bing tracking image

Filter Questions and Answers:

reset filter
Exhaust Systems
Exhaust Systems
 

Expert Answers about Nissan Exhaust Systems


  • Will The MagnaFlow Exhaust System # MF15815 Exit Through Rear Valance on 1965 Mustang GT
  • I contacted our representative at MagnaFlow about installing the MagnaFlow Exhaust System, part # MF15815, on your 1965 Ford Mustang GT. He informed me that the exhaust system will exit through the rear valance exhaust holes. I have linked instructions for the MagnaFlow Exhaust System, part # MF15815, and an FAQ on exhaust installation.
    view full answer...

  • Cat-Back Performance Exhaust for 2004 Nissan Titan With 5.6L V8
  • Just about any aftermarket cat-back exhaust system for your 2004 Nissan Titan will produce a louder exhaust note than the stock system. The exact sound level and exhaust note will vary depending on whether the system you choose is a flow-through or chambered type. Generally flow-through exhausts like the MagnaFlow # MF15849 for the Crew Cab short bed Titan will be louder than a chambered system, but any other aftermarket products that are installed, such as an intake, also will have an...
    view full answer...

  • Recommended MagnaFlow Exhaust System For 2003 GMC Sierra 1500 Crew Cab Short Bed With V8 Engine
  • We offer two exhaust systems designed for your 2003 Sierra. If you have a single exhaust system, the MagnaFlow Stainless Steel Cat-Back Exhaust System, part # MF15782 would work well for you. This includes the extensions to attach to the front of the muffler and the exhaust pipe. For a dual-exhaust system I recommend part # MF15828.
    view full answer...

  • Does MagnaFlow MF15807 Extend Back From Exhaust Manifold of 2004 Toyota Corolla
  • The MagnaFlow # MF15807 is a cat-back system, meaning it connects to the existing exhaust system at the exit of the catalytic converter and extends rear ward to the exhaust pipe. I've linked you to an FAQ article about Cat-Back exhaust systems.
    view full answer...

  • Exhaust System for 2008 GMC Sierra 1500 Crew Cab 5.3L
  • We have one cat-back exhaust system that will work for your 2008 GMC Sierra 1500 Crew Cab 5.3L V8 regardless if it is a short bed or a long bed, the Magna Flow Turndown Cat-Back Exhaust System # MF17104. This is the only exhaust system we have to fit the 1500 Crew Cab Long Bed 5.3L. I have attached a link to our fitguide for the short bed for you to see all of the exhaust systems that are confirmed to fit your truck if it is a short bed. It is hard to know exactly how an exhaust system...
    view full answer...

  • Recommended Exhaust System For 1965 Mustang With 289 4.7L Engine
  • The exhaust system I recommend for your 1965 Ford Mustang with the 289(4.7L) engine in it is the MagnaFlow Exhaust System, part # MF15817. This is a dual exhaust system that features mandrel bent tubes, meaning they maintain the same diameter throughout while preventing back pressure. The system also boosts horsepower and will give you a deep throaty sound while remaining quiet inside your Mustang. We also offer exhaust tips for your system. The system I recommended has 3 inch tailpipes,...
    view full answer...

  • What is Exhaust System for Generator at Campsite
  • What you are referring to is something like the Camco Gen-Turi RV Generator Exhaust System # CAM44461 which directs exhaust up above the roof line of the RV so that it doesn't affect you or any neighbors near you. It also makes the generator a little bit quieter as well.
    view full answer...

  • Will MagnaFlow Street Series Cat-Back Exhaust System Fit 2018 Toyota Camry SE
  • The only MagnaFlow exhaust system compatible with your 2018 Toyota Camry SE is the Street Series Cat-Back Exhaust System # MF19410. Unfortunately, the # MF19411 will only fit the XSE.
    view full answer...

  • 2018 Camry XLE 2.5L Convert From Single To Dual Exhaust
  • After confirming with Magnaflow, the MagnaFlow Street Series Cat-Back Exhaust System # MF19411 will work on your 2018 Toyota Camry XLE with the 2.5L I4 engine.
    view full answer...

  • Will Installation of MagnaFlow Exhaust on 2008 GMC Sierra Cause Engine Light To Come On
  • When installing the MagnaFlow Exhaust System, part # MF18915, on your 2008 GMC Sierra 2500/3500 V8 6.6L, the first step is to disconnect the vehicle's battery before removal of the OEM exhaust. This will allow the computer to reset itself with the new system, and keep the engine light from coming on. It will also help prevent electrical accidents. I am including a link to the installation instructions on the MagnaFlow exhaust that will help you with the installation of the exhaust system.
    view full answer...

  • Availability of Exhaust System for 2005 Chevrolet Corvette C6
  • For a 2005 Chevrolet Corvette C6 I have the MagnaFlow Stainless Steel Axle-Back Exhaust System, part # MF15886. This is an axle-back system that will install from the axle back to the tailpipe. The polished stainless steel quad tips ( dual tips on each side) are 4 inch diameter. The diameter on the mandrel bent tubes is 2-1/2 inches that connect the system to your exhaust system. I am including a link to the installation instructions on the axle-back system. There is also a cat-back systems...
    view full answer...

