bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about RV and Camper Steps


  • MORryde StepAbove Fold-Down Steps for 2018 Montana Fifth Wheel
  • Since the distance from your threshold to the ground is 38", and the narrowest part of your door is 28-1/4" side-to-side, the MORryde steps that are a fit for you are the MORryde # MR28RR steps featuring 8" deep steps. Optionally you could also use the MORryde # MR85RR steps which are the same as the MR28RR's except they feature gas lift struts that allow you to lift of lower the steps with one finger! If these steps are replacing traditional fold in steps you should consider the...
    view full answer...

  • Lippert SolidStep Fit for 28 Inch Wide Door and 38 Inch Entry Height
  • The best Lippert SolidStep for you RV with a door frame that measures 28 inches and an entry height of 38 inches is the SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames # LC791574, which, as you can see by the name of the product, is perfect for your 28 inch door frame. It is also designed to fit entry heights between 35 inches and 44 inches, which it can do because it has adjustable let extensions. These steps do not come with mounting hardware but you will only need...
    view full answer...

  • Will Screen Door and Entry Door Close Normally with SolidSteps in Place?
  • When the Lippert # LC791572 steps are properly installed with the threshold plate firmly against the outside threshold you should have no issues. The only thing we hear from customers is how much they love them! While you have your tools out you might as well take down those old stock rattle-trap steps that came stock on your trailer and install the Lippert # LC664640 locking steel box just made to fit in the spot where the steps were. Great spot for black water supplies, or roadside...
    view full answer...

  • Lippert SolidSteps for 2021 Forest River Surveyor Legend 18RBLE
  • To measure for fit of the Lippert SolidStep, measure the entry way from right to left at the narrowest point. Generally there will be a flat metal flange that extends out 1/2" all around. This is the flange that the door closes against and keeps the door from trying to swing inside. From that measurement, round up to the next even inch. So, your door (at the narrowest point) is 21-1/4" wide to the door flange, and rounded up we get 23". The narrowest width for solid steps is 24 inches....
    view full answer...

  • How Much Clearance is Needed Between Entry Door and Threshold of RV for MORryde StepAbove
  • The standard clearance requirement for the MORryde StepAbove RV steps like part # MR88RR is 3/8 of an inch which is the same for the # MR28RR.
    view full answer...

  • Do MORryde StepAbove RV Steps MR26RR Fit 24 Inch Wide Doorway
  • The doorway width - the width from flange to flange of your doorway - needs to be between 23-3/4 inches and 26-1/4 inches, so yes, your 24 inch door will allow you to use the MORryde steps you asked about, which are the following part number: - MORryde StepAbove RV Steps - 2 Steps # MR26RR The only other thing you need to be sure of is the entry height (which is measured from the doorway threshold on your camper to the ground), as the # MR26RR is for entry heights measuring from 25...
    view full answer...

  • Handrail For Use With Lippert SolidStep Entry Steps
  • We do have handrails that are going to allow for an easier way for your mom to get up the steps and into your 2016 Heartland Cyclone, the issue with changing from the Lippert SolidStep Manual Fold-Down Steps # LC791574 to a TorkLift GlowStep is the mounting brackets because none of the GlowSteps share the same mounting bracket dimensions as the Lippert steps. What I recommend instead is keeping your current steps and instead adding a very good handrail, the Lippert Entry Assist Handrail...
    view full answer...

  • Is There a Replacement Gearbox and Motor for 1989 Electric Step
  • So while we do have some options for you, there are no longer specific motors and gearboxes for electric steps manufactured before 1999, so for your 1989 Pace Arrow, what you will likely need is a motor upgrade kit, which includes the motor, linkage, control unit, switch kit, and hardware for installation. Keep in mind that this would only be for specific Kwikee steps, with the right one depending on the series of Kwikee step you have. - Kwikee Series 22, 23, 28A, 30, 32, 33, 34,...
    view full answer...

  • How to Determine the Correct RV Steps for My Doorway
  • If you are measuring at the lip that the screen door rests on, you are likely shorting yourself a little bit. You want to measure from the inside of the door flange to inside of the door flange. I have included a couple pictures that show the measurements you want to take. If you take those and have at least 25", then you can use the SolidStep Manual Fold-Down Steps # LC791574. If you take those measurements and do not have at least 25" then we do not have a set of Lippert SolidStep's...
    view full answer...

  • TorkLift GlowStep Stow N' Go Scissor Steps for 2022 Arctic Fox 990 With Platform
  • The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear, # TLA7834 is for an entry height of 31" - 42". Find the mounting spot for the bracket on your vehicle and measure from that point. The # TLA7835 part number is for height of 38-1/2" - 50". We also have available the TorkLift GlowGuide Handrail, # TLA7621, note linked product video. And the Pin Lock for TorkLift GlowStep Scissor Steps, # TLA7509. This replaces one of the pins that holds the scissor steps to the mounting...
    view full answer...

  • TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear for a 2021 Lance 825
  • The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7834 will fit entries with a height of 31" - 42". To decide which size you'll need, locate the space available for the mounting bracket on your application and measure the width. You will need an area of at least 23" wide and 3-1/2" tall. If your 2021 Lance 825 has those measurements then the # TLA7834 will work. Unfortunately there isn't any sort of database that tells us the entry height and mounting width of all the...
    view full answer...

