Expert Answers about RV and Camper Steps
- Do Fold-Out Steps Need to be Removed When Mounting Brophy Scissor Steps
- That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as when your steps are folded up there is no interference in that area the Brophy steps will be a great option. I added a photo for you a customer sent in which shows the bracket and steps installed so you can get an idea of how they mount.
The...
view full answer... - RV Steps for 29.5 inch door w/ a 36.5 Drop
- For a 29.5" doorway with a 36.5" stair height I recommend the MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 4 Steps item # MR28RR. These steps are for entryways with a doorway width (from inside flange to inside flange) of 27-3/4" - 30-1/4". The step dimensions are 23-1/2" wide x 8" deep and the top step depth is 10-5/8".
view full answer... - MoRryde Quick Connect Removable Entry Steps Weight Measurements
- The MORryde Quick Connect Removable Entry Steps for 27-1/2" to 36" Entry Height - Triple Item # MR63RR steps weigh approximately 48lbs and have a weight capacity of 500lbs.
view full answer... - Is There a Folding Double Step That is 24-1/4 Wide x 8-1/4 Deep
- There is a folding double step that has the same 24-1/4 inch wide x 8-1/4 inch dimensions as the Lippert Manual Pull-Out Step for RVs - Single # LC432678; the step you are looking for is the following:
- Lippert Manual Pull-Out Step for RVs - Double # LC432682
I have added a link below to a video review for you to check out as well if you'd like to take a look.
view full answer... - Dimensions Of The Brophy Camper Scissor Steps # AS25
- I went out and measured the Brophy Camper Scissor Steps # AS25 we had in our warehouse and found them to be approximately 48" tall x 46" in length when fully extended.
view full answer... - SolidStep Manual Fold-Down Steps Leg Adjustment Height
- The SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames - Triple - Aluminum, # LC791572, has adjustable legs that adjust in 1" increments. When drawn fully in the feet can be pulled in approximately 1" from the bottom step. Please note the product review and installation videos that have been linked.
A valuable addition to the SolidStep is the, Lippert Entry Assist Handrail for SolidStep, # LC799640. And the SolidStep Locking RV Storage Box - Powder Coated Steel -...
view full answer... - Picking Out Torklift 4 Step or 5 Step Glowstep Setup for 5th Wheel
- The way to pick out the correct Torklift Glowstep is to go by the height from the threshold of the door down to the ground. Since you mentioned 3 feet the 4 step # TLA7844 is most likely what you need as it has a height range of between 31 and 42 inches. 3 feet is 36 inches. If you can get me an exact number though I can verify for sure what you'd want.
The 5 step version part # TLA8005 has a height range of 39-1/2 to 52 inches.
view full answer... - How Much Doorway Height Does MORryde StepAbove RV Steps MR26RR Require
- In order for the MORryde StepAbove # MR26RR to fold down you'd need to have between 25 and 29 inches from the threshold to the ground on your RV.
view full answer... - Folded Up Dimensions of Brophy Camper Scissor Steps AS24
- I checked with Brophy and the folded dimensions of the scissor steps part # AS24 are 25" x 17" x 13".
view full answer... - What Is The Weight Difference Between The Steel And Aluminum Brophy Truck Camper 4 Step Models
- Great question.
The Brophy Camper Scissor Steps - 4 Steps - Aluminum - Diamond Tread - 17" Wide - 250 lbs # AS04 weigh in at 21 pounds.
The Brophy Camper Scissor Steps - 4 Steps - Steel - Diamond Tread - 17" Wide - 275 lbs # SS04 weigh in at 34 pounds.
view full answer... - Dimensions of 4-Step TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear
- The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the bracket and landing feet (see attached photo).
view full answer... - Mounting Bracket Dimensions of Lippert Kwikee 39 Series Electric Step # LC3724742
- I attached a picture that shows the dimensions of the Lippert Kwikee 39 Series Electric Step # LC3724742 relevant for mounting the step. This could still mount on your Beaver Patriot but it's likely you'd have to move the mounting brackets out of the way and then attach this directly to the RV.
view full answer... - Height Measurement from Top Step to Top of Mounting Bracket
- The Lippert Electric Tread Lite Step for RVs # LC353543 has a top step that measures 4-1/2 inches from the top of the step to the top of the bracket frame. I confirmed this with my contact at Lippert/HappiJac who makes this step.
view full answer... - What Does Econo Porch Trailer Step # EHS-103-R-HR Weigh
- The Econo Porch Trailer Step # EHS-103-R-HR that you referenced weighs 83 lbs. It has a weight capacity of 350 lbs. I attached a link to a review video for this for you to check out as well.
view full answer... - Inner Door Clearance Required Lippert Solidstep Torklift GlowStep Uprising MorRyde StepAbove
- The Lippert Solid Steps like part # LC791572 require 13 inches of inside clearance in the door. The MorRyde # MR48RR requires 8-9 inches according to MorRyde. And then the Torklift Glowstep Revolution # TLA9104 sits inward 12-1/2 inches. These are all dimensions I verified with the manufacturer.
