bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Grand Design RV Cargo Carrier


  • Do Cargo Carriers Have to be Rated for Use on the Back of an RV
  • Although a bike rack must be rated for use on the back of an RV, a cargo carrier does not. The 24x60 Curt Cargo Carrier part # C18152 will work for you. This carrier has less moving parts than folding versions which is ideal for use on the back of an RV because bike racks and cargo carriers mounted on the back of an RV have much more movement and stress in comparison to bike racks and cargo carries attached to the rear of a passenger vehicle due to the distance from the carrier to the axle. The...
    view full answer...

  • Spare Tire Carrier Capable Of Being Mounted To an RV Cargo Carrier
  • With most RV bumper mounted cargo carriers I find the Offset Trailer Spare Tire Carrier # DL22120 as being a great option to hang the spare tire off the back of the carrier. This has an offset to raise the spare tire up and reduce the chances of it dragging on the ground on steep driveways. You will likely need shorter mounting bolts as the ones included are designed to fit a frame up to 3" wide.
    view full answer...

  • Will The etrailer Cargo Carrier For RV Bumpers Fit A 2-1/2" RV Bumper
  • No, the 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR requires a 4" x 4" or 4-1/2" wide x 4" high bumper for installation. The alternative to this would be to use a hitch mounted cargo carrier like the 24x60 etrailer Cargo Carrier for 2" Hitches # e98874. If you don't have a 2" hitch on your RV then you can install an adjustable fit hitch like the Curt Trailer Hitch Receiver for RVs # C13704. This hitch fits a frame width of 22" to 66" Wide. To know what your frame width is you'll...
    view full answer...

  • Fitment of 24x84 etrailer Cargo Carrier for RV Bumper to 2019 Vanleigh Beacon Fifth Wheel
  • If you can fit the brackets onto your bumper, the 24x84 etrailer Cargo Carrier for RV Bumper, # e96ZR will work for your application. If the fit is too close to the body of the RV, you will not be able to fold up, but many that use this cargo carrier never fold it up even if option is there.
    view full answer...

  • Is 24x40 etrailer Cargo Carrier for RV Bumper Long Enough to Carry 2 Adult Bikes
  • Adult bicycles can vary in size, but generally speaking, the 40 inch inside width of the 24x40 etrailer Cargo Carrier for RV Bumper # e99050 won't be wide enough to carry a pair of bikes, so you'd need the 24" Extension for etrailer Bumper Mounted RV Cargo Carrier # e99052. That said, with the open floor design of Cargo Carrier # e99050 it will be difficult to get bikes to properly mount in the carrier, so if your only goal is to use this to carry bikes, a better option would be a bumper-mounted...
    view full answer...

  • Recommended Small Bumper Mounted Cargo Carrier
  • The 24x40 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500lbs # e99050 is the smallest version of our cargo carriers but we do offer the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200lbs # MNT54FR which is 24" x 24" and utilizes the same mounting design.
    view full answer...

  • Will the 24x40 etrailer Cargo Carrier for RV Bumper Work with a Folding E-Bike
  • The 24x40 etrailer Cargo Carrier for RV Bumper part # e99050 has interior dimensions of 40" wide x 24" deep and capacity of 500 lbs so as long as your folding bike meets these criteria then it will be a great fit. If you're referring to the 24" Extension for etrailer Bumper Mounted RV Cargo Carrier part # e99052, this will need to be purchased separately.
    view full answer...

  • Will Curt Trailer Hitch and Cargo Carrier Work on Trailer With 4 Inch Bumper
  • The Stromberg Carlson Cargo Carrier # CC-100 can absolutely be used with a Curt bumper mounted hitch on your 2017 Keystone Cougar 26RLS to carry a max of 200 lbs of cargo. Since you mentioned you have a 4 inch metal bumper the correct hitch is likely the Curt RV Bumper 2" Trailer Hitch # E-100 which is a fit for a 4" x 4" square bumper; the Curt RV Bumper Hitch # C19101 is the other bumper mounted hitch for RVs and is for use with 2" x 4" RV bumpers so you will want to use the one that...
    view full answer...

  • Can Spare Tire Fit Under etrailer Cargo Carrier for RV Bumper
  • There isn't a way to mount a spare tire directly under the 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR. What you can do if you have enough space on the bumper is add a bumper-mounted spare tire carrier next to the cargo carrier with the Brophy Rigid Mount Spare Tire Carrier # BR56VR or Folding, Bumper Mounted Tire Carrier # TR-2. If you don't have quite enough room with the 84 inch wide cargo carrier, there is a smaller carrier as well, the 24x60 etrailer Cargo Carrier for RV Bumper...
    view full answer...

  • Space Needed To Fold The etrailer Cargo Carrier Up When Not In Use
  • The 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR is going to fold up and sit on top of the mounting brackets, so anything that would sit above the bumper of your 2022 Jayco Redhawk Class C Motorhome is going to interfere with the cargo carrier's ability to fold up. The cargo carrier is going to require 4" of space, which is most likely the size of your bumper so as long as the ladder sits behind the bumper you'll have no issues.
    view full answer...