  • Will Torklift RV GlowSteps TLA7834 Fit 2017 Forest River Flagstaff Classic 832BHDS
  • To determine if you are able to replace your 3-step unit with a 4-step unit like # TLA7834, you will need to take a few measurements as RV steps are not custom to the year, make and model of a specific RV. Measure from the ground to the top of the threshold on your RV to determine how much ground clearance you have. The Torklift Steps require ground clearance between 31 and 42 inches. The mounting bracket base dimensions for the Torklift GlowSteps are 21-1/2" wide x 14-1/2" tall x...
    view full answer...

  • Will the Brophy Camper Scissor Steps # AS23 Fit My Vehicle?
  • I have a solution for you. Unfortunately, the Brophy Camper Scissor Steps - 3 Steps # AS23 will not work with the dimensions that you provided (thank you!) because you have an entry height of 36 inches from the ground to the entry way. The Brophy steps are only designed to fit steps that have entryway heights of 24-30 inches. With the information that you provided, the best solution would be the Brophy Camper Scissor Steps - 4 Steps # AS04. With these steps, they fit entryway heights...
    view full answer...

  • Wiring Diagram For Kwikee 47 Series RV Steps
  • I tried looking up your invoice using the email you provided but was unable to find an invoice with any RV steps, that being said if you have the Kwikee 47 Series steps # LC427247 that you were looking at then I have attached the wiring diagram for you below. 16AWG Brown: Ground 16AWG Yellow: Ignition Switch 12AWG Red: Battery Positive 16 AWG White: Power Switch If you don't know series you have then you can look for a tag near the motor that will have a serial number...
    view full answer...

  • Fitment of 5-step Brophy Camper Scissor Steps for 39 Entry Height
  • For your 39" entry height, the 5-step Brophy Camper Scissor Steps, # AS25 will work just fine. I prefer this to the 4-step for your entry height; I think you will find these steps to be a great addition to your camper and they will not be setting at an awkward angle. If you want to a handrail, I recommend the Aluminum Hand Rail for 5 Step Scissor Stair, # AHR5.
    view full answer...

  • Recommended Fold-Down Steps For A 2013 Cruiser RV Fun Finder X Travel Trailer
  • Yes, we do have just what you need with the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps # MR98RR. You will need to slightly adjust the brackets (pictured below) by unscrewing the bolts and sliding them inward to meet your 22-3/4" flange to flange measurement and then retightening the bolts. As for the handrail, you'll want the Handrail for Second Generation 3-Step MORryde Steps # MR83AR. I've attached some videos below that will walk you through installation...
    view full answer...

  • MORryde StepAbove Steps For A 2007 Keystone Montana 2955RL
  • If I'm understanding you correctly, the MORryde StepAbove RV Steps # MR68RR is 8.3" deep when in the upright position. Based off of the measurements you took of your 2007 Keystone Montana 2955RL, the MORryde StepAbove RV Steps # MR68RR should work great for you.
    view full answer...

  • Can I Replace Current MORryde 3-step With a MORryde 4-step on 2018 Forest River Flagstaff 832OKBS
  • It is possible that you will be able to switch out your current MORryde 3-step RV steps to a MORryde 4-step, like the MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 4 Steps # MR28RR, but it will depend on a couple of measurements on your 2018 Forest River Flagstaff 832OKBS. Once you determine if you are able to go with the 4-step, it will not be hard to switch out the two steps. I have attached the installation instructions and the Qualification Guide for you to view. The...
    view full answer...

  • Is Item # TLA8003 Compatible With Bracket Dimensions Of 27-1/2 x 13-3/4 And Entry Height Of 29-1/2
  • Yes, TorkLift GlowStep Revolution Scissor Steps Item # TLA8003 is the correct steps for the measurements you provided to replace the steps on your 2016 Keystone Cougar Fifth Wheel. I do recommend, if you have pets, to add the SafeStep Vinyl Barrier Item # TLA7602. K9s have a hard time not looking through the steps as they walk up into the camper and get scared they are going to fall through. Adding the barrier provides a wall so they can see there is a back to it.
    view full answer...

  • Which Torklift GlowStep Set Would Work Best on Doorway Height of RV that is 40 inches
  • Thanks for the pictures of your steps on your RV. Right now it looks like you have the Lippert Manual Pull Out Steps part # LC432690. So for a similar Torklift GlowStep setup that would match the threshold height you have now of 40 inches you'd be best off with the 5-step part # TLA9105 which has a entry height range of between 34-7/8" to 42-3/8".
    view full answer...

  • Determining The Correct MORryde StepAbove RV Steps For A Travel Trailer
  • I spoke with MORryde and they stated the item number you were given does not match anything they have. Possibly it's the item number that the RV shop uses instead of the manufacturer number? Based on your photos it appears to me that you have a 29.5" door width and 33.5" entry height you'll need the MORryde StepAbove RV Steps # MR68RR. These steps are compatible with a door width of 27-3/4" to 30-1/4" and an entry height of 30" to 33-1/2", so you'll fall within these requirements. Looking...
    view full answer...

  • Comparing The Brophy # AS24 And Torklift # TLA7844 For Truck Bed Camper With Limited Mounting Space
  • Not following the manufacturer's instructions to the letter will give them an excuse if something were to happen so while I can't recommend drilling the extra holes to ensure it's safely mounted, it's the only way that the steps will work with your application. I called Brophy and the warranty for their steps is a 1-year warranty. As for connecting the landing gears of the TorkLift GlowStep # TLA7844 to the Brophy Camper Scissor Steps # AS24, this is something that we would not...
    view full answer...

  • Camper Steps For 24" Doorway Width & 22" Entry Height
  • First, congratulations! And while we do have steps that will work with a 24" doorway width and 22" entry height, the lowest entry height for the StepAbove steps is 25", so you'll need to go with the Lippert SolidStep. The correct step for a 24" width and 22" height is the following: - SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames # LC713662 The SolidStep # LC713662 has adjustable legs which allows it to work with lower entry heights, and also has a large, 13" top step...
    view full answer...

