Hi Keith,
So I looked and couldn't find a good photo showing the bumper of your Forest River trailer. Is it totally recessed under the bumper, is it even with the back of your trailer, or does it stick out a bit? If it sticks out at all or is even with the back of the trailer there is an option with a cargo carrier that attaches directly to the bumper (assuming it is a 4" x 4" and 4-1/2" x 4" bumper):
- 24x40 etrailer Cargo Carrier for RV Bumper # e99050
- 24x60 etrailer Cargo Carrier... view full answer...
Hey Carl, unlike bike racks hitch mounted cargo carriers don't have RV ratings so yes you can use the Lets Go Aero part # LGA76VR in an RV hitch although we try to recommend going with a fixed carrier like the part # 63153 as it won't have a folding hinge. view full answer...
Hello Donald. The 24x64 etrailer Cargo Carrier for RV Bumpers # e83YR is designed to fit 4" x 4" and 4-1/2" x 4" RV bumpers. There are no other brackets available, so if your bumper is larger than 4-1/2" x 4" there is no way to mount the carrier. The only way is to have your bumper replaced with something 4" X 4" such as the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT78VR. view full answer...
Hey Louis,
For RV use we recommend using a fixed cargo carrier like the Curt # C18152 because the hinge on folding carriers becomes a failure point due to the less sophisticated suspension of an RV. It fits a 2" trailer hitch receiver, has a 500lb capacity, and is 60" long x 24" wide x 5-1/2" deep. view full answer...
Hello Rob.
The GennyGo is not expandable. The Mount-n-Lock GennyGo HD Folding Generator and Cargo Carrier for RV Bumpers # MNT27ZR is rated for up to 500 pounds, and interior tray is 30" x 30" so if has plenty of room for your 21" x 27" generator.
Another great option for a generator is the etrailer Cargo Carrier for RV Bumper # e99050 which is 24" x 40", can carry up to 500 lbs. and will mount to the bumper in the same fashion as the Mount-n-Lock GennyGo Generator and Cargo Carriers. view full answer...
As long as you RV Bumper is rated to carry the weight of one of the Cargo Carriers # e99050, # e99049 or # e96ZR and the receiver sits far enough below your bumper for your tow bar there is no reason you would not be able to use them together.
Another option which is very popular is using a Dual Hitch # RM-077-8 with a hitch mounted Cargo Carrier # C18152. There are several different height and separation sizes available depending on the height you need your tow bar to sit. If you can... view full answer...
Hi Tom; the 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR comes with the support brackets to reinforce your bumper. You do not need to purchase the # MO22FR separately. view full answer...
Yeah bad news George, it looks like the 24x48 Lets Go Aero BigBoss Cargo Carrier for 2" Hitches H01465 just stopped being made earlier this year so it's not available, unfortunately.
We do have other cargo carriers like the 24x60 Curt Cargo Carrier for 2" Hitches # C18152 which looks to be the same thing as the Big Boss carrier with a bit higher weight capacity, but it is a bit longer at 60". view full answer...
Hi Roger; since you can't get the brackets around there altering or replacing your bumper is the only solution. Unfortunately, there is no adapter that would allow it to fit. You could also get creative and try to come up with a way to weld the # e99050 directly onto the bumper if you don't mind it being permanently attached.
Outside of that, I would say your best option is to add a hitch like the # 13703 which fits frames 22" - 72" wide. Then you could use a hitch mounted cargo carrier... view full answer...
We have the 24x84 etrailer Cargo Carrier for RV Bumper, # e96ZR. From available online specs, the exterior width of the Wolf Pup is listed at 85". We also have the 64" # e83YR, a 60" wide version under part, # e99049 and a 40" version with # e99050. Each of these options are rated for 500 lbs.
The Fulton Economy Spare Tire Carrier, # FETCLB0201 can be used with the cargo carrier to mount your spare tire under the cargo carrier.
If you want a front of the travel trailer option for the... view full answer...
The Mount-n-Lock GennyGo Generator and Cargo Carrier MNT34FR is meant to be mounted on the bumper of your RV and cannot be mounted to the tongue of your trailer without some pretty extreme modification and fabrication. However there is still a solution to mount your generator to the tongue of your trailer, the Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers # CC-255 will work perfectly for your needs and can also support up to 300lbs. This carrier sits 29" above the trailer... view full answer...
The Roadmaster Dual Hitch Receiver Adapter is available in different drop/rise sizes.
4" # RM-077-4
6" # RM-077-6
8" # RM-077-8
10" # RM-077-10
These would allow you to flat or dolly tow a car with a Cargo Carrier # e98874 being used to carry additional gear. view full answer...
I recommend checking out our 24x60 Reese Cargo Carrier # 63153 for use behind your 2022 Keystone Cougar 22MLS. This will fit the 2" receiver opening included from the factory and has a 2-1/2" rise built into the shank to help with ground clearance. view full answer...
Hey Dan, so the etrailer bumper cargo carrier part # e99050 that you referenced is designed to attach to 4 inch or 4-1/2 inch square bumpers. If you have an I-beam crossmember that is 4 inch or 4-1/2 inch square I could see this working potentially but I would have to recommend you have it welded up so that it is boxed where you would want to attach this. view full answer...
Hello Cj; the 24x40 etrailer Cargo Carrier for RV Bumper # e99050 is designed to fit 4" tall x 4" wide and 4-1/2" tall x 4" wide RV bumpers. We don't have a way of knowing what size bumper you have so you will need to measure to see if it fits. It is 40" wide so I would also measure to see if you have enough open space on the back for it to fold up. The only thing that would really get in the way is the ladder or the spare tire assuming you have those on the rear. view full answer...
The answer to your question will depend on your bumper. More than likely the # MO22FR will be the correct part for your Grand Design Transcend Xplor 321BH. If you have a tube frame with a bumper that is 4" - 4-1/2" wide then this will work as extra support for your carrier and generator. You can see this in the attached review video at the 2 minute mark. If you have an I-beam, S-beam, or single channel frame you want the universal # MO34VR instead.
If you don't have a carrier already Mount-n-Lock... view full answer...
Hi David; all of our heavy duty bumpers like the # MNT88VR you were looking at have the same fitment since it is designed to be universal. However, you will need to check out the frame on your Grey Wolf Black Label to make sure it is compatible. This fits I-beam, S-beam, tube, and channel frames which covers almost everything. If you have a flanged frame it must be at least 4" tall x 3" long and non-flanged frames must be 3" tall x 3" long.
If your frame is shorter than your RV body you... view full answer...
Hey there Anthony. While the Yakima EXO Swing Away 2 Bike Rack w/ Enclosed Cargo Carrier - 2" Hitches # Y34ZR will work just fine for you Sprinter Van since we have had several customers confirm fitment without an issue, we do not have the exact measurement from the first bike rack to your back door. We were even told the customers were able to swing the rack out and open the rear door without clearance issues on their Sprinter. view full answer...
Go To Results