bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Boat Accessories


  • Which Classic Accessories Boat Cover Will Fit 1974 Tahiti 18 Foot Boat With Outboard Motor
  • I contacted our representative at Classic Accessories and he recommend a Model C Cover, which fits boats 16 feet to 18-1/2 feet long.
    view full answer...

  • Classic Accessories Boat Cover Fit Information for a 2002 Fourwinns Horizon 180 Boat
  • To determine if this Classic Accessories Boat Cover # 052963889482 will fit on your 2002 Fourwinns Horizon 180 you will need to take some measurements of your boat. This cover is designed to fit boats that are 17 to 19 feet in length and boats with beam widths up to 102 inches. If you measure the length and width of your boat and it fits in those measurements this cover should work for you. If not, email me back with the measurements of your boat and I can hopefully find one that does fit.
    view full answer...

  • Will Classic Accessories Boat Cover Fit on Boat Without a Windshield?
  • The Classic Accessories Boat Cover by StormPro # 052963889185 fits 14 -16 foot boats with a beam width up to 75 inches. Since your boat meets those dimensions, the fact that it does not have a windshield is not going to affect how the cover fits. It features an integrated buckle and adjustable strap system as well as an adjustable elastic cord at the bottom of the cover to ensure a tight fit over your boat.
    view full answer...

  • Boat Cover for a 14 Foot Long and 96 Inch Wide Boat with Cuddy Cabin and 15 Inch Bow Rails
  • Your boat at 19 feet and 96 inch beam length is within the tolerances of the Classic Accessories Boat Cover, # 052963889581. As far as width, it fits up to 106 inch wide boats. the extra foot of length should not be a hindrance either. A similar cover that fits 17 to 19 foot boats and beam widths up to 102 inches is # 052963889482. This would be a tighter fit to your boat. I think the bow rails and the cuddy cabin would necessitate the larger cover though.
    view full answer...

  • Will Classic Accessories StormPro Boat Cover # 052963889383 Fit 18-1/2-Foot Lund Boat
  • I checked the beam width of a number of 18-foot Lund boats and they fall into the range of 88- to 98-inches. Since the Classic Accessories StormPro Boat Cover # 052963889383 fits boat lengths to 18-1/2-feet and beam widths to 98-inches it will work fine on the Lund boat. Since this craft is at the top of the covers size range, and since the cover has an elastic cord in the bottom hem, the fit should be snug and wrinkle-free.
    view full answer...

  • Will Classic Accessories Boat Cover 052963889581 Fit 1997 Crownline 210 CCR 21 foot Boat
  • As long as your Crown Live is not wider than 106 inches the Classic Accessories Boat Cover by StormPro # 052963889581 is an excellent option as it has a boat length range of 20-22 feet.
    view full answer...

  • Would the Classic Accessories Boat Cover # 052963889482 Work with an I/O Motor
  • The Classic Accessories Boat Cover # 052963889482 should have no problem being used with an inboard/outboard motor as long as the dimensions of the boat are compatible with the cover. This cover is designed for V-hull runabouts that are between 17-19 feet in length and a beam width of up to 102 inches. I attached installation instructions for you to check out also.
    view full answer...

  • Fitment Of Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 On 12' Boat
  • The Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 is designed to fit snuggly on a 12'-14' v-hull boat. The width of the boat should not exceed 68" at the widest point. You want the cover to fit snug so that any wind that hits the boat will not allow the cover to move and possibly chafe, creating wear or damage to the cover. For the outboard motor I recommend finding a cover that will encase the entire outboard. This will help prevent any critters from building nests...
    view full answer...

  • Will Classic Accessories Boat Cover 052963889185 Fit a 15 Foot Sylvan Alaskan
  • Yes, the Classic Accessories boat cover # 052963889185 will work with your 15 foot Sylvan Alaskan as you have described it. The cover is designed for 14 to 16 foot long V-hull boats with a beam up to 75 inches. Your boat is right in the middle of all those specs so you should have a great fit!
    view full answer...

  • What Holds The Rear of the Classic Accessories DryGuard Waterproof Boat Cover # CA20085 In Place?
  • The Classic Accessories DryGuard Waterproof Boat Cover # CA20085 has 2 straps at the rear of the trailer to help hold it in place. I do recommend getting a Support Pole # 36911981 to help prevent water and dirt from pooling up inside the boat. We do not have any straps which would be able to be used with the cover that would not risk damage to the cover material.
    view full answer...

