Expert Answers about Bumper

• Length of Universal Diamondstep Rear Bumpers
• There are no diamondstep rear bumpers that I can give you which will fit your 2004 Chevy Silverado, as they are universal bumpers for older model trucks and none are designed with your '04 Silverado in mind. What I can do, if you do not want to use a custom-fit bumper, is give you the widths of the universal bumpers so you can see if any match up to the width of the bumper on your truck, but I can't guarantee a fit. - Westin Fey Diamondstep Rear Bumper # 66000: 61-1/2" - Westin Fey Diamondstep...
  view full answer...


• Can 24x40 etrailer Cargo Carrier for RV Bumper e99050 fit 1/2 inch Clearance for Bumper
• If the bumper of your trailer sits lower than the bottom of the trailer body then yes the 24x40 etrailer Cargo Carrier for RV Bumper # e99050 would fit and work well. If the bumper sits up higher though it would not fit as the hardware that secures the carrier to the bumper would interfere.
  view full answer...


• What Is The Widest Step Bumper You Sell
• The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Chrome Plated Steel, part # 21000-92230, is the longest step bumper we offer. It measures 74.5". This bumper fits Ford F series pickups from F-150 up to F-350 from years 1967 - 1997. If you were interested in this bumper, the Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel, part # 21000, is the same bumper without the mounting hardware. I have included a product description link below.
  view full answer...


• Can Factory Bumper Brackets Be Use To Install Westin Diamondstep Bumper On 1995 Dodge Dakota
• In order to install the Westin Fey Diamondstep Rear Bumper part # 63000 on a 1995 Dodge Dakota you will also need the Custom Installation Kit for Westin Diamondstep Bumpers part # 97800 or you can just use the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit part # 63000-97800. The bumper mounting brackets are specific to both the frame and bumper which is why you cannot reuse the factory bumper mounting brackets unfortunately.
  view full answer...


• Weight of Swagman Bike Rack for RV Bumpers with Bumper Adapter
• The Swagman Platform Rack for 2" Hitches of RV Bumpers # S64663 weighs 36.1 lbs. The RV Bumper 2" Hitch Receiver Adapter # S64025 weighs 9 lbs. The total weight for the rack and the bumper adapter is 45.1 lbs. I attached videos below reviewing the bike rack and showing how to install the bumper adapter if you want to check them out. With this bike rack, I recommend upgrading to the anti-rattle hitch lock # S64030 so you can lock the bike rack to your vehicle. When using the bumper adapter,...
  view full answer...


• Light Bar Mounting Dimensions on the Westin Trailblazer Front Bumper Part # 42-2005
• I went out to our warehouse and measured the Westin Trailblazer Front Bumper part # 42-2005 for you. There are two mounting tabs located on top of the inside center section on the bumper which measure 8" apart on center. The actual center section of the bumper is about 12" long from the start of each bend. I have attached a photo of these dimension for you as well.
  view full answer...


• Inside Mounting Dimensions of Surestep Bumper 21002
• The Westin Fey Surestep Rear Bumper - Chrome Plated Steel # 21002 measures 36-1/2 inches between the red lines of the picture you sent. I have added a link to a video review for you as well of the Westin Fey Surestep Rear Bumper # 21002.
  view full answer...


• Metal Thickness For Bumper # MO94VR
• When it comes to The Mount-n-Lock Heavy-Haul'r RV Bumper Replacement Kit - Aluminum - 4 inch - 500 pounds # MO94VR is 0.100 inches thick per the manufacturer. This bumper will fit the I-beam, S-beam, tube, and channel frames. The flanged frames must be at least 4 inches tall x 3 inches long. Non-flanged frames must be at least 3 inches tall by 3 inches long. The maximum capacity of the bumper is 500 pounds when evenly distributed. I attached a review video link below.
  view full answer...


• Replacement Rubber Bumper for a Trailer
• The holes on your existing bumper seem to be about 11 inches apart. The holes on bumper # D3-96 are also 11 inches apart. You may have to drill a hole or two to get it lined up with the first hole but then it should line up nicely. I have also included a link to the right that will explain how to estimate shipping cost.
  view full answer...


• Thickness Of The Diamondstep Rear Bumper Part # 20009
• The Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel # 20009 is approximately 1/8" thick.
  view full answer...


• Dimensions of the Bumpers in the Replacement Fifth Wheel Trailer Hitch Bumper Installation Kit
• I went to the warehouse to pull a Replacement Fifth Wheel Bumper Installation Kit, # 58089, to take some measurements. I have included a picture showing the measurements I took. The diameter of the bumpers at the bottom is 1 inch. They are bullet shaped so they are more narrow at the top as you can see in the pictures. The overall height is between 15/16 inches and 1 inch.
  view full answer...


