The Brophy Clamp On Camper Tie-Downs, # HSAB are 3/8" thick. So for a snug fit to your topper they will need to be removed or you will need to adjust for this dimension within the seal of where your topper comes into contact with the bed rails. view full answer...
Yes, what you can use is the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555 installed in the ATC Lone Star edition truck topper and your truck's key FOB will lock and unlock the topper. view full answer...
In order to install a ladder rack on your 2014 Toyota Tundra you'll have to remove the truck topper since the mounting brackets sit in the same spot as the topper and the uprights are slanted so they will make contact with your topper.
If you're willing/able to remove the topper when you need the ladder rack then I recommend the Flint Hill Goods Aluminum Pickup Truck Ladder Rack # FHG64ZR because of the aluminum construction. I've put together a handful of these ladder racks and you'd... view full answer...
I do have an option for you but we don't carry replacement parts for ARE toppers. Instead, what we can offer is a new electronic lock which will replace the manual lock, the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers part # PAL9555. view full answer...
You can take a quick measurement to make sure the Darby Extend-A-Truck Kayak Carrier, part # DTA944-968-924 will work for you.
Just measure from the top of the trailer hitch opening to the top of your bed topper. The # DTA944-968-924 extends from 53-3/8 inches to 60-3/8 inches so if this height range clears your topper then the Darby will work well for you. It shouldn't be an issue though because most toppers are not that tall. view full answer...
The channel on top of the truck toppers is compatible the vast majority of the time with Thule equipment as you mentioned. To add an Aeroblade Thule rack, you will want the Thule fit kit part # THKIT3101, the compatible feet # TH460R, and then crossbars like the old Thule AeroBlade or the newer WingBar Evo Load Bars - Aluminum - 60" # TH711520 or # TH711500.
I recommend using the Thule One-Key System Lock Cylinders - Qty 4 # TH450400 to secure your roof rack to your truck topper. view full answer...
Since you are wanting to mount the Podium feet on a fiberglass truck topper using the Thule Podium feet you need the Thule Direct Mount Fit Kit # THKIT3113. view full answer...
The only type of ladder rack we can recommend with a truck bed topper is going to be one that attaches to the top of the topper like the Thule TracRac CapRac part # TH29200XT as there isn't a way to fit a ladder rack that attaches to the bed rails around the topper. view full answer...
Hey Dennis, yes the Agri-Cover Outlander Soft Truck Topper # UT36FR that you referenced is for the 6 foot bed versions of the 2022 Nissan Frontier like you asked about. view full answer...
I have a solution for you, but there are not brackets to mount the Rhino Rack Pioneer platforms directly to your truck topper. I recommend adding a track system to the roof of your topper. You will use the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 to provide the tracks and then use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTP (x2) to mount the platform to the tracks. view full answer...
Because your A.R.E. Topper has the actuating rods instead of a wire pulley setup you'll need to use the Pop & Lock Power Pop Remote Keyless Entry Kit for Hard Tonneau Covers # PAL9000, which will replace your old rotary latch. The actuating rods make this topper not compatible with the # PAL9772 you were looking at, but this would be a comparable replacement. view full answer...
I have a solution for you, but there is not a plug and play type harness for this application that I'm aware of, so the easiest way is to tap into the tail lights on the truck. In order to power the third brake light on your truck topper via the tail lights you will need the Pacer Performance 3rd Brake Light Logic Module part # PP20-702, since the brake/turn signal circuits are combined. This means you'll need to separate the brake/turn signals or else the third brake light would blink... view full answer...
You will need the Rapid Podium Feet # TH460R and the Fit Kit # THKIT3101 to attach your Thule WingBar Evo Crossbars # TH711520 to the tracks on the A.R.E. CX Evolve Topper. Do note as we do not carry this topper I cannot verify the correct length crossbars needed since the WingBar Evo crossbars do not have full length lower channels. So you will need to ensure the length of the channels on your bars are appropriate for the topper. view full answer...
Yes the Rhino-Rack Aero Bar Roof Rack for Camper Shells part # Y02-490B will allow for the slight contour of your truck topper. The track length is as you stated 63" so you have to have at least that amount but if you're slightly over you're in good shape. view full answer...
For your truck topper, I recommend the TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT for transporting your aluminum boat on your Ram 3500. This rack is sturdy and rustproof. It has adjustable load stops for you to secure your boat in place. The crossbars are slotted to allow for quick adjustment and simple tie down points. The mounting brackets swivel for perfect, easily obtainable fit. Drilling is required. The crossbar length is 65 inches.
You may be interested... view full answer...
The GCH # 3460003 camera on third brake light frame would not be a good choice for your intended use. It is attached to a frame that matches the brake light and would not look good standing alone. The better choice is the RVS # WVOS541 wireless camera system. This system will not force you to run wires all the way to your inside truck dash. The small camera will connect to your truck topper and then to power. The monitor mounts to your windshield and simply plugs into your 12-volt outlet/lighter.... view full answer...
To attach a cargo basket such as the Curt Roof Mounted Cargo Basket, # C18115 (41-1/2" x 37") to a truck topper on your 2006 Chevrolet Silverado, you will need to install Rhino Rack Roof Rack, # Y02-490B.
This roof rack is designed to attach to camper shells and tonneau covers and will need to be drilled into your Leer topper. Otherwise you will need to custom fit mounting hardware for the Roof Mounted Cargo Basket, # C18115 (41-1/2" x 37") or the longer # C18115-117 (64-1/2" x 39"). view full answer...
The MaxxFan Deluxe 12V Roof Vent # MA00-06200K will do a great job of moving air through your truck topper since it outputs a healthy 900-cubic-feet-per-minute (CFM) air flow. This vent should be able to cool effectively in your topper well below its maximum speed capacity which should mean quiet operation a long working lifespan.
Since this unit draws a maximum of 5-amps current you'll want to ensure you install it on either an existing lighting circuit that is rated for that much power... view full answer...
The Pop & Lock # PAL9772 will allow you to retain the existing handle on your Leer bed topper, as long as it meets the following criteria:
• Truck cap must have a frameless, bonded glass door with a 1-1/8" center hole for a rotary latch
• Truck cap or tonneau cover must have a cable-latch assembly
The vehicle itself (not the bed topper) needs to have power locks.
If your vehicle and Leer topper meet those parameters, the Pop & Lock # PAL9772 will work great for you. view full answer...
For truck bed toppers/camper shells we have ladder racks that were designed to attach to the roof of them like the TracRac CapRac part # TH29200XT but there isn't a way to attach a ladder rack that attaches to the top of truck bed rails like the # 3371501400 that you referenced.
I attached a picture of what the CarRac looks like installed on a camper shell for you to check out as well. view full answer...
Go To Results