Expert Answers about Chevrolet Silverado 2500 RV and Camper Steps
- Hand Rail For Lippert SolidStep Manual RV Steps
- Yes, the Lippert Entry Assist Handrail for SolidStep Manual RV Steps part # LC799640 is the hand that you need for your SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames part # LC791574. This hand rail fits third generation Triple or Quad SolidStep models. The Entry Assist Handrail can be easily
removed or left in place when storing if clearance allows inside the trailer.
view full answer... - Correct SolidStep Manual Fold-Down Steps for a Doorway Measuring 28.5" from Flange to Flange
- When measuring your doorway to select the correct steps you will need to measure from flange to flange, not the entire doorway. Since you get a measurement of 28-1/2" flange to flange, the correct steps will be the SolidStep Manual Fold-Down Steps # LC791572 which fit doorway widths of 25" - 28-7/8" and height of 27" - 36". Not the # LC791573 which would be too wide for your doorway.
view full answer... - Dimensions Of The Brophy Camper Scissor Steps # AS25
- I went out and measured the Brophy Camper Scissor Steps # AS25 we had in our warehouse and found them to be approximately 48" tall x 46" in length when fully extended.
view full answer... - Could Mounting Bracket of TorkLift GlowStep Scissor Steps # TLA7802-8000 Attach to Bottom of Step
- It's hard to say exactly how stable the step setup would be, but the TorkLift GlowStep Camper Scissor Steps # TLA7803-8000 that you referenced could have it's bracket attached to the bottom step of your current steps to bridge the 30 inch gap from the bottom step to the ground.
view full answer... - Which Generation is the SolidStep Manual Fold-Down Steps LC791575
- The third generation (3.0) SolidStep Manual Fold-Down Steps are what we currently have in stock and the ones you will receive. The review video you are referring to on the second generation (2.0) was carried over to the product page for the third generation because the only change that was made was to the design of the side rails which doesn't really affect function.
The correct way to measure for the SolidStep is from the frame to frame (see photo) of the trailer door and round up to...
view full answer... - Can Scissor Steps be Mounted on a Pontoon Boat/Trailer for Getting in and out of the Water
- Technically, you could install scissor steps such as # TLA7806 or # AS25 on anything that you want. However you would need to make sure that the bottom of the steps, when pulled out, makes contact with the ground because that is where half of the support would come from.
You also might consider a bunk ladder. I have included a link to the bunk ladder options we have.
view full answer... - SolidStep Fold Out Steps For 2013 Coachman Chaparral 5th Wheel
- Since your door way width at the narrowest point is 30” and your entry height is between 35” to 44”, then the Lippert # LC791575 Solid Step is the best fit.
With bigger steps you may want to consider a bigger hand rail support. The Stromberg Carlson # AC-530 Folding Handrail is the perfect solution. It is easy to install and is very strong.
When you install the SolidStep it will just be natural to remove the old rattle-bang stock steps that came on your trailer. The Lippert #...
view full answer... - Alumi Tread Pull Out Steps for 2018 Montana High Country 305RL
- The best Lippert Alumi Tread Pull Out Steps for your 2018 Montana High Country 305RL would be the part # LC432696 which has an overall height of 30-3/4 inches and is 27-1/2 inches wide. There is a good chance you'd have to install new outriggers too with part # LC301704 with the new steps.
view full answer... - Availability of 4-Step Set of Stairs for a 5th Wheel Trailer
- The only 4-step aluminum steps we carry are scissor steps such as # AS24 but they are not designed for permanent installation on a 5th wheel trailer. For steps that are designed for permanent installation on a 5th wheel trailer you can use Stromberg-Carlson model # SMFP-4400.
view full answer... - Have Lippert SolidSteps Been Updated Over Years
- The Lippert SolidSteps like part # LC791574 have gone through a few revisions mainly to allow them to fit better and work easier. The exact changes are subtle and technical but on our end we find they end up fitting wider door width ranges and they function a little easier overall.
view full answer...
Go To Results