• What is the Height of the Bumper Mounted Tire Spare Carrier # TR-1 from the Top of the Bumper
• The distance from where the Bumper Mounted Spare Tire Carrier - U-Bolt Mount, item # TR-1, will mount to the top of the bumper to the top of the spare tire carrier is 13-1/8 inches. There is a metal tab on the back of the spare carrier that rests on the top of the bumper when mounted. You will need to keep in mind that the spare tire will mount to the carrier and will stick up 1/2 of the overall diameter of the tire from the center of the tire mounting location. The center of the spare...
  view full answer...


• Compatibility of Trailer Hitches for Lowered 1995 Chevy C1500 Pickup
• You can refer to the linked article for help confirming which bumper style you have on your 1995 Chevy C1500 pickup. This is important to selecting a compatible hitch. Once you have confirmed your bumper design you can refer to the linked page that shows all 2-inch and 2-1/2-inch trailer hitch receivers made for your pickup. As you review the hitches you will see installation notes that mention any fit exclusions, such as fit issues based on bumper type or bed length. The Draw-Tite #...
  view full answer...


• Weight Capacity Of RV Bumper Mounted Hitch Receiver
• This Clamp-On RV Bumper Hitch Receiver, part # S64025, is constructed of solid steel and designed to fit 4 inch by 4 inch bumpers. Its load capacity is 200 lbs which should be plenty strong to hold two bikes and the weight of the bike carrier. You will want to check with the RV manufacturer to make sure you never exceed the bumper weight capacity on your RV. This receiver should not be used with aluminum or spot welded bumpers. It is not designed for cargo carriers or for towing. I have...
  view full answer...


• What Is The Total Height of Swagman RV 2 Inch Trailer Hitch Receiver Above RV Bumper?
• The RV Bumper 2" Trailer Hitch Receiver - Clamp-On # S64025 It is right at 3 inches tall from the bottom of the top plate to the top of the receiver collar. It will fit and give you clearance so it will serve you well. The capacity of the hitch receiver will be limited by the bumper capacity or the 200 lb tongue weight capacity of the receiver.
  view full answer...


• Actual Weight of Swagman Bumper-Mount 4-Bike RV Bike Rack S80600
• The Swagman Bumper-Mount 4-Bike Carrier for RV Bumpers # S80600 has a shipping weight of 48-lbs so once you deduct the weight of the packing materials and carton the atual weight of the assembled rack itself will be 45-lbs. This bike rack can be used on RVs with square steel bumpers that measure 4- to 4-1/2-inches and that are continuously welded along their entire length. Spot-welded steel bumpers and aluminum bumpers are not suitable as they will not have the required weight capacity....
  view full answer...


• Distance from the Hitch Pin Hole to Bumper on Hitches for 2014 Subaru Outback Wagon
• On the Curt hitch part # C13206 the distance from the center of the hitch pin hole to the furthest point out on the bumper will be right at 2-1/2 inches. On the Draw Tite Hitch # 75673 the distance from the center of the hitch pin hole to the furthest point out on the bumper is 4-1/2 inches. Both of these hitch are the exact same because they are made by the same company. The distance from the pin holes to the opening surface of the hitch is about 2-1/2 inches. So if you subtract 2-1/2...
  view full answer...


• What Determines Cargo Weight Limit for Hitch Carrier Installed on RV Bumper Hitch
• The amount of actual cargo weight you can safely transport on a hitch cargo carrier installed in a bumper-mounted hitch is determined by the lowest-rated component. Those components consist of the RV's bumper, the hitch such as # UF35-946401 that is mounted on it, and the cargo carrier itself. The lowest-rated of the three items will determine overall capacity. If you have a 500-lb-rated cargo carrier like Curt # C18151 and install this in the 200-lb-rated Ultra-Fab RV Hitch # UF35-946401...
  view full answer...


• Is Rubber Bumper D4-96 a Round or Square Style of Bumper
• What you see in the attached picture is what you'd get if you ordered the Pre-Drilled Rubber Bumper part # D4-96 that you referenced. It has an odd shape that doesn't completely match the description of round or square, but the picture shows what it actually is.
  view full answer...


• Does Extension for etrailer Cargo Carrier for RV Bumpers Reduce Weight Capacity
• That's a good question, and the 500 lb weight capacity of the 24" x 40" etrailer Cargo Carrier for RV Bumper # e99050 will not be reduced if you add one or even two of the 24" Extension for etrailer Bumper Mounted RV Cargo Carrier # e99052. The cargo carrier will still have its 500 lb capacity even with the extension (or extensions), though keep in mind you will want to verify the weight capacity of your RV's bumper to ensure you don't overload it. I have added links below to video reviews...
  view full answer...