bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Dodge Ram Pickup RV and Camper Steps


  • Recommended Permanently Mounted 4 Step Scissor Steps For Camper
  • I may have another option but unfortunately the Brophy Camper Scissor Steps # SS04 you have were not designed to be permanately installed and will not work with the TorkLift GlowStep Stow N' Go Mounting Bracket # TLA7820 you mentioned. The Brophy # SS04 was designed to be removed when traveling, and only installed onto the camper when needed. The only option I can offer that would give you a permanently mounted option on your camper would be to use steps that were designed to be permanently...
    view full answer...

  • Dimensions of Lippert Kwikee Revolution Double Electric Step #LC3725791
  • I spoke to my Lippert contact and they informed me that the mounting width of the # LC3725791 is 24-5/8 inches center on center and 25-9/16 inches over all. I have attached an image of the mounting holes for you to check out. The width of the step is 23-7/16 inches and the dimension of the drop from the mounting bracket to the first step is 7.01 inches and from the first step to the second is 7.67 inches. The depth of the step appears to be 8.18 inches (2nd step) and 9.90 inches (1st...
    view full answer...

  • Comparing Brophy AS25 and TorkLift TLA7506 Camper Scissor Steps
  • The Brophy Camper Scissor Steps # AS25 have 7-inches of rise between steps and an extended height of 40-48-inches. The TorkLift GlowStep Camper Scissor Steps # TLA7506 have 7-1/2-inches of rise between steps and a mounting bracket height of 49-1/2-inches when extended. The reason the two steps have a similar overall height, despite having a different number of steps, is that the Brophy steps are almost 1-1/2-times as deep at 8-3/4-inches versus 6-inches for the TorkLift. The most...
    view full answer...

  • Recommended RV Steps For A Travel Trailer With A 25" Mounting Bracket Width
  • For a mounting bracket width of 25" we only have a one-step RV Step # SMFP-1100. What you can do instead is install an a fold-down step like the MORryde StepAbove RV Steps - 2 Steps Item # MR26RR. It fits a doorway width of 23-3/4" - 26-1/4" and an entry height (ground to bottom of door threshold) of 25" - 29". These sturdy RV steps adjust to rough terrain, eliminating the springboard effect and providing a wobble-free step into your camper. These steps are detachable so you won't get locked...
    view full answer...

  • What Door Size Does Lippert SolidStep part # LC791572 Fit
  • To install the SolidStep part # LC791572 that you referenced your doorway will need to be 26 inches to 29-7/8 inches wide and the threshold 27 to 36 inches from the ground. Since your door matches at 26 inches wide you'd only need to match up the threshold height and you'd be good. If you need a different height email me back with it and I'll come up with the best solution.
    view full answer...

  • Replacement 4-Step Option for a 2016 Grand Design Solitude 384-GK
  • For your 2016 Grand Design Solitude 384-GK, I recommend using the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear. These steps are 22" long x 8" wide and have a distance of 7-1/2" between each step.They will reach from the floor of your RV to the ground using the adjustable landing gear legs. The steps also have glow tape which creates a lighted step surface for safely climbing into and out of your camper at night. In order to determine the correct step for you will need to...
    view full answer...

  • Scissor Step Recommendation for Trailer with Bracket Height of 44 inches
  • For your mounting height of 43 inches the best solution we have is the part # AS25 which has a mounting bracket height of between 40" - 48" which would be perfect for you. The additional step you mentioned would not interfere with that either.
    view full answer...

  • Camper Steps for 24 Inch Doorway and 24 Inch Height
  • There are steps that can work for your Northwind camper and I recommend checking out the Brophy Camper Scissor Steps # SS03 which is a triple step that will work with your 24" height. These are not permanently mounted; instead you install a mounting bracket to your camper and then attach the stairs after reaching your destination. I have added a photo from a customer who has these steps installed as well as a link to a video review.
    view full answer...

  • Can a Lippert Three-Step Pull-Out Directly Replace a Two-Step Pull-Out?
  • The two-step Lippert Manual Pull-Out Step, # LC432682, has step dimensions of 24-1/4 inches wide x 8-1/4 inches deep, with mounting base dimensions of 25-1/4 inches wide x 8-3/4 inches deep and bolt hole centers measuring 24 inches wide x 7 inches deep. The three-step version of the Lippert Manual Pull-Out Step, # LC432687, has the same step size but a slightly different mounting base dimensions of 27-1/2 inches wide x 9 inches deep, with bolt hole centers measuring 26-1/4 inches wide...
    view full answer...

  • Can Brophy Scissor Steps be Mounted to the Rear Bumper on a 2003 Dodge Ram 1500
  • You can attach the mounting bracket for Brophy scissor steps # SS03 to any flat surface that can support the weight of the steps with a person on them. I haven't heard of anyone attaching them to a vehicle bumper but I am sure it is possible. You might want to consider a step that mounts under the bumper such as # B75304 or tailgate ladder such as # 10-3000. I have included some links to videos for you.
    view full answer...

  • Fit of TorkLift TLA8003 GlowSteps on 2013 Cougar MKS333 5th Wheel
  • the TorkLift # TLA8003 GlowSteps are designed for 25-1/2 to 36 inch entry height. The mounting bracket assembly is 27-1/2 inches wide and 13-7/8 inches deep. If the well for the stairs on your Cougar MKS333 5th wheel fits those parameters, the # TLA8003 steps would be a great choice for you. I've liked a demonstration video for the steps that you can check out.
    view full answer...

  • Weight of Econo Porch Trailer Step with Handrail and Landing # EHS-102-R When Folded
  • The weight of the Econo Porch Trailer Step with Handrail and Landing # EHS-102-R that you referenced when folded down and the handle not connected is 45 lb.
    view full answer...

  • Will Brophy Universal Mount Steel Scissor Steps # SS03 Fit 2001 Dodge 2500 with High Truck Bed
  • The Brophy Universal Mount Steel Scissor Steps # SS03 have a height when extended of between 24- and 30-inches. You can measure your truck's bed height to see if this will allow the bottom cross piece (below the lowest step) to reach the ground when installed in your preferred location. This universal step assembly includes a mounting bracket and hardware (please see the linked photo) for installation.
    view full answer...

  • Will Flexco Triple Step SMFP-3100 Fit 2003 Lance Camper 1161
  • The Flexco Step part # SMFP-3100 would be a great option for you as it has a 350 lb capacity and when extended provides a third step that would be roughly 19 inches from the ground on your camper.
    view full answer...

  • Can RV Steps be Installed on a 2014 Dodge Ram
  • We do have some step options that will fit your 2014 Ram but RV steps such as # LC372261 will not work. I have included a link to the cab step options we have for the 2014 Rams. In that link you can select the series (1500, 2500, or 3500) and the cab style of your truck where is says "Select Vehicle Style" to see the available options.
    view full answer...