bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Grand Design RV and Camper Steps


  • TorkLift Glowstep Revolution Size Selection
  • Since you have the 27" wide entryway, the only additional thing we need to know is the "Entry Height." The attached photo will show you how to measure from the top mounting point to the ground. From there use the attached chart. For instance if your entry height was 38" high, then you would use # TLA8004. Watch this though: If your entry height was 36" then you could use # TLA8004 or # TLA8003. The steps for taller entryways will extend out further. The steps for shorter entryways...
    view full answer...

  • Torklift Replacement Steps for Grand Design Reflection 5th Wheel Including 303RLS
  • The Torklift # TLA8003 (3 Steps) will fit for your trailer. These are intended for a mounting bracket measuring 27-1/2" and an entry height of 25-1/2" to 36". Alternatively, the Torklift # TLA8004 (4 Steps) is designed for an entry height of 32-1/2" to 44" and will extend out further. If you have trouble on steps I would recommend the 4-step model, just know that they extend out further, otherwise the 3-step model is fine. Also check out the Torklift # TLA7621 Hand rail. 4 steps...
    view full answer...

  • What MORryde Steps Will Fit On My 2016 Grand Design Reflection 5th Wheel.
  • To get the four steps you need the MORryde StepAbove Strut Assist Fold-Down Step for 27-3/4" - 28-1/4" RV Door Frame - Quad # MR85RR is the way to go. The legs are adjustable and they have foot pads that move independently to give you stability on uneven surfaces.
    view full answer...

  • SolidStep Manual Fold-Down Steps for 2018 Grand Design Reflection 311BHS
  • The how to measure height is rather straight forward and you do not need to be concerned about exact measurement. With your RV situated on a level setting and arranged the way you would typically have it when in use, measure the height from ground to the threshold. If your measurement is between 35" and 44" then you will want the four step model. For a four step Lippert SolidStep for your 2021 Grand Design Reflection 311BHS, I suggest the SolidStep Manual Fold-Down Steps for 29" to 36"...
    view full answer...

  • How To Find the Correct SolidStep Manual Fold-Down Steps for a 2014 Grand Design Solitude 369RL
  • I am sure we have a set of the SolidStep Manual Fold-Down Steps for a 2014 Grand Design Solitude 369RL but I will need measurements in order to confirm fit. The measurements required to confirm fit will be the inside width of the doorway as well as the height of the doorway. For example, the SolidStep Manual Fold-Down Steps part # LC791574 fit a doorway width from 26"-30" and a doorway height from 27"-36". I have attached a photo for you of the needed measurements as well as the list...
    view full answer...

  • TorkLift GlowStep Revolution Steps for a 2019/2020 Grand Design Reflection 337 5th Wheel Camper
  • Yes, the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 is what you'll want for a 2019/2020 Grand Design Reflection 337 5th wheel camper. I confirmed this with TorkLift and also attached a review video for you to check out.
    view full answer...

  • Which TorkLift Revolution Steps Do I Need for a Grand Design Reflection Fifth Wheel 303RLS
  • Generally speaking, it is not exactly possible to pick out replacement steps for a trailer without having the trailer present to measure the entry height and mounting bracket flange width. However, as we have such a great relationship with our customers they are always coming back to us to let us know what works and what doesn't. I took a look at some of the reviews for the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear part # TLA8004 and it looks like these are the exact ones...
    view full answer...

  • Recommended RV Entry Step That Can Have Steps Added As Needed
  • I may have a solution for you, but the only step that I'm aware of that can have steps actually added to it is the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 25-1/2" Base - 375 lbs # TLA8104; you would want to use the Add-A-Step for TorkLift GlowStep Revolution Scissor Steps with 25-7/16" Wide Mounting Base # TLA8101 to add a step to those. The Lippert Alumi-Tread # LC432698 cannot have a step added to them, unfortunately. I do think these are a nice replacement...
    view full answer...

  • Which TorkLift GlowStep Stow N' Go Scissor Steps Fits 2019 Grand Design 337RLS
  • Since your door entry height is 35 inches the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7844 that you referenced is the correct fit as it has a height range of 31 to 42 inches. The individual steps are a bit smaller than what you have as they are 20 inches wide and 8 inches deep but this would still work great on your 2019 Grand Design 337RLS!
    view full answer...

  • How to Determine if MORryde StepAbove RV Steps MR28RR Require Modification
  • MORryde has qualifications which will tell you if any modifications need to be done to install the MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 4 Steps # MR28RR. As you can see by the cut out I added below, the threshold rise needs to be between 5/8" and 3/4", and the gap from the bottom of your entry and screen door to the top of the threshold needs a 3/8" gap. So if you have those measurements you don't need to do any modifications; otherwise they would be necessary...
    view full answer...

  • How to Determine if TorkLift GlowStep Revolution Fit Grand Design Travel Trailer
  • Steps like the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8104 are not fit guided for year, make and model of trailer the way a trailer hitch is for a passenger vehicle, which means you will need to take a couple simple measurement to determine the correct fit. Just measure from the ground to the bottom of the door opening on your 2019 Grand Design Reflection 297RSTS, as well as the width of the factory mounting brackets. If the width is 25-1/2 inches and the measurement...
    view full answer...

  • TorkLift Step Compatibility with 2018 Grand design Momentum 328m
  • The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 27-1/2" Base - 375 lbs # TLA8004 are a fit for your 2018 Grand Design Momentum 328M. They can be used to replace your current steps if desired. If you have factory SolidSteps then you likely will need to cut a portion of your siding to accommodate the mounting bracket for these steps and will also need the outrigger brackets # LC301704. If you want a step that doesn't require cutting but also will stick out from...
    view full answer...

  • Weight Capacity of TorkLift GlowStep Revolution Uprising Steps A9104
  • I was able to verify with TorkLift that the TorkLift GlowStep Revolution Uprising Steps with Booster Step # TLA9104 have a weight capacity of 375 lbs when used with the TorkLift GlowGuide Handrail # TLA7621. Without the handrail these steps have a 350 lb weight capacity. I have added a link to a video review for you to check out as well.
    view full answer...

  • Pull Out RV Step for Doorway Height of 29 inches
  • Since your doorway height is 29 inches you'd want a triple pull out step setup like the part # LC432696 which will have an overall height of 24-1/2 inches which would cover your doorway height well.
    view full answer...

  • Fitment of SolidStep Manual Fold-Down Steps for 2020 Grand Design Reflection Fifth Wheel
  • The SolidStep Manual Fold-Down Steps, # LC791575 are a four step design for RV's with an entry height between 35" to 44" and a doorway width that is at least 29". If the entry door width and height match these measurements then this is the correct model for your 2020 Grand Design Reflection Fifth Wheel. How to measure height is rather straight forward and you do not need to be concerned about exact measurement. With your RV situated on a level setting and arranged the way you would...
    view full answer...

  • Door Clearance of SolidStep Manual Fold-Down Steps
  • You will be just fine with the SolidStep Manual Fold-Down, # LC791574. This is designed to replace the trim plate. Please see the attached installation video to get a complete visual the installed arrangement. If installed properly your door will close same as it does now.
    view full answer...

  • Replacement Stairs For 2019 Gran Design 29RS
  • It isn't really possible to give you an accurate answer without knowing the measurements of your 5th wheel are. If you do not know how/where to measure for new steps, you just need to measure the width of your current step assembly, and, followed by height from step to step; and finally, take a measure center of the step assembly at the top at the cross bar and make a diagonal line straight down to the edge of the bottom stair. With those measurements in hand, I can properly give an...
    view full answer...