  • Will etrailer Cargo Carrier # e99049 Work with Grand Design 2800 BH?
  • The 24x60 etrailer Cargo Carrier for RV Bumper # e99049 is a great option for a cargo carrier for use with an RV. It fits 4" x 4" and 4-1/2" x 4" RV bumpers and can hold up to 500 lbs. As long as the bumper on your Grand Design 2800 BH matches those specs, this cargo carrier will work well. Note that your manufacturer may have a weight rating for your bumper that is less than this, so whichever weight rating is lower is the limiting factor. Check out the video linked below for more details...
    view full answer...

  • Will A Bumper Mounted RV Cargo Carrier Attach To A Trailer Hitch On A 5th Wheel Trailer
  • The 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR is designed for 4" x 4" bumper tubes so this particular cargo carrier wouldn't be a compatible fit to attach to your trailer hitch crosstube. Instead I recommend a hitch mounted cargo carrier option like the 24x60 Reese Cargo Carrier for 2" Hitches # 63153. Hitch mounted carriers will slide right into the receiver tube of your trailer hitch and secure with a hitch pin for a fast and convenient carrier option.
    view full answer...

  • Determining Fit of Folding etrailer Cargo Carrier for RVs
  • The etrailer RV cargo carrier # e96ZR fits on bumpers that stand away from the RV and aren't tucked under it. As long as yours isn't underneath the RV's body then the carrier will work for you.
    view full answer...

  • Hitch Adapters & RV-Rated Bike and Cargo Carriers
  • Any cargo carrier or bike rack that will be used on the rear of a RV (trailer or motorhome) needs to be rated for that application since the stress forces found at the rear of a trailer or MH are much greater than at the back of a standard passenger car. A standard bike rack made for use on a car cannot be used on the back of a Class C motorhome; you need an RV-rated rack like your Swagman Trailhead # S63381. The same applies to a hitch cargo carrier like your Curt # C18152. Although we...
    view full answer...

  • Will the etrailer Cargo Carrier for RV Bumper Work Without a Bumper or What Options Are There
  • I have an alternate option for you, but the 24x60 etrailer Cargo Carrier for RV Bumper # e99049 is designed to be used with RV bumpers, since you do not have a bumper this will not work for your E-Pro by Forest River. Instead, you would want to look at a hitch mounted cargo carrier like the 24x60 etrailer Cargo Carrier for 2" Hitches # e98874. If your RV does not have a hitch, I have provided a couple options below depending on your frame width. If your trailer frame is 18"-51" Wide -...
    view full answer...

  • Cargo Carrier Recommendation For A Keystone Outback With A Recessed Bumper
  • Since you have a recessed bumper on your Keystone Outback, instead of using the 24x60 etrailer Cargo Carrier for RV Bumper # e99049 I recommend going with the: -24x40 etrailer Cargo Carrier for RV Bumper # e99050. This cargo carrier will work better for a recessed bumper since it mounts to the side of the bumper rather than the top of the bumper.
    view full answer...

  • Installation Tips For An RV Ladder On A 2016 Forest River Cherokee Grey Wolf Travel Trailer
  • Typically the only modifications we see for RV Ladders like the # SP501L is RV'ers cutting them down in size to fit their RV. For people who have fold up cargo carriers or spare tire carriers in the way they'll usually just cut the ladder down to fit just above where the carrier sits.
    view full answer...

  • Can Thule Transporter Tilting Cargo Carrier # TH665C Be Used on the Back of RV
  • The Thule Transporter Hitch-Mount Cargo Carrier # TH665C tilts back about 5-inches from its normal transport position as shown in the linked diagram. However, this hitch-mount carrier is intended for use only on the back of automobiles, not on RVs. If mounted on the back of an RV it would be subjected to forces that could damage it. The longer the distance from the rear axle to the back of the RV the more stresses will be placed on any hitch-mount item. While we do offer specialty bike...
    view full answer...

  • Recommended Cargo Carrier for RV to Carry Liberty Electric Tricycle
  • I'll start off by saying that because of the extra movement that can occur at the rear of an RV, you can only use a cargo carrier with a solid shank in the receiver on the back of your 2005 Class C on a Sprinter chassis; this also means that you're not going to be able to find a cargo carrier with a shank rise. I have a solution, but the Stromberg Carlson # CC-100 is only 23" inside to inside, so I think it's going to be a tad bit too small. I recommend using the Reese Solo Cargo Carrier...
    view full answer...

  • RV Cargo Carrier Solution For A Trailer That Has A Deeper Bumper
  • Thanks for the picture, and the measurements! I took a look at your bumper, and it doesn't appear that the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers # MNT54FR will be a good fit for you. This cargo carrier will fit square and rectangular RV bumpers with a maximum depth of 6", and since you mentioned that your bumper is a notch over 7", this will not work. The best option I can offer for you, is to use a hitch mounted cargo carrier like the 22-1/2x49 Curt Cargo Carrier...
    view full answer...