The feedback that we've gotten on all three of these is that they are all very solid when in use. These are the top of the line RV steps so that would be expected. So from that point of view...
view full answer... - Mounting Bracket Dimensions of Manual Pull-Out Step
- The Manual Pull-Out Step for RVs - Double # LC432682 has mounting holes that are about 24" x 7" and although there are not any with a 14" x 7" pattern, you can still use this step. In order to do so you have a couple of choices. The first would be to weld the steps onto your RV while the other option would be to use Lippert Outriggers for Manual and Electric RV Steps # LC301704. You would need Mounting Hardware # LC118155-72 to attach the steps to the Outriggers.
view full answer... - Width of Lippert LC733932 Solid Step RV Steps
- The widest point of the Lippert # LC733932 Solid Step is 24 inches, which is the dimension from the outside of one stringer to the outside of the other. The latching mechanism that holds the steps folded upright into their storage position is width adjustable for doorways from 29-36 inches in width. The photo I provided shows a good view of the adjustable latching mechanism.
I've linked to an installation/demonstration video for the Lippert Solid Steps.
view full answer... - Mounting Bracket Dimensions for Brophy Camper Scissor Steps # AS24
- I went out to our warehouse to take a few measurements on the mounting bracket for the Brophy Camper Scissor Steps # AS24. The base bracket profile measures 24 inches long, 1 inch tall, and 1 inch deep. The shorter tabs that will be closer against the trailer/RV extend the bracket by just 3/8 of an inch, giving it an overall height of 1-3/8 inches. The slightly longer angled tabs that will actually attach to the step assembly extend the bracket by 5/8 of an inch, giving it an overall height...
view full answer... - Dimensions of Lippert Kwikee Revolution Double Electric Step #LC3725791
- I spoke to my Lippert contact and they informed me that the mounting width of the # LC3725791 is 24-5/8 inches center on center and 25-9/16 inches over all. I have attached an image of the mounting holes for you to check out. The width of the step is 23-7/16 inches and the dimension of the drop from the mounting bracket to the first step is 7.01 inches and from the first step to the second is 7.67 inches. The depth of the step appears to be 8.18 inches (2nd step) and 9.90 inches (1st...
view full answer... - Retracted Overall Height of Flexco Manual Pull-Out Step for RVs # SMFP-1220
- The retracted height of the Flexco Manual Pull-Out Step for RVs # SMFP-1220 is 4-1/2 inches.
view full answer... - Replacement Steps for Seasonal 5th Wheel with Door 38 Off Ground
- I have a solution for you, but as far as porch style trailer steps go, the Econo Porch Trailer Step with Handrail # EHS-103-R is going to be the tallest step we have available.
I recommend going with the TorkLift GlowStep Revolution # TLA9005 . These steps can be used for entries 34-7/8" to 42-3/8" and the steps have a rise/drop of 7-1/2" which is going to keep you from having to step up too high/too far down at any point. They easily pull out from the trailer and the scissor design...
view full answer... - Mounting Bracket Dimensions of the Flexco Manual Pull-Out Step SMFP-1100
- The mounting bracket portion of the Pull Out Steps part # SMFP-1100 that you referenced is 6 inches long with a distance of 4-1/2 inches between mounting holes.
From outside to outside of each bracket it measures 25 inches. From bolt hole center to bolt hole center it measures 23-1/4 inches.
I attached a picture that has these dimensions and a few others for you to check out as well.
view full answer... - Distance from Top to Bottom Mounting Holes for the TorkLift GlowStep Stow N Go Steps # TLA7834
- The top to bottom distance for the holes in the mounting bracket that comes with the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7834 is 2-1/2" on center.
view full answer... - Distance from RV Frame to First Step for the Torklift Glow Steps
- I spoke with my contact at Torklift and he informed me that from the mounting surface of where the Torklift Steps part # TLA8004 attaches down to the first step measures 3 inches in the highest setting.
He also said that there is a 3 way adjustment you can make for the position of the step that will change that distance. Highest is 3 inches, middle is 5 inches, and lowest is 7 inches.
view full answer... - Dimensions of Lippert Kwikee Steps Single Step # 3747451 and # 3756271
- The Lippert Components Kwikee 28 Series Electric Step # LC3747451 has a height of 5.88 inches when retracted. The Lippert Components Kwikee 35 Series Single Electric Step # LC3756271 has a height of 5.75 inches. I've attached a couple photos with more dimensions to assist.
view full answer... - What is the Drop/Rise Measurement for Lippert Kwikee 28 Series Electric Step LC3747451
- For the Kwikee step # LC3747451 it measures 9.33 inches from the top of the mounting surface to the bottom of the step (when the step is out). The distance from the top of the step to the top of the mounting surface is 7 inches. So the drop/rise is 7 inches.
view full answer... - P/N TLA8003 Torklift Glowstep Revolution Dimensions
- I spoke to my contact at Torklift and he informed me that the left to right width of the mounting bracket of the Torklift Glowstep Revolutions like the part # TLA8003 is 27-1/2 inches and the front to back depth is 12 inches.