  • Will The MORryde StepAbove RV Steps # MR48RR Be Compatible With A 1/4" Threshold To Door Gap
  • The MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps # MR48RR will work with your 26" door opening width and 36" entry height but the hinge of these steps does require a threshold height of 5/8" - 3/4". To allow room for the hinge plate, there must be a gap of at least 3/8" between the threshold and the bottom of the entry and screen doors. If the gap is too narrow, the doors may not close while the steps are down. Because of this I recommend going with the...
    view full answer...

  • Step Recommendation For 30" Door Width And 36" Entry Height
  • The MORryde StepAbove Fold-Down Steps for 27-3/4" to 30-1/4" RV Door Frames - 9" Drop Item # MR78RR will fit your 30" door width with 36" entry height. There isn't a strut assist for this size but you won't have any issues without it.
    view full answer...

  • Which MORryde StepAbove RV steps for 2016 Coachmen Apex Travel Trailer
  • To determine the best choice of MORryde StepAbove RV steps for your 2016 Coachmen Apex Travel Trailer you need to have the threshold height measurement and the doorway width. With your travel trailer arranged on a flat surface, deployed as you will normally when camping, measure from the doorway threshold on your camper to the ground. Then measure from the inside of your door flange to the inside of the door flange on the opposite side. Compare these measurements to the attached chart. For...
    view full answer...

  • 5th Wheel Step Replacement With 3 Steps
  • The correct fit for a manual fold down step with a 24" entry width and 34" entry height is the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps # MR48RR.
    view full answer...

  • Clearance Needed To Fold Down MORryde StepAbove RV Steps In A Storage Lot
  • The MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways # MR98RR is going to be 36" in length from the hinge to the furthest part out. If you don't have enough clearance in your RV bay then you can detach these steps so you won't get locked out if you park in a tight storage lot where you can't fold the steps down. You'll just need to remove the pins from hinge plate to disconnect the steps so you can access your door.
    view full answer...

  • Kwikee Electric RV Step Complete Assembly 32 Series Compatibility With Kwikee Revolution Steps
  • Based on your description of a gear rod with teeth you have an Kwikee Revolution step. The part you listed is just a motor so I don't know the exact model of Revolution you had but since you're willing to drill new bolt holes you'll be able to install the Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide # LC372261. This step assembly includes everything you need to automatically open and close the steps with your RV door. I recommend replacing your current electrical...
    view full answer...

  • Recommended Replacement Steps For A Kwikee Part Number 903209000 Step Assembly
  • The Kwikee part number 903209000 comes up as a 32 Series step so the Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide # LC372261 would be the correct replacement and it comes with the whole setup to completely replace your old steps. You can reuse the old wiring if you want and plug these new steps in and save the wiring that comes with it for any future repair needed. The mounting bolts and washers do not come with the steps as you can just reuse your OEM bolts....
    view full answer...

  • RV/Trailer Over Frame Step Replacement Recommendation
  • To solve your step issue I recommend the MORryde StepAbove Fold-Down Steps for 23-3/4" to 26-1/4" RV Door Frames - 8" Drop Item # MR98RR. This will bolt right onto the bottom portion of the door frame instead of the sides and has adjustable drop down legs. These steps adjust down to 23-3/4" so you'd have an inch to work with when placing these to make sure you have enough clearance with the cabinet door. I've attached a review video and a size chart for you as well.
    view full answer...

  • Could Torklift Glowstep # TLA7804-8000 Work on Entry Height of 37 inches
  • Since the Torklift Glowstep # TLA7804-8000 has an entry height range of 31 to 42 inches your height of 37 inches would work well.
    view full answer...

  • Do MORryde Steps StepAbove Fold-Down Steps MR58RR Require Screen Door to be Removed
  • It is possible you will have to remove your screen door in order to use the MORryde StepAbove Fold-Down Steps for 21-3/4" to 22-1/4" RV Door Frames # MR58RR. The answer just depends on the gap you have between the bottom of your screen door and your threshold. As you can see by the cut out I added from MORryde, you will need a gap of at least 3/8" between the bottom of your door and threshold in order for the steps to work for you. I have added a link below to the installation instructions...
    view full answer...

  • Will the Lippert Steps # LC726895 Fit an Entry Level with a Height of 26 Inches?
  • I have a solution for you. Unfortunately, the Victory Step Manual Fold-Down Steps for RV and Toy Hauler Patios # LC726895 only fits on entry level heights of 30-45 inches tall. Unfortunately, we do not currently carry any bolt-on steps that fit stairs under 27-1/2 inches tall. With that being said, there are some stairs that do not bolt to your truck that will still get the job done. For this route, I recommend the Econo Porch Trailer Step w/ 2 Handrails and Landing # EHS-103-R. Since...
    view full answer...

  • How to Determine Correct Lippert SolidStep Replacement for Trailer
  • I can help you find the correct Lippert SolidStep for your RV, and it will just take a few measurements. What you need to do is measure your doorway width and your entry height to ensure you get the right replacement SolidStep. For example, the SolidStep Manual Fold-Down Steps # LC791572 are for a doorway width between 26" and 29-7/8" and for an entry height of between 27" and 36". Or the SolidStep Manual Fold-Down Steps # LC791573 are for doorways between 30" and 36" wide...
    view full answer...

