual Fold-Down Steps for a 2018 Forest River Rockwood Windjammer with 28" doorway and 36" entry height is indeed part # LC791574. This option also will give you some extra margin for the steps when parking on unlevel terrain.
    view full answer...

  • Recommended MORryde StepAbove Steps For RV With 28-1/4" Doorframe Width and 35-1/2" Entry Height
  • We have exactly what you are looking for. You will need the MORryde StepAbove RV Steps # MR78RR which are designed for doorways that are 7-3/4" to 30-1/4" wide which is perfect for your 28-1/4" internal doorframe opening, and is designed for entry heights of 34" - 36" which is exactly what you need with your 35-1/2" entry height. These have a 400lb capacity making them pretty heavy duty, and the adjustable legs allow you to make sure the steps are level and secure even when you are...
    view full answer...

  • How do I Determine What Replacement Steps Fit My Flagstaff 5th-Wheel Trailer?
  • When you mention "concertina" steps, I am assuming you mean scissoring steps with the bottom hinges. If this is the case, there are a few critical considerations that determine what steps you need for your Flagstaff Super Lite 5th-Wheel 529IKR. The first consideration is how many steps you are looking for. Different models have different numbers of steps involved. As for the measurements, the two main measurements we need to know is the entryway height (the measurement of the bottom...
    view full answer...