All of the Torklift steps that begin with the part number TLA80XX are 27-1/2 inches wide and the ones that start with TLA81XX are 25-1/2 inches wide.
view full answer... - Distance Between Lippert Pull Out Steps LC432687
- The Lippert Pull Out Steps part # LC432687 have a distance of 7 inches from the top of one step to the top of the step below it.
I attached a picture that shows this and a few other dimensions for you to check out as well.
view full answer... - Mounting Measurements for Lippert Manual Pull-Out Step LC432690
- For Lippert Manual Pull-Out Step # LC432690 the mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. The side plates are 16 inches tall. I have included some pictures with these and other measurements.
view full answer... - Dimensions of Kwikee 32 Series Double Step # LC3722617
- The Kwikee 32 Series Double Step # LC3722617 is 24 inches wide at each step but the frame it mounts to at the widest point is 25-1/4 inches. I've attached a photo to assist with all the dimensions.
view full answer... - How Wide is the Lippert SolidStep for 24 Wide Doors
- The SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames - Double - Aluminum # LC713662 is roughly 22" wide when measured from the outside of each step frame, so you will be able to make this fit inside your 23-1/2" wide door frame. I've linked a photo diagram of this measurement.
view full answer... - How Far Out Do Brophy Camper Scissor Steps # AS25 Stick When Installed at 45 inch Height
- When you have the Brophy Camper Scissor Steps # AS25 installed at a 45 inch height they will stick out from the vehicle right at 46 inches.
I attached a review video for these for you to check out as well.
view full answer... - Bolt Pattern and Mounting Plate Dimensions for Kwikee 40 Series Steps
- In regards to the Kwikee 40 Series Electric RV Steps like part # LC3726891, the step mounting plate is 25-3/4" wide x 14-3/4" deep and the bolt pattern is 20.5" wide x 12-7/8" deep. I confirmed this with Lippert for you and have attached a photo below.
view full answer... - Dimensions of CR Brophy 3 Step Scissor Steps # SS03 Folded Up
- I went out to the warehouse and pulled part # SS03 and took some measurements for you. (See image). The steps are 9-1/2 x 18-1/2 x 9-1/4 when folded.
According to my contact at CR Brophy, the actual weight of the # SS03 scissor steps is 29 lbs.
view full answer... - Dimensions for TorkLift GlowStep Revolution Scissor Steps # TLA8004
- The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 referenced in your question is a 4-step assembly with a step platform dimension of 22 inches wide and 8 inches deep. The mounting base measures 27-7/16 inches wide and 12 inches deep and the steps have a drop/rise of 7-1/2 inches. The height of the steps when collapsed is 16-17 inches and the height from the top of step opening to the ground can be adjusted from 32-1/2 inches to 40 inches.
These pull-out steps feature...
view full answer... - Weight And Capacity Of MoRryde StepAbove RV Steps
- The MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 3 Steps # MR78RR weighs 59 pounds.
It has a drop and rise of 9 inches and a weight capacity of 500 pounds.
It fits a threshold-to-ground height between 34" and 36" inches.
view full answer... - Dimension of Safety Step # SASA-10C-G Base Legs at Full Height
- At the full 9 inch height, the Safety Step 19 x 15 Inch # SASA-10C-G is 24 x 19 inches. I've attached a photo and a couple videos to assist.
view full answer... - Dimensions for Hickory Springs Manual Pull-Out Steps # 98224EXTALC1
- The Hickory Springs Manual Pull-Out Steps # 98224EXTALC1 referenced in your question feature a distance of 14.74 inches from the top of the mounting brackets to the bottom of the assembly when fully open. The mounting base has an overall width of 27.50 inches with a 9 inch drop/rise between the steps.
I have attached an image with these and other dimensions labeled for this particular assembly that you can check out as well. You can also use Outriggers like # LC301704 to install new...
view full answer... - What is the Height of the Retracted TorkLift Glow Step Revolution
- The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8102 have a height of 16-1/2" from the top of the mounting bracket to the bottom of the steps when fully retracted. I've attached a photo of this to give you a visual.
view full answer... - Ground Clearance with Flexco SMFP-3100 2-Step RV Steps
- There really isn't a set ground clearance, the underside of the housing will sit 14-1/2 inches lower than the top of the mounting flanges as shown in the provided photo. If you measure 14-1/2 inches downward from where you'll mount the steps, you'll know exactly where the underside of the steps will sit in relation to everything else on the RV undercarriage.