  • Replacement for Coach Step 725-0022
  • The manufacturer no longer makes Coach Steps so you were correct in picking the Kwikee Electric RV Step product # LC3658373 because Kwikee is the correct replacement brand. The manufacturer stated that this product should directly bolt on just like your old Coach Steps. I've attached a video that goes over installation as well.
    view full answer...

  • Will Lippert SolidStep on RV Cause Interference with Door Opening/Closing
  • When the SolidStep part # LC791573 is installed on your RV there would be slight reduction in clearance above the threshold like you can see in the picture I attached. If it's already tight there it would become tighter. You may have to adjust your door but in general this does not cause interference.
    view full answer...

  • Compatible MORryde StepAbove Steps With Strut Assist
  • The MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps Item # MR98RR is the correct fit for your 24-1/4" door frame width and 31" entry entry height. The steps that come with the strut assist require a minimum of 31/5" entry height. You could get the MORryde StepAbove RV Steps with Strut Assist - 23-3/4" to 24-1/4" Wide Doorways - 3 Steps Item # MR45RR and just not extend the legs all the way but you'll want to be careful not to trip because the first step will...
    view full answer...

  • Is There SolidStep Manual Fold-Down Steps For a 24 Inch Wide Doorway
  • The dimensions that you provide for your doorway width and threshold height do not really coincide. Therefore, I recommend that you confirm this one more time as we do not have a set of the SolidStep Manual Fold-Down Steps that will fit the measurements that you listed. The doorway width will need to be taken from the widest point of the doorway, beyond the flanges which you can see in the attached photo and the threshold height will need to be taken while the trailer is on level ground....
    view full answer...

  • What Are the Dimensions of the Mounting Bracket for TorkLift Stow and Go Glow Steps
  • The bracket on the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket # TLA7834 has holes spaced 9-3/4" apart horizontally and 2-1/2" vertically. The bolt holes are 3/8" in diameter.
    view full answer...

  • Determining if MORryde StepAbove MR78RR Could Fit 2008 Jayco 35LRSA
  • To determine if the MORryde StepAbove part # MR78RR is the correct fit for your 2008 Jayco Designer 35RLSA you'd need to take two measurements. Measure the height of the doorway from the ground and also measure the width of your doorway. If the height is between 34 and 36 inches and the doorway width is between 27-3/4 and 30-1/4 inches the # MR78RR is the correct fit.
    view full answer...

  • Correct Replacement for Kwikee Series 23 Steps Model 902308000
  • I reached out to the manufacturer who told me the Kwikee Series 25 Steps # LC365837 you are looking to replace your older steps with will not work. This is what they told me: "Per my parts department, based on the information you have provided, they can verify that the customer is replacing a Series 23 Kwikee step assembly with a series 25 Kwikee step assembly. He needs to be advised not to do this, as they will not fit or bolt up properly. The frame sizes are different from one another...
    view full answer...

  • Mounting Space and Height Requirements for TorkLift GlowStep Revolution Scissor Step TLA8103
  • Your toy hauler's ground to threshold and opening width dimensions of 25-1/2-inches are just within the mounting requirements for the 3-step TorkLift GlowStep Revolution Scissor Steps # TLA8103. This unit is designed to give an easy drop-in fit as a replacement on an RV that has this 25-1/2-inches of space between factory mounting brackets. Do note these steps have a taller top-to-bottom retracted height of 14-3/4-inches including the feet, according to my TorkLift contact. If this does...
    view full answer...

  • Kwikee Steps Not Operating After Replacing Trailer Battery
  • It sounds like the Kwikee Step part # LC372779 is not getting 12V power from auxiliary battery. The first thing to check is the battery disconnect switch box that is between the positive side of the battery and the 30 amp fuse. If that box is switched to "off" the step will not operate. If the switch is on, I recommend to check the ground wires to the battery to make sure they have a secure connection. The battery should have a secure ground to the chassis. I have attached a diagram...
    view full answer...

  • Replacements for Kwikee Steps on 1988 Motorhome
  • I was unable to find any reference to any of those models or part numbers, unfortunately. For a step of that age, there are very few - if any - replacement parts, and since your wiring is different, that leads me to believe that none of the replacement controllers will work for you. The only option we can offer is an all-new assembly with a motor, control, and switch, such as the Kwikee 40 Series Electric RV 2-Step - Motor, Control, Switch # LC3726892. The right one will depend on the...
    view full answer...

  • Compatibility of TorkLift Glow Steps with Fox Landing Entry Platform for Truck Bed Camper
  • Given that the mount of the Torklift # TLA7844 is 2-1/2 inches wider than the available spot on the landing, these particular steps wouldn't be the best choice. CR Brophy makes a narrower 4 step unit, part # AS04 that would be a better choice. This set measures 17 inches wide and would fit your fox landing much better. According to Torklift, you could use the # TLA7844 on the rear edge of the fox landing, but the bracket would protrude past either edge by 1-1/4 inches and you'd need...
    view full answer...

  • Correct SolidSteps for 25 Inch Wide x 34 Inch High Entry Door on RV
  • Thanks so much for the photos they were super helpful, and based on those we do have the exact Lippert SolidSteps you need. Since your doorway width is just over 25 inches and entry height is just over 34 inches the correct SolidStep is the following: - SolidStep Manual Fold-Down Steps # LC791572 These steps will fit doors with your width and entry height, though the stabilizer you are referring to will likely need to be removed as it juts out too far. I have added links to the instructions...
    view full answer...

