Yes it will. The Access TonnoSport Tonneau Cover item # A22030179 is compatible with a ladder rack and does fit the 5' bed of the 2019 Nissan Frontier.
For a ladder rack, I recommend the Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43001XT-603. This ladder rack attaches to your Frontier's stake pockets and mounts on top of the bed sides.
The Thule ladder rack system has a no drill installation and a 1,250 lbs capacity. The slotted crossbars accept a wide variety of accessories... view full answer...
To add a ladder rack to your 2023 GMC Sierra 2500, I recommend the Thule TracRac TracONE Truck Bed Ladder Rack item # TH27000XTB. This ladder rack has a 800 lbs capacity and fits both the 6-3/4' and 8' bed lengths.
The Thule ladder rack system has a no drill installation and attaches to the side of your bed rails using screw down clamps like you would use to attach a camper shell. Each upright is held on by two.
I have linked an installation video below to help you get this ladder rack set up. view full answer...
Yes, it is. We have four different options for sliding ladder racks that fit the 2024 Ram 2500. Two are for the 8' bed length and two are for the 6-1/2' bed lengths without Ramboxes. There are also different options for the ladder racks that have the cantilever section that hangs over the cab. I have listed all of these options below:
6-1/2' Bed without Rambox
With Cantilever - Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever item # TH43003XT-501EX
W/out Cantilever - Thule... view full answer...
I have a way to add a ladder rack to your 5' bed 2023 Ford Ranger but there are no sliding ladder racks available for your truck that are compatible with a Paragon bed cover. I confirmed this information with Thule.
I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack item # A36ZR. This ladder rack is compatible with your Paragon bed cover because it mounts into the stake pockets on your bed rails. The Adarac ladder rack has a 500 lbs capacity and uses 66" long x 1-1/2" wide... view full answer...
The BAKFlip MX4 Hard Tonneau Cover installs inside the bed rails so you can use a ladder rack which mounts in the stake pockets. The way the ladder rack must install it doesn't give you many options. There are two I recommend looking at and the choice comes down to what function they are going to be used for. Both can slide up and down the tracks but can not be moved up and down.
The first is the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43003XT-785. The Thule TracRac SR... view full answer...
Yes, it does! The Thule TracRac TracONE Ladder Rack w/ Cantilever item # TH27000XT-EX fits all three bed lengths of the 2024 Chevrolet Silverado 1500 including the one with a 5-3/4' bed. This ladder rack comes with a cantilever to give you an extra mounting point above the cab for more stability for your ladders or other equipment. This rack has an 800lb overall capacity.
I have linked an installation video below so you can see how to get this ladder rack set up. view full answer...
To add a ladder rack to your, 2024 Ford Maverick, I recommend the is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack item # Y01151-57.
The Yakima ladder rack system has a no drill installation and a 500 lbs capacity. The system attaches to the side of your bed rails using screw down clamps like you would use to attach a camper shell. Each upright is held on by two.
I have linked an installation video below so you can see how to get this ladder rack set up and some of its features... view full answer...
The Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28 has a 400-lb total weight rating for its two adjustable crossbars so I would expect that it will be up to the task of handling your extension ladder.
As a check I looked into the weight of several extension ladders; a Werner 40-foot fiberglass extension ladder weighs between 89-lbs and 125-lb depending on the specific model. 40-foot aluminum extension ladders tend to weigh about the same.
If you plan to use two of the Rack'Em... view full answer...
Yes, we do! I checked with Adarac and we have three of their ladder racks that fit your 2011 Chevy Silverado 2500 with a 6-1/2' bed. I have listed all three below:
Adarac Aluminum Series Custom Truck Bed Ladder Rack item # A62UG
Adarac Aluminum Series Custom Truck Bed Ladder Rack item # A79FR
Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum item # A84WG view full answer...
We do have an identical Ladder Rack but the item # TH43002XT-501 you referenced is for a Ram truck. You will want the Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43002XT-501. This ladder rack is custom fit to your 2016 Ford F-150 Super Crew with the 6-1/2' bed.