I've linked to a product description video featuring the # SMFP-3100 RV Steps.
view full answer... - What is Overall Height and Width of Econo Porch Trailer Step with Handrail and Landing # EHS-103-R
- When assembled the Econo Porch Trailer Step with Handrail and Landing # EHS-103-R is 28 inches wide and 61 inches tall (from the base to the top of he rail at the landing). I have included a picture with measurements for you.
view full answer... - How Far Out Does TorkLift GlowStep Stow N' Go Scissor Steps # TLA7844 Extend
- The TorkLift GlowStep Stow N' Go Scissor Steps # TLA7844 is going to extend out roughly 38 inches from where it installs. I say roughly since it's a scissor step and how far the steps extend changes the distance they stick out.
view full answer... - Distance Bracket Sticks Out on Brophy Scissor Steps
- On the Brophy Scissor Steps # AS04 there is about 7 to 7-1/2 inches when the steps are at their highest point from the bracket to the closest edge of the top step.
The mounting bracket itself does not stick out at all.
view full answer... - Comparing Dimensions for Lippert Alumi-Tread Manual Pull-Out Step 3 and 4 Step Assemblies
- The Lippert Alumi-Tread Manual Pull-Out Step - Quad # LC432698 that you referenced does indeed feature a drop/rise of 8 inches, while the Lippert Alumi-Tread - Triple # LC432696 has a drop/rise of almost 9 inchces (8-3/4 inches to be exact).
The 4-Step model will feature an overall distance of 49-5/8 inches from the top of the mounting bracket to the bottom of the last step. The 3-Step model has a distance of 38-3/4 inches for this measurement. The ideal entry height for the 4-Step,...
view full answer... - Weight of the Brophy Camper Scissor Steps # AS25
- The Brophy Camper Scissor Steps # AS25 weigh 33 lbs. They can be folded up, as shown in the attached photo, to make handling them easier since you will be taking them on and off.
I've also added a link to a video review of this product for you to take a look at.
view full answer... - Bolt Pattern for Lippert Kwikee 25 Series Triple Electric Step # LC3658373
- The mounting bracket for the Lippert Kwikee 25 Series Triple Electric Step # LC3658373 features bolt holes that are spaced apart 22 inches side to side and 8 inches front to back, on center. The bracket itself measures 25-1/2 inches wide, 9-5/8 inches tall, and 11-3/8 inches deep.
I have attached a couple short video demonstrations on this assembly that you can check out as well.
view full answer... - Height of Steps on TorkLift GlowStep # TLA8003 When in Stowed Position
- The steps on the TorkLift GlowStep Revolution Scissor Steps # TLA8003 referenced in your question feature a vertical height of 13-3/4 inches to 14-3/4 inches when fully collapsed in their stored position.
This is a really nice, 3-step scissor step assembly that features an easy-to-use lever that will actually let you choose between 3 different height settings. The included landing gear will create a stable connection from the bottom step to the ground and the glow tape provides a lighted...
view full answer... - Dimensions of Lippert Components Kwikee 40 Series Double Electric Step
- When retracted, the Lippert Kwikee 40 Series Double Electric Step # LC3726892 measures 20.5" long and 6.5" high. When the steps are deployed they measure 33.63" long and 17.38" high; the steps have a mounting bolt pattern of 12.875" x 20.5" that would need to match what is on your RV for the steps to work.
view full answer... - What Is Distance From Mounting Strip To Top Step On Brophy Aluminum Scissor Steps
- I went to the warehouse and pulled one of the Aluminum Scissor Steps, part # AS23 to take a measurement for you.
I have attached a photo of the top mounting strip and step you can check out. The distance from the mounting strip on the step assembly to the back of the top step is 3-1/4 inches. The distance from the inside of the mounting strip that is installed on the Trailer or RV to the back of the top step is right at 4 inches.
view full answer... - Dimension Between Steps of the Brophy Step SS02
- I spoke to my contact at Brophy and he informed me that from the top of the top step down to the top of the bottom step the steps measure 7 inches.
From the ground to the top step it will measure exactly 3 inches from the total height. Since this step has a range of 18 to 23 inches in total height you would just need to subtract 3 inches and you would have the dimension you are looking for.
view full answer... - Overall Depth of SolidStep in Stowed Position
- At it's widest point, including the yellow handle, the SolidStep # LC698799 measures right around 11 inches, as shown in the attached photo.
Replacement steps are not available individually, so if you somehow damaged one of the steps, the entire unit would need to be replaced.
view full answer... - Dimensions of Safety Step Folding Platform Step With Legs Extended
- I was able to get the measurements with the legs extended of the Safety Step Folding Platform Step # SASS-07C-S.