  • How To Determine The Correct RV Steps For A 2008 Tiffin Phaeton QSH
  • Manufacturers do not list the steps they use on their RV's so you'll have to measure the entry height (ground to the mounting bracket for the steps) and mounting bracket width to know what steps are the correct fit for your 2008 Tiffin Phaeton QSH. The Kwikee Electric RV Step Complete Assembly # LC3722862 are designed to fit an entry height of 14-1/4" and mounting bracket width of 32-3/8". This electric step assembly includes everything you need to automatically open and close the steps...
    view full answer...

  • Correct SolidStep Fold Down Steps for a 27-1/4" Doorway
  • Yes, the SolidStep Manual Fold-Down Steps # LC791574 would be the correct steps for your 27-1/4" wide doorway. The SolidStep Manual Fold-Down Steps # LC791574 fit doorways measuring between 25" - 28-7/8". The other thing you would want to check is that your entry height is between 35" - 44" tall.
    view full answer...

  • Door Clearance of Morryde Steps for 2014 Open Range 399BHS
  • As long as the doorway opens at least 90 degrees the MORryde StepAbove RV Steps, # MR98RR will clear to raise and lower into position. The # MR98RR is for doorway widths of 23-3/4" to 21-1/4" and entry heights of 30" to 33".
    view full answer...

  • Pull Out Step For 2016 Open Range Trailer With 40 Inch Entry Height
  • I do have an option for you but I contacted SolidStep and there is not a SolidStep model that fits a 24-1/2" door frame width with a 40 inch threshold height. Normally a threshold height over 36" would be a 26" door frame width. I recommend to use the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step part # TLA9105 which fits 24" doorway width and entry heights 34-7/8" to 42-3/8". The TorkLift steps will stow in the trailer so they are protected from the elements. I have attached...
    view full answer...

  • How to Determine Fit of 4-Step GlowStep Stow N Go Camper Steps on Fox Landing Steps
  • You may be able to use the TorkLift GlowStep Stow N' Go steps, though it is going to depend on the width of the area you are looking to mount them. You'll want to take a measurement of the mounting area width to determine if the mounting bracket will fit. According to TorkLift, the GlowStep Stow N' Go does require a 23" wide and 3-1/2" tall area for the mounting bracket, with the bracket itself measuring 21-1/2" wide. If you do have that space you can use the 4-Step GlowSteps: -...
    view full answer...

  • How to Determine Correct Torklift Scissor Steps for 2017 Keystone Outback 210URS
  • I checked with TorkLift and though there are not steps that are designed specifically as a custom fit for your 2017 Keystone Outback 210URS, but all you need to do is determine what your entry height is and go from there. For example, the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8103 (which have a 25-1/2" base) or # TLA8003 (which have a 27-1/2" base) require you have an entry height between 25-1/2" and 36". If you let me know your measurement I can help you...
    view full answer...

  • Can SolidStep Manual Fold-Down Steps Fit Over Door Threshold
  • I attached a picture that shows how the SolidStep Manual Fold-Down Steps # LC791572 would fit over a taller threshold like you mentioned. I also attached a review video for this for you to check out too.
    view full answer...

  • Replacement Parts For A Kwikee Step 40 Series
  • If your Kwikee Series 40 Steps # LC3726891 are stuck in the closed position you could either have a bad motor or control board. You can replace the motor with the Replacement Motor with Mounting Plate for Kwikee Electric RV Steps # LC379608 and the control board with the Replacement Control Unit for Kwikee 40 Series Electric RV Steps # LC363985.
    view full answer...

  • Can SolidStep Manual Fold-Down Steps # LC791574 be Installed without Removing Factory Steps
  • Most likely, yes, the SolidStep Manual Fold-Down Steps # LC791574 would fit without removing the frame mounted steps under the entry door. Customers have done this before, see picture. I have included a link to a video review of these steps for you.
    view full answer...

  • Hand Rail For Lippert SolidStep Manual RV Steps
  • Yes, the Lippert Entry Assist Handrail for SolidStep Manual RV Steps part # LC799640 is the hand that you need for your SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames part # LC791574. This hand rail fits third generation Triple or Quad SolidStep models. The Entry Assist Handrail can be easily removed or left in place when storing if clearance allows inside the trailer.
    view full answer...

  • How to Tell if the Pull-Out Step for RVs # LC432698 Will Fit a 2014 Cedar Creek 38CK 5th Wheel
  • Most aftermarket RV steps will replace the OEM steps without modification. The same is the case for the Alumi-Tread Manual Pull-Out Step for RVs # LC432698 that you referenced. These steps do have a weight capacity of 300 lbs so they are pretty sturdy. I am attaching some photos that give the different dimensions of this step. You can use these to compare them with your current steps and brackets for fitment. If they happen to not have the same mounting dimensions you can always have...
    view full answer...

  • Correct Replacement for Kwikee Steps 903206000
  • I really appreciate all the information as well as the photos. After doing some research, I found that the exact replacement for your Kwikee steps with model number 903206000 are indeed the Kwikee 32 Series Electric RV Double Steps # LC372261. I also was able to confirm this with my contact at Lippert. So, why then are your steps measuring taller than the specs listed for the # LC372261? Well, after 17 years of use, it's only understandable that the weight being repeatedly applied...
    view full answer...

  • Compatibility of Lippert # LC698799 SolidStep Manual Fold-Down Steps with 24 Inch Wide Door Frame
  • The Lippert # LC698799 SolidStep Manual Fold-Down Steps are indeed designed for 24 inch wide RV door frames. This set of steps would be compatible with the width of your door.
    view full answer...