We also have the Cantilever Extension for Thule Ladder Racks item # TH24001XT that extends this ladder rack over the roof of your truck for extra support. view full answer...
If you check out the picture I attached of the MaxxHaul Truck Bed Ladder Rack MT70386 installed you can see that this rack sits very tall on the back of the truck. The overall height is 45 inches.
For a lower height ladder rack that is also cost-effective the Erickson Truck Bed Ladder Rack # EM07706 has been confirmed as a fit for your 2006 GMC Canyon with a 5 foot bed and only sits 33-1/2 inches tall. view full answer...
Yes, I was able to find your account and found that you purchased the Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum # EM07705. This ladder rack has a maximum weight capacity of 800lbs. view full answer...
Yes, I do have a ladder rack that will work with your 2022 Ford F-250 Super Duty's Retrax Pro Tonneau Cover. It is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack item # Y01151-58. This ladder rack has a weight capacity of 180 lbs off road and 300 lbs on-road. It has a crossbar spread of 36" - 89" and an upright adjustable height of 19" - 30" above truck bed rails.
You will need the Yakima Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks item... view full answer...
The Sportrack ladder rack part # SR1005 is a semi-custom roof rack confirmed as a fit for your 1999 Chevy Cavalier that has the potential to carry a couple of ladders as long as the weight of the two is less than what the owners manual of your vehicle states is the roof capacity.
For straps to secure the ladder to the rack you could use the part # RTD3 which comes with two straps. view full answer...
To add a ladder rack to your 2023 Ford Maverick, I recommend the Yakima OutPost HD Overland Truck Bed Rack item # Y01152-57. The Yakima ladder rack system has a no drill installation and a 500 lbs capacity. The system attaches to the side of your bed rails using screw down clamps like you would use to attach a camper shell. Each upright is held on by two.
I have linked some pictures below along with an installation video so you can see what this ladder rack looks like installed. view full answer...
That one won't let you open a folding tonneau cover all the way but I have a ladder rack that I can guarantee will. It is the Adarac Pro Series Custom Truck Bed Ladder Rack item # A42WG in black or item # A49FR with an aluminum finish. This ladder rack is confirmed to fit a 2021 Ram 3500 with a 6-1/2' bed. The Adarac Ladder rack has vertical uprights that attach to you Ram's stake pockets. The vertical uprights will allow you to open your folding tonneau cover completely. This system has... view full answer...
The ladder rack with the highest weight capacity that fits your 2020 Jeep Gladiator is the Thule TracRac Pro 2 Truck Bed Ladder Rack # TH37002XT. This rack has a 1,000 lb weight capacity which is twice the amount of any other rack that fits, such as the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 or Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # TH500XT (Silver) or # TH500XTB (Black).
For heavier loads, the TracRac Pro 2 is exactly what you need, and even... view full answer...
I do have a ladder rack that will work for this application. My recommendation is the T-Rac Pro2 Truck Bed Ladder Rack for Compact Pickups - Fixed Mount - 1,000 lbs, part # TH37001XT. It has a dynamic weight limit of 1,000 lbs. You will have to check with Ford to see if your truck's rails can support this weight.
The weight limit of the Thule Xsporter Pro Mid Overland Truck Bed Rack - Aluminum - 600 lbs, part # TH34RR, is a dynamic weight limit. This means while your vehicle is in motion.... view full answer...
The Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43003XT-000 weighs 89 lbs and is custom fit for the 2024 Ford F-250's with a 8 foot bed. This ladder rack attaches to the stake pockets and has a 1,200 lbs capacity.
I have linked a review video below so you can see the features of this ladder rack demonstrated. view full answer...
We have two options for sliding ladder racks that fit a 2024 Ram 2500 with the shorter 6-1/2' bed. It is important that you do not have the Ramboxes because neither will fit if you do.
Both ladder racks have a 1,250 lbs capacity and install by attaching to your truck's side pockets. The only difference is one of them has a cantilever section that hangs over your Ram's cab for extra storage room. I have listed both options below:
With Cantilever - Thule TracRac SR Sliding Truck Bed Ladder... view full answer...