With the legs out and extended, the overall measurements are 17-1/2" long x 14-1/4" wide x 7-1/8" tall.
I have added a link below to a video review for you to check out as well of the Safety Step Folding Platform Step # SASS-07C-S.
view full answer... - What Is Overall Depth Of Brophy Camper Scissor Steps AS05 When Fully Extended
- I went to the warehouse and took a measurement of the Brophy Camper Scissor Steps, part # AS05 for you.
The distance form the top mounting bracket to the front of the lowest step is 39-1/4 inches. The distance form the frame below the lowest step is 40-1/8 inches. I have attached a photo of the steps with the dimensions noted.
view full answer... - Dimension of Flexco Manual Step # SMFP-1100 When Folded In
- The Flexco Manual Pull-Out Step for RVs - Single - 7-1/2" Drop/Rise - 24" Wide - 350 lbs # SMFP-1100
view full answer... - Step Height of TorkLift GlowStep Revolution RV Scissor Steps
- From the mounting surface of where the Torklift Steps part # TLA8004 attaches down to the first step measures 3 inches in the highest setting. There is also a 3 way adjustment you can make for the position of the step that will change that distance. Highest is 3 inches, middle is 5 inches, and lowest is 7 inches.
The distance between each step is 7-1/2 inches.
view full answer... - What Is Weight Capacity Of Lippert Kwikee 28 Single Electric Step - Item # LC3747453
- The Lippert Components Kwikee 28 Series Single Electric Step, Item # LC3747453, is a heavy-gauge steel step that supports up to 750-lbs. You should not have any problems and will work well for you.
I have attached a video for you to check out.
view full answer... - What is Weight Difference Between Brophy Scissor Steps AS02 and SS02
- The shipping weight difference is that the # SS02 weighs 20 lbs and the # AS02 weighs 12 lbs.
view full answer... - Dimensions of the Brophy Aluminum Scissor Steps Part AS04
- The shipping weight for the Brophy aluminum scissor steps # AS04 is 20.72 pounds. The step size is 18 inches x 6 inches deep and vertical height measures between 31 and 39 inches high. These steps have a weight capacity of 250 pounds.
The weight capacity is the main difference between the Brophy steps # AS04 and # SS04 as the steel steps will have a 300 pound weight capacity.
The dimensions of the box they are shipped in are 17-1/8 inches height by 18-3/4 inches width by 9-3/4 deep.
view full answer... - What is the Retracted Height of the Brophy Scissor Steps # SS02
- I spoke with my contact at Brophy about scissor steps # SS02. The retracted height is approximately 10 inches when installed. When extended, the height is 24 to 31 inches.
These steps are designed as a universal fit item so they will most likely not fit the factory step mount and you will need to drill to mount them.
view full answer... - Mounting Bracket Spacing of Flexco Manual Pull-Out
- The Flexco Manual Pull-Out Step for RVs - Single - 3" Drop/Rise - 24" Wide - 300 lbs # SMFP-1200 measures 23-1/4" center to center between its mounting holes; additionally, it is 25" from outside to outside of the mounting brackets and 22" from inside to inside of the mounting brackets.
I have added a link to a video review of these steps for you to check out as well.
view full answer... - Rise and Run on Lippert Manual Pull-Out Steps # LC432687
- The Lippert Manual Pull-Out Steps # LC432687 that you referenced features a rise/drop of 7 inches, which refers to the distance/height between each step. The run is just the width of the step, which is 8-3/4 inches on this assembly. I have attached an image to assist.
view full answer... - Dimensions and Weight of the Econo Porch Trailer Step # EHS-102-R
- The Econo Porch Trailer Step # EHS-102-R weighs right at 50 lbs. It does not fold, but it's dimensions minus the hand rail are 21 inches tall, 27 inches wide, by 34 inches deep.
I attached a review video for you to check out as well.
The hand rail dimensions are 25 inches deep x 37 inches tall (front) x 44 inches tall (back)
view full answer... - Mounting Bracket Height Recommendation for the TorkLift GlowStep Scissor Steps # TLA7804
- Torklift recommends that the mounting bracket height for the TorkLift GlowStep Scissor Steps # TLA7804 be right at 34-1/2 inches.
view full answer... - Weight of Brophy Aluminum and Steel Scissor Steps
- The Aluminum Scissor Steps # AS03 that you referenced weigh 15 lbs and the Scissor Steps # SS03 weigh 29 lbs.