  • TLA8103 Fitment on my 2018 Forest River Salem Cruise Lite 263BHXL
  • Yes the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear part # TLA8103 will work out well for you. Your entry height is right at the minimum meaning you will have shorter steps which is what you are looking for. You are likely closer to the 28-30" range because they go from the bottom of the door rather than the top of the step bracket itself. . They are also quite easy to operate when compared to a standard steel step. I have linked a video for you on them to check out if...
    view full answer...

  • Hand Rail For MoRryde StepAbove Strut Assisted Fold Down Steps
  • Awesome question. Yes they do. You can get the Handrail for Second Generation 4-Step MORryde Steps # MR73AR. This will mount to your MORryde StepAbove Strut Assist Fold-Down Step for 27-3/4" - 28-1/4" RV Door Frame - Quad # MR85RR and give you the stability you need going up and down the steps.
    view full answer...

  • Need Truck Camper Steps That Fit
  • The MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" wide doorways, # MR38RR, that you refer to, is for a max entry height between 34" and 36"; this is not best option for your 38" height threshold. These are to be mounted to the threshold, if you think there is not enough space for fitment that is another reason to look at other options. Occasional adjustments to threshold will need to be made for proper fitment. The MORryde StepAbove fold-down steps are typically installed on travel...
    view full answer...

  • Which Lippert SolidSteps fit Doorway that is 25-1/2 inches in Width
  • We've checked with Lippert in the past and they've told us that if the doorway is 25-1/2 inches wide you'd want to go with the size # LC791572 that is for 26 to 29-7/8 inches in width.
    view full answer...

  • Can Brophy Camper Scissor Steps # AS24 Fit 2021 Palomino HS2902
  • Yes, the Brophy steps part # AS24 that you referenced will work great on your 2021 Palomino HS2902 based on the entry height you mentioned having. This has an entry height range of 31 to 39 inches which your dimensions mentioned fall perfectly into the middle of.
    view full answer...

  • MORryde Steps For 35 Inch Entry Height & 28-1/4 Inch Doorway Width
  • Thanks so much for that information; I believe you were referring to MORryde steps, and we do have the exact steps you need for a 28-1/4 inch flange to flange doorway width and 35-1/4 inch entry height, which are the following triple steps: - MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 3 Steps # MR78RR The # MR78RR are designed to fit 27-3/4" to 30-1/4" flange to flange widths and 34" to 36" entry heights so they will work perfectly for your needs.
    view full answer...

  • Recommended Steps For 24-1/4 Door Frame And 31 Entry Height
  • I spoke with the manufacturer, MORryde, and their tech stated that you'll need 4" of clearance for the strut assist. Due to the cabinet you'll have to go with steps that do not have the strut assist like the MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 3 Steps Item # MR98RR. The strut assists are nice but these steps really are not hard to lift or lower down due to the lightweight construction so you'll be fine without them.
    view full answer...

  • TorkLift GlowStep Revolution Steps for a 2019/2020 Grand Design Reflection 337 5th Wheel Camper
  • Yes, the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 is what you'll want for a 2019/2020 Grand Design Reflection 337 5th wheel camper. I confirmed this with TorkLift and also attached a review video for you to check out.
    view full answer...

  • Replacement RV Pull Out Steps for Steps with Part Number 903206001
  • The part number you listed is associated with the 2-step version of the Lippert Kwikee which is exactly what the part # LC372261 is that you referenced so yes, this will work for you.
    view full answer...

  • Replacement Steps, Upgrade to Kwikee Electric RV Step
  • What I think you are asking is if the Kwikee Electric RV Step - Double - 32 Series - 24" Wide, # LC372261, will have clearance between bottom of step and ground since you currently have only a single step on your motorhome. This 24" wide 32 series step is designed to have an extended height of 14-1/8", please compare that to the extended height of current installed.
    view full answer...

  • How to Find Replacement for Motorhome Steps
  • I was unable to find any reference to motorhome step with the part number 725-0041 or a direct replacement, but I can tell you what you'll need to know in order to find a replacement. To find the correct replacement steps for your motorhome you are going to need to measure to ensure you have enough room for the mounting plate to fit. For example, the Kwikee 23 Series Electric Steps - Triple # LC3694042 has a mounting bracket dimension of 26-5/16" wide x 10-1/2" deep and bolt pattern...
    view full answer...

  • Selecting The Correct Handrail For MORryde 4-Step RV Steps, Gen 1 VS Gen 2
  • The MORryde StepAbove RV Steps # MR28RR are a second generation step. This will require the Handrail for Second Generation 4-Step MORryde Steps # MR73AR. To determine which generation step you have you can measure the threaded holes for the steps. On the Handrail for First Generation 4-Step MORryde Steps # MR33RR both sets of holes are spaced 5" on center. The second generation steps the lower set of holes are only 4-1/2" apart while the top set of holes are 6" apart.
    view full answer...

  • Correct Lippert SolidStep for 24 Inch Wide Doorway
  • You have measured correctly, and it looks like if you stretched out that tape measure so it was in a perfectly straight line your doorway would be 24 inches, but even if it was a hair over that it would not affect the fit at all. Based on your 24 inch frame-to-frame measurement, you can use the SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames, so long as you have the following entry height: - 22"-28" Entry Height: SolidStep Manual Fold-Down Steps for 24" Wide RV Door...
    view full answer...

  • Should I Choose The 3 or 4 Step SolidStep For my Jayco Eagle with 29-1/4" Door Way
  • The SolidStep Manual Fold-Down Steps are a great choice for your Jayco 5th Wheel Camper. The amount of steps needed depends on your entry way height from the ground. The SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames part # LC791572 is designed for entry way heights of 27" - 36". While the 4 step SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames part # LC791574 is designed for entry way heights 35" - 44". If you measure from the ground to the bottom...
    view full answer...