  • Roadmaster Spare Tire Carrier Compatibility with Towing 5,000 lb Boat
  • The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening - 2" Hitches # RM-195225 you referenced is rated to have a maximum tongue weight of 400 lbs. This is not to be used for towing a trailer but rather only for a hitch mounted accessory or flat towing a vehicle. If the tongue weight exceeds the 400 lbs, it is also not recommended to use this accessory. To safely tow your boat you will need to utilize another style of spare tire carrier or remove the spare tire carrier...
    view full answer...

  • Can Classic Accessories 9' Pontoon Boat CA69660 Accept Electric Trolling Motor
  • Yes, the Classic Accessories 9' Pontoon Boat # CA69660 includes a 2-position trolling motor mount along with oars and a cargo basket to hold your trolling motor battery, tackle box and beer cooler. It also features an adjustable seat, oar locks and foot rests so you can be comfy while catching your dinner. The boat consists of three main parts (the two pontoons and the central tubular steel seat frame) so you will be able to easily handle each part separately. In total the boat weighs...
    view full answer...

  • Recommended Boat Cover for 16 ft Tri-Hull Crestliner
  • The Classic Accessories DryGuard Waterproof Boat Cover, part # CA20084 would be a good choice for you. The cover fits boats up to 16 feet long and a beam width up to 90 inches.
    view full answer...

  • What is Classic Accessories' DryGuard Fabric and Will DryGuard Cover CA20085 Fit 17-Foot Bayliner
  • The 17-foot, 9-inch length of your 2007 Bayliner will be fine with the Classic Accessories DryGuard Waterproof Boat Cover # CA20085 so you'll just want to measure the boat's beam (width at the widest point) to confirm it does not exceed the 98-inch maximum for the cover. It will fit fine with your windshield. If you find you need a slightly larger cover you can use DryGuard cover # CA20086 which fits boats up to 19-feet long and up to a 102-inch beam. The DryGuard material is a 300-denier...
    view full answer...

  • Roller Accessory for Rhino-Rack Pioneer Platform Racks
  • The Roller Accessory # RR43129 will not scratch your boat when loading up. I would not be concerned with that at all. The bolt sits in the center of the roller on the outside. The only bolt that may make contact is the carriage bolt on top but the smooth part is facing up. If it does make contact, it will not gouge the bottom of your boat. The bolts that mount the bracket to the rack is a carriage bolt, it has a smooth head so it will not scratch the bottom of your boat either. No worries!
    view full answer...

  • Pontoon Boat Cover for a 22 ft Ponton Boat
  • The Classic Accessories # CA20028 cover is a universal fit on pontoons that are 21 to 24 feet long and have a beam width of up to 96 inches. You will need to measure the width of your pontoon at the widest point the cover will be required to cover and as long as the measurement is 96 inches or less this cover should work for you. This cover is appropriate for trailering or for storage.
    view full answer...

  • Can the Deka Battery Isolator DW08770 Be Used On a Boat
  • Yes, the Deka Battery Isolator part # DW08770 can be used on a boat to separate the starter and auxiliary battery but you would need to mount it in a location that is least likely to get wet, like in a battery box, the NOCO Snap-Top Battery Box with Strap part # 329-HM318BKS.
    view full answer...

  • Will Classic Accessories 17 to 19 Foot Long V-Hull Boat Cover Fit a 2002 Monark King 190
  • Like you said, the Classic Accessories cover # CA20086 fits 17 to 19 foot long V-hull boats. It also fits beams up to 102 inches wide. It does not seem like width would be an issue. Provided the cover supports you have do not reach up higher than the wind screen, if applicable, then I do not foresee there being a problem. You could step up to the next highest size, # CA20087, which fits 20 to 22 inch long V-hull boats and beams up to 106 inches. But if it is too large it would not fit...
    view full answer...

  • Trailerable Boat Cover for 22 Foot Suntracker Party Barge
  • I do have a solution for you but the cover you referenced Taylor Made Eclipse Pontoon Boat Cover item # 36970912 is not for trailering. I recommend the Classic Accessories StormPro Pontoon Boat Cover item # CA20028, this cover is rated for both storing and hauling your 2015 Suntracker Party Barge 22foot DLX. The cover fits boats from 21' - 24' long and 96" wide at the widest point of boat.
    view full answer...

  • Trailer Hitch Compatability for a 1997 Chevrolet Blazer
  • Yes, the Curt Class III Trailer Hitch, item # 13020, will fit the 1995 to 2005 Chevy/GMC Blazer and Jimmy S-10 and S-15 vehicles, either 2 or 4 door. Since you have the Hitch accessories you should be pretty well set up. You may need wiring for your 1997 Blazer. If so the recommended wiring is the 4-Pole Hardwire Kit Including Circuit Tester, item # 18252. Make sure to check the weight capacities of your vehicle the hitch and your accessories to be sure that towing the boat you mentioned...
    view full answer...