As you can see, aluminum is much lighter.
view full answer... - Mounting Bracket Dimensions for the Scissor Steps part # AS24
- The width of the overall step of the # AS24 is 24 inches. I attached a picture that shows the dimensions of the included bracket as well. It is 1 inch tall and is 24 inches in length. You would need compare these dimensions to the area you plan to use to attach the steps.
view full answer... - Height Range for the Brophy Three Step AS23
- The Three Step Brophy part # AS23 has a height range of 24 and 30 inches. If the area where you need stairs is between those measurements then these steps would work well for you.
view full answer... - How Much Does Econo Porch Trailer Double-Step with Handrail and Landing Weigh When Folded
- I contacted the manufacturer and the Econo Porch Trailer Double-Step With Handrail, Item # EHS-102-R, will weigh around 45 pounds when folded up. When they are folded, the dimensions are approximately 47 inches by 35 inches and they are approximately 1-1/2 inches wide.
Please contact me if I can help with any other questions.
view full answer... - What is the Weight of the TorkLift GlowStep Revolution Scissor Steps # TLA8003
- The TorkLift GlowStep Revolution Scissor Steps # TLA8003 have a shipping weight of 55 lbs. you will just need to subtract a few pounds to get the weight of the actual steps.
They have a weight capacity of 350 lbs, but when you install the TorkLift GlowGuide Handrail # TLA7621 that increases to 375 lbs.
I have attached a review video for you to check out as well.
view full answer... - Overall Width of TorkLift GlowStep Camper Scissor Steps w/Landing Gear TLA7802-8000
- According to TorkLift the overall width of TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 2 Steps - 20" Wide - 350 lbs Item # TLA7802-8000 is 21 inches.
view full answer... - Dimensions of Flexco Manual Pull-Out Steps for RVs # SMFP-4400
- The bolt to bolt distance on the Flexco Manual Pull-Out Steps for RVs, # SMFP-4400, measures 28-1/8 inches and the sliding bolt at it's highest point is approximately 3-1/2 inches below the mounting base. I have attached a dimensional diagram for you.
view full answer... - TorkLift Step Options for a Truck Camper on a 2017 Ram 3500
- We do have a couple of different options for you from TorkLift.
The TorkLift GlowStep Camper Scissor Steps # TLA7806-8000 comes with the landing gear, has a weight capacity of 350 lbs, a mounting bracket height of 49-1/2 inches, and each step is 8 inches deep which means it will extend out about 48 inches. The mounting bracket is sold separately and can be found both in Black # TLA7810 and White # TLA7820.
The TorkLift GlowStep Stow N' Go Scissor Steps # TLA7836 also comes with a...
view full answer... - Will Step Outriggers have to be Modified to Use Lippert Steps with Taller Frame
- On Lippert steps # LC432682 from the top of the mounting surface to the top of the channel the top step slides in measures approximately 5-1/4 inches so it does appear that your outriggers are a little too long.
view full answer... - What Does the Bracket Height Measurement Mean for TorkLift GlowStep Stow N Go Scissor Steps
- The mounting bracket height you see listed for the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7836 is the ideal distance from where the bracket will mount below the door threshold to the ground. Based on the height clearance you mentioned this set of steps would be too tall.
The 5-step model, # TLA7835, is almost exactly the height you need.
view full answer... - Dimension of Mounting Bracket for Brophy Camper Scissor Step SS04
- I went to our warehouse to measure the mounting bracket for Brophy Camper Scissor Step # SS04.
The mounting bracket has an overall length of 18-1/8-inches. Each side of the V-shaped bracket measures 1-inch. The mounting holes are 5/8-inch diameter and their centers are spaced apart by 5-1/4-inches.
Please note this step unit is not meant for permanent installation; it is intended to be installed upon arrival at your destination and removed prior to continued travel. The bracket mounts...
view full answer... - Overall Side To Side Dimensions Of Flexco Manual Pull-Out Steps
- The problem is that the overall measurement at 27-5/8 inches is from the end of the rod that extends out on both sides. The 26-1/8 inches is the dimension of the mounting brackets at the top of the steps.
I have attached a photo with dimension noted of the Flexco Manual Pull-Out Steps # SMFP-2100 you can check out.
view full answer... - Folded Dimensions and Ease of Use for Camco Folding Step Stool # CAM43672
- The Camco Folding Step Stool # CAM43672 referenced in your question is extremely easy to fold up for storage and is done by simply lifting up on the latches on the sides of the ladder. When folded, the step platform will have a length of 14 inches and a width of 6-1/4 inches. The overall length including the legs when folded will be 13 inches. With its compact size and light weight of just around 2 pounds, this will be perfect for use around your office.
I have attached an image with...
view full answer... - Dimensions and Brackets For The Triple Rise Manual RV Steps
- The Stromberg Carlson Flexco Manual Pull-Out Steps for RVs - Triple - 9" Drop/Rise - 24" Wide - 350 lbs, # SMFP-3200L, is a great product. The folded up measurements are 16-3/16 inch tall x 12 inches wide x 25-3/8 inches long. I've attached a picture to give clarity. I've also attached a review video for you.
The mounting points are included in the design with 6 bolt holes. Pre-drilled holes on the top mounting base match up to factory holes on the bottom of many RV's. The hardware...
view full answer... - Larger Mounting Options for Lippert Steps
- Good news, I can help you find a wider step than the 24 inch LC341504.