  • Mounting Hole Spacing of Lippert Manual Step
  • If you take a look at the photo I added with some measurements of the Lippert Manual Pull-Out Step for RVs # LC432682 you can see the mounting holes are spaced 7" apart front-to-back and 24-1/4" apart side-to-side. You can use these measurements to determine if these steps will work for you. I've also added a link to a video review of the steps for you to check out.
    view full answer...

  • Can You Change The Rise Of Scissor Steps On Camper
  • I have a solution for you. To answer your question, It is not safe for you or the product to use scissor steps if they are not fully extended. They are designed to be used when fully extended if not they may become unstable or damaged. You can use the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket # TLA7834 with the TorkLift GlowGuide Handrail for Campers and RVs with GlowStep Scissor Steps # TLA7621. These steps have a rise and drop...
    view full answer...

  • SolidStep Manual Fold-Down Steps Entry Height Requirements
  • The manufacturer for the SolidStep Manual Fold-Down Steps for 29" to 36" Wide RV Door Frames - Double - Aluminum Item # LC733932 says the lowest setting for the legs is 3-4" so you should be able to be at that 20" entry height and you'll just have the entry step be at a lower drop than normal. You'll just want to be careful that you don't trip with it being at an odd height for a first step.
    view full answer...

  • How to Determine if Lippert Pull-Out Steps 432682 Will Work as Replacement
  • We can help you figure out if the Lippert Manual Pull-Out Step for RVs # LC432682 will work as a replacement for you, though we have no way of researching if they will fit your '17 Jayco because we do not have access to a complete list of parts for each trailer made. What I can tell you is that to find out if these steps are going to fit you will just need to measure to ensure you have enough room for the mounting bracket to fit. The Lippert steps you referenced have mounting brackets...
    view full answer...

  • TorkLift GlowStep Revolution Scissor Steps for a 2019 Open Range Ultra Lite 2802BH
  • The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 3 Steps - 27-1/2" Base # TLA8003 is the correct choice for your 2019 Open Range Ultra Lite 2802BH. The 1/8" difference that you are seeing in the base width isn't enough that this kit won't fit and this is designed for an entry height range of 25-1/2" - 36" so it is perfect for your 31" entry height that you measured. Attached is a review video for you to check out.
    view full answer...

  • Do Torklift Glowsteps Require Tools to Remove/Install from Mounting Bracket
  • The install and removal of the step portion of the GlowSteps part # TLA7802 is pretty easy and does not require the use of any tools. Basically you just pull out cotter pin and then slide the pin out and you can remove the steps from the bracket. No tools required at all. In the attached picture you can see how someone replaced the pin with a lock.
    view full answer...

  • Entry Height Requirements For A Lippert SolidStep Manual Fold-Down Step
  • I spoke with Lippert, the manufacturer, and their tech stated that the SolidStep Manual Fold-Down Steps for 29" to 36" Wide RV Door Frames - Double - Aluminum Item # LC733932 legs will slide up and easily allow for your 18" entry height.
    view full answer...

  • Brophy Aluminum Non-Slip Step Compatibility with Lance 650 Truck Bed Camper
  • The Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs # AS24 will work well for your Lance 650 Camper as long as the height to your threshold is between 31 and 39 inches. If it is between 24 and 30 inches tall, then the 3 step # AS23 would be a better fit. I've attached a couple videos to assist.
    view full answer...

  • Can I Use the Lippert SolidStep on My Trailer- How to Measure
  • As long as the door frame of your 2017 Cougar 28SGS is between 25" and no larger than 29-7/8", then the Lippert SolidStep # LC791572 will fit; unfortunately we don't have a database that tells us the door sizes on coaches so you will need to measure between the door frame flanges. I've added a photo that should help give you an idea of how/where exactly to measure, as well as a review video.
    view full answer...

  • How to Choose the Correct SolidStep Manual Fold-Down for a 2016 Jayco Eagle 338RETS
  • In order to determine if the SolidStep Manual Fold-Down Steps part # LC791572 will fit your 2016 Jayco Eagle 338RETS you will need to measure the opening of your doorway at the bottom and inside the trim pieces. If this measurement is between 26"- 29-7/8" then these steps will work perfectly for you. I have also attached a photo which shows where you need to measure. The steps do not need to span the entire length of the doorway buy you will want them to be within a few inches of doing...
    view full answer...

  • Bolt Size For Electric Folding RV Steps
  • The size of the bolts are typically half inch but that can very. If your bolts are not damage they can be re-used. You want to make sure you measure the mounting plate dimensions on your current steps, where it mounts under your 2012 Winnebago Vista Motor Home. You will also want to measure the entry height and add 6-8" to make sure the bottom step on the Kwikee Electric RV Step Item # LC3658373 is far enough off the ground when fully extended.
    view full answer...

  • Will the SolidStep Manual Fold-Down Steps Work With a Screen Door
  • The SolidStep Manual Fold-Down Steps part # LC791575 are secured in the upright position by a striker which catches the lip on the door frame. I have attached a photo of this for you. In regards to compatibility with a screen door, this shouldn't be an issue for most screen doors as the steps actually sit inside the trailer. The only part that sits inside the door frame is the striker mechanism above which so long as it does not align with the screen door bar there would most likely be...
    view full answer...

  • Replacement Gear Box #151320 for Kwikee 32 Steps on 1999 Windsport RV
  • Thank you for the pictures- they're always helpful! I have a solution for you, but the Lippert gear box you were looking at is a replacement for the newer Kwikee 32 Series Steps. I spoke with my contact at Lippert and they said that the gearbox 151320 that you've got has been discontinued, and there are no available replacement parts for those models. Unfortunately, that means you'll need to replace the entire Kwikee steps unit. You can replace your Kwikee 32 series steps with # LC372261...
    view full answer...