  • Does MagnaFlow Exhaust Restrict Air Flow on a 2014 Chrysler 300S V6
  • The MagnaFlow exhaust system # MF15119 for your 2014 Chrysler 300S V6 does not restrict exhaust flow. If you used the same configuration with the stock exhaust parts on the vehicle then that would restrict it some. But the MagnaFlow mufflers have no baffles, chambers or louvers and the pipes maintain the same diameter in the bends allowing the exhaust to flow more freely through the system.
    view full answer...

  • Can the Off Road Turn down Exhaust System be Used in New York on a 2011 Chevy Silverado 1500
  • At this time MagnaFlow does not have a cat-back exhaust system other than the Off-Road Turndown Cat-Back system you referred to for the 2011 Chevy Silverado 1500 with 5.3L engine and extended cab Long bed. Likely there will not be a system produced due to the relatively few trucks with the extended cab long bed that are produced. The Off-Road Turndown Cat-Back System, # MF17101, will fit on your vehicle and is rated at under 95 decibels but it is close to the 95 decibel federal limit for...
    view full answer...

  • How Loud Will MagnaFlow Cat-Back Exhaust # MF16937 Be On My 2004 Lincoln Aviator
  • I contacted our representative at MagnaFlow about the MagnaFlow Stainless Steel Cat-Back Exhaust System, part # MF16937. He informed me that all the exhausts that they develop are designed to be under 95 decibels from outside the vehicle and to reduce drone inside the vehicle. Also, with the amount of sound deadening material on an SUV, that should help reduce some of the noise. But, with any custom exhaust application, there will be a difference in noise. I have driven SUVs with similar...
    view full answer...

  • Do I Need to Remove the Exhaust on My 2011 Subaru Forrester to Install Curt Hitch # 13147
  • You may only need to lower the exhaust system on your 2011 Subaru Forester to install this Curt Hitch, part # 13147. The mechanic maybe did not realize that you only had to lower it temporarily, and he thought you had to remove the whole system. Or maybe he did not realize that if you unhook the four rear exhaust hangers the exhaust will drop enough to allow you to install the hitch. The exhaust will have to be supported at this point to prevent any damage from being done to the exhaust. I...
    view full answer...

  • Will Spare Tire Need to Be Removed with MagnaFlow Stainless Steel Cat-Back Dual Exhaust System
  • The MagnaFlow Stainless Steel Cat-Back Exhaust System # MF15847 is confirmed to fit your 2006 Chevrolet Colorado, Crew Cab, 3.5L I5 Engine. However, the installation instructions state that the spare tire will need to be removed due to the tight clearances of the exhaust system, and the spare will not be reinstalled. The MagnaFlow Stainless Steel Cat-Back Single Exhaust System # MF15845 is also a fit for your Colorado and does not require the removal of the spare tire. Neither of these...
    view full answer...

  • 2017 Honda Civic 1.5 Turbo Exhaust Recommendation
  • The MagnaFlow 4" Exhaust Tip # MF35212 you referenced won't have a big effect on sound, it's more of a cosmetic feature to give the finishing look to an exhaust system. I have put several exhaust systems on just about everything I've ever driven and there isn't too many options aside from replacing the existing exhaust to make it louder. For your 2017 Honda Civi 1.5L turbo a cat back exhaust system like MagnaFlow Street Series Cat-Back Exhaust System # MF19312 would work great. This is...
    view full answer...

  • How To Increase Exhaust Sound on 2014 Mazda 3
  • The size of the exhaust tip has very little if at all to do with sound so the exhaust tips you just purchased are more or less for show. However, if you were to use a resonated exhaust tip such as the Bully Round Resonated Bolt-on Exhaust Tip part # PM-5104 then this would produce a slightly more crackly sound. With that being said, the best way to really change the sound of your exhaust for the better is with a cat-back system, the MagnaFlow Cat-Back Exhaust System part # MF15297 for hatchback...
    view full answer...

  • What Portion of 1972 Ford Bronco Exhaust Does MagnaFlow Exhaust System # MF15344 Attach To
  • The MagnaFlow Crossmember-Back Exhaust System # MF15344 does fit your 1972 Ford Bronco but it would not bolt directly to the exhaust manifolds. It is designed to bolt up to an intermediate pipe that attaches to the manifolds. If you were looking for an excuse to install a set of headers this would bolt to them.
    view full answer...

  • Recommended Magnaflow Exhaust System for a 2017 GMC Sierra 2500HD Crew Cab with the 6.6L Duramax
  • I do have a Magnaflow exhaust system for you but the MagnaFlow Filter-Back Exhaust System part MF18928 is not a confirmed fit for your 2017 GMC Sierra 2500HD. It is only compatible with the 2015-2016 GMC Sierra 2500HD. The 2017 Magnaflow exhaust systems confirmed to fit your vehicle have extra bungs welded onto the pipes as you have mentioned in your question. For this, I recommend using the MagnaFlow Filter-Back Exhaust System part # MF17976 for stainless or part # MF18943 for aluminized....
    view full answer...