I've linked all the steps for you but if you look through the filters there should be a measurement column and there are sizes from 14 inches to 30 inches wide. The Lippert Steps are made for RVs which is why they are the 24 inch wide spread. I have something similar that may work for you that has brackets that have a variety of widths.
The TorkLift Glow Step has a variety of steps like the # TLA7803-8000 that...
view full answer... - Actual Weight of Brophy Aluminum Camper Scissor Step AS04
- The Brophy Camper Scissor Step # AS04 features very lightweight construction thanks to the use of aluminum. This entire step assembly weighs in at just under 20-lbs. The similar steel step unit # SS04 weighs in at more than 50-percent heavier, about 31-lbs.
If you like you can add handrail assembly # AHR4 which weighs approximately 6-lbs.
view full answer... - Dimensions for TorkLift GlowStep Scissor Steps and Ability to Utilize Same Bracket
- The TorkLift GlowStep Camper Scissor Steps - 2 Steps - Aluminum - 20" Wide - 375 lbs # TLA7802 uses a mounting bracket that is 21-1/2" wide x 8-9-/16" deep. It is intended for an entry height of between 16 and 23 inches. This step weighs 16 lbs.
The 3 step # TLA7803 will use the same bracket so they are interchangeable. It is designed for entry heights between 23-1/2 and 30-1/2 inches. This step weighs 22 lbs.
You may want to consider the Pin Lock for TorkLift GlowStep Scissor...
view full answer... - Dimensions Of Flexco Manual Pull-Out Steps For Travel Trailer Two Step
- The 26-1/8 inches wide at the top is correct and the mounting holes at 24-1/4 x 7 inches are correct for the Flexco Manual Pull-Out Steps for RVs # SMFP-2100. The total width of 27-5/8 inches has to do with the end of the Rod that extends out both sides. I've attached pictures to assist with all the measurements.
view full answer... - Dimensions and Installation of Lippert Kwikee Step on Ford 350 Series Bus
- The Lippert Kwikee 30 Series Electric Step - 1 Step - 7-1/2" Drop/Rise - 36" Wide - 300 lbs # LC3694112 will have a retracted height of 7.25 inches and an extended height of 11.88 inches. This unit comes with a door switch to extend when opened and retract when closed.
This unit can mount to the floor of your bus or it can mount to outriggers like # LC301704 using hardware # LC118155-72. You will need a 12V power supply to the system, so I recommend using wire # 10-1-1 sold by the...
view full answer... - Mounting Hole Spacing for Lippert Manual 3-Step Pull-Out Steps for Keystone Montanta
- Lippert Manual Pull-Out Steps - Triple - 7" Drop/Rise - 25-3/4" Wide # LC432687 has mounting holes that are spaced 7 inches apart on center front to back and 26-1/4 inches on center left to right. It sounds like for these to fit some new holes would have to be drilled. That is going to be the case for all of the steps.
view full answer... - Dimensions Of Kwikee Electric RV Step 40 Series Complete Assembly
- I have the measurements of the Kwikee Electric RV Step Complete Assembly # LC3726892 you are looking for.
From the top of the top of the mounting bracket to the bottom of the bottom step is 17-3/8", from the top step to the top of mounting bracket is 7.13", when full extended the overall depth from the back of the mounting step to the front of the bottom step is 33-5/8".
I included a diagram of all of the measurements of the Kwikee Electric RV Step # LC3726892 for you to take a look...
view full answer... - What Is Package Size And Shipping Weight For Brophy Steel Scissor Steps # SS04
- I went to our warehouse and measured the box that the Brophy Steel Scissor Steps, part # SS04 are packaged in.
The box measures 10 inches wide, 19 inches long, and 13 inches tall. The shipping weight for these steps is 34.17 lbs. The step size for this item is 18 inches wide and 6 inches deep. These steps have a weight capacity of 300 lbs. When retracted, these steps measure 11 inches tall.
For added safety I recommend the Non-Slip Adhesive Safety Strips, part # NSAS. These are...
view full answer... - Dimensions of TorkLift Replacement Pull-Out RV Scissor Step TLA8003
- My TorkLift contact advised that on their GlowStep Revolution Scissor Step # TLA8003 the distance from the top of the frame bracket down to the top step is 7-inches. Unlike most others this step offers some adjustability.
If you are at a campsite that does not allow you to fully extend the step unit it is still perfectly fine to use it when only partially extended. I confirmed with TorkLift.
I would like to mention an item that often helps RV-ers with pets, especially older pets (as...
view full answer... - Collapsed Dimensions of Brophy Aluminum Scissor Steps # AS05
- I went out into our warehouse and grabbed a Aluminum Scissor Steps # AS05 to measure and found that they are 17-3/4 inches tall by 18-1/4 inches wide and 10 inches deep.