  • How To Measure For A SolidStep On 2019 Heartland Pioneer RE275
  • I am happy to recommend a SolidStep option for the 2019 heartland pioneer re275. However, I would need a couple of measurements from you first to get you the correct step. First measure the door way width frame to frame like in the photo I have attached. Then you need to measure from the bottom of the doorway to the ground for entry height. If you provide those measurements I can assist you further.
    view full answer...

  • Replacement Step Needed for Double SCS/Frigette Coach Steps 733-0001
  • I reached out to my contact at Lippert who said that the 733-0001 number you gave me does look like a Coach Step number but he wasn't able to find anything in their system with it. Is there another number somewhere on the steps that has 6 digits and could you let me know how many steps you currently have? If not could you possibly send me some pictures of the steps so I can reach out to my contact and see if they can help me get the correct replacement for you.
    view full answer...

  • Can Brophy Camper Scissor Steps # AS04 be Installed on Ram 150 Tailgate
  • The Brophy Camper Scissor Steps # AS04 actually come with a bracket for you to mount on your pickup. It allows you to easily install the steps when you reach your destination and then remove them before heading out! If you would like to add a handrail for more stability we also have part # AHR4 for you to use.
    view full answer...

  • Outriggers for Use With Lippert Manual Pull-Out Double Step
  • I can tell you that based on the dimensions you gave, the 25-1/2" wide x 9-3/4" tall deep mounting bracket of the Lippert Manual Pull-Out Step for RVs - Double # LC432682 is not going to work with your outrigger. The reason being it is too wide for these steps. What you will have to do in order to install them is use the Lippert Outriggers for Manual and Electric RV Steps # LC301704. I have added a link to a video review for you to check out as well of the Lippert Double Step # LC432682.
    view full answer...

  • Are the Brophy Scissor Steps # AS05 the Best Option for a Height of 39-1/2 inches Bracket
  • If you are asking about the height adjustment range compared to your measurement of 39-1/2 inches then yes, the Brophy Camper Scissor Steps # AS05 would definitely be the better option. It is best to have stairs that can extend a little bit past what the height that you measured to account for uneven terrain. If you would like the best option then what I recommend is the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7845. The landing gear feet on this step choice really help to keep...
    view full answer...

  • Which LCI SolidStep Fits 2019 Winnebago Micro Mini 2306 BHS
  • You are correct, for your 2019 Winnebago Micro Mini 2306 BHS the correct Lippert SolidStep is the # LC713662 based on the dimensions you listed.
    view full answer...

  • Smallest Size Doorway Opening for SolidStep Manual Fold-Down Steps LC791572
  • The SolidStep Manual Fold-Down Steps part # LC791572 will fit a door way from 25" -28.9" wide when measuring the frame inside. If the factory label sticker shows a doorway width between 26"-29" then the above steps will work for you just be sure to verify the threshold is between 27"-36". I have attached a photo below to assist.
    view full answer...

  • Selecting The Correct SolidStep Manual Fold-Down Steps
  • Go with your measurement of having 24" at the widest unobstructed point, I suggest you go with the SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames, # LC713662. Not the # LC733931 SolidStep for 25" - 28-7/8" Wide RV Door Frames.
    view full answer...

  • Solid Step Fold-Down Steps for RV Compatibility with Screen Door Bar
  • The SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames - Quad - Aluminum # LC791574 will work fine with most screen door bars like the Camco Deluxe RV Screen Door Cross Bar - 21-1/4" long to 28-5/8" long - Aluminum - Black # CAM42183 that sounds similar to your description. You won't have issue with the bar if it is just above the plastic bubble cover slide as you stated.
    view full answer...

  • What Replacement Steps do I Need for my 2010 Jayco Eagle 351 RLSA
  • It does sounds like from your description that these are the correct replacements for you. The mounting brackets are 27-1/8" wide which matches what you have. There are a few different ways to attach the steps like you said. There are the three top mounting points that will match your front bolt but there are also four on the outside (two front and two rear) that will allow you to attach them to the bracket on your Jayco Eagle. There are also three toward the middle of the back but these...
    view full answer...

  • Will Inno Rooftop Cargo Box Fit on Yakima Round Bar Roof Rack
  • Just about any rooftop cargo box that fits on square roof rack bars will also fit on round bars. The one bar style that can sometimes be tougher to fit on is the heavy-duty type offered by Rhino-Rack, such as those in roof rack # RLZ01-DC. But all of the Inno cargo boxes we offer, all shown on the linked page, will fit both round and square roof rack bars. One of the most useful accessory items for use with a cargo box is the lightweight and cost-effective Camco Folding Aluminum Step...
    view full answer...

  • Recommended MORryde StepAbove RV Steps For A Thor Twilight 2100 Travel Trailer
  • The legs on the MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways # MR68RR will adjust up to make up for your .75" entry height measurement which will allow you to use them On your Thor Twilight 2100 travel trailer.
    view full answer...

  • Recommended Scissor Steps for Truck Camper
  • The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7844 is an excellent option for your camper. It will give you 4 steps up to your bumper and have a mounting bracket height of 35-3/8". This will enable you to mount it directly to the rear face of your bumper once your current TorkLift step is removed. These steps include landing gear which make them more solid and able to accommodate uneven terrain. The Glow tape makes the steps easy to see at night while the built-in...
    view full answer...