I attached a picture that has all of the dimensions shown.
view full answer... - How Much do Econo Porch Trailer Step with Handrail and Landing # EHS-102-R Weigh
- The shipping weight on the Econo Porch Trailer Step with Handrail and Landing # EHS-102-R is 54 pounds so subtracting the packaging you are looking at approximately 50 pounds.
view full answer... - What is the Width of the Lippert Manual Pull-Out Step LC432682
- The 27-1/2 inch measurement is a diagonal measurement from the front of the mounting surface to the front of the bottom step when it is pulled out. The 25-1/4 inch measurement is the overall width. The mounting holes are 24 inches apart on center.
view full answer... - Weight Capacity for the Econo Porch Trailer Step with Handrail and Landing # EHS-102-R
- The weight capacity of the Econo Porch Trailer Step with Handrail and Landing # EHS-102-R that you referenced is 350 lbs.
view full answer... - Weight and Installation of TorkLift GlowStep RV Scissor Steps # TLA7505
- The TorkLift GlowStep RV Scissor Steps # TLA7505 have a shipping weight of 30-lbs, so their actual weight will be right around 27-lbs. When extended the step's mounting bracket will be 42-inches above ground so this should work well with your mounting point that is 38-inches from the ground. When the steps are collapsed in for travel they will extend down from the mounting surface approximately 12 to 13-inches. The steps themselves are 20-inches wide, not including the scissor brackets...
view full answer... - What Is Distance When Brophy RV And Camper Scissor Steps Item # SS04 Are Fully Extended
- I called the manufacturer to check on the overall dimensions needed to fully extend the Brophy Camper Scissor 4 Steps, Item # SS04. They said the Brophy steps need approximately 32 inches of vertical space from top step to bottom step to fully extend. When fully expanding the steps, the height will expand from 31 inches to 40 inches depending on your need.
I have attached a video for you to check out.
view full answer... - What Is the Weight Capacity of the SolidStep Manual Fold-Down Steps
- The SolidStep Manual Fold-Down Steps like part # LC698799 have a 400 lb weight capacity.
view full answer... - Aluminum Scissor Steps and Hand Rail Measurements
- You are correct the Aluminum Scissor Steps, 24 inches Wide, 31-39 inches Tall, part # AS24, can be fully extended to 39 inches tall, or can be slightly compressed so that they measure 31 inches tall. You will need to measure from the ground to the bottom of your camper door to see what height you need. We do sell the matching handrail, it is the Aluminum Hand Rail for 4 Step Scissor Stair, item # AHR4 and it is custom fit to these stairs.
view full answer... - Weight Capacity of TorkLift Steps Part # TLA7844, Part # TLA7804, and Part # TLA7504
- The TorkLift GlowStep Stow N' Go # TLA7844 weighs just over 30 (about 32) lbs by itself.
The TorkLift GlowStep part # TLA7804 and part # TLA7504 both weigh a little over 20 (about 22) lbs each.
view full answer... - Dimensions of TorkLift GlowStep 3 Step RV Steps When Folded Up
- The TorkLift GlowStep 3 Step RV Steps # TLA7503-8000 are approximately 20 inches wide, 6 inches deep, and 14 inches tall when collapsed in the stored position. When they're folded the hinges keep them locked in place plus there is additional security with a pin.
view full answer... - Bolt Hole Measurements on Flexco Pull
- The Flexco steps, part # SMFP-2120, have six holes on each side. The top set is 4-1/2 inches center on center and both the lower sets are 9-1/2 inches.
Additionally the top holes measure 7 inches center on center between the bolt holes front to back and are 20-1/2 inches across.
view full answer... - Flexco Double Step Width Dimensions
- The 23-5/8 inch width is the widest point and is actually for the metal rod. The bracket width is 22-1/8 inches from edge to edge. I measured this product for you to confirm and have attached a photo to assist.
view full answer... - What are the Dimensions of the Stromberg Carlson Platform Step in the 3 inch Height
- I pulled a Adjustable-Height Platform Step # PA-100 from our warehouse to measure the outside dimensions of the legs when it is in the 3 in height and found the dimensions to be 19-1/8 inches by 15-1/4 inches.
Check out the video I put together for you so you can see the measurements.
view full answer... - Can Econo Porch Trailer Step with Handrail # EHS-103-R be Used on Fifth Wheel That Sits Higher
- The top landing on the Econo Porch Trailer Step with Handrail, # EHS-103-R, sits at 28 inches high. If your fifth wheel trailer sits approximately 7 inches higher, you are correct, it would take one more step to enter your trailer.
Please do keep in mind that the hand rail ends at the landing so you would not have one for that last step into the trailer. Other than that, you should have no problems using these steps for your fifth wheel.
view full answer...
Go To Results