bing tracking image

Filter Questions and Answers:

reset filter
Transmission Coolers
Transmission Coolers
 

Expert Answers about Jeep Transmission Coolers


  • Can you Bypass/Replace the Factory Transmission Cooler on a 2006 Nissan Pathfinder
  • All of our transmission cooler manufacturers (Derale/Flex-a-lite) recommend installing their transmission coolers in conjunction with a factory transmission cooler. In other words, the recommended placement for a transmission cooler is after the factory transmission cooler and before the fluids running back to the transmission. On most cars today, the vehicle is equipped with one or two methods to cool the transmission fluid. The first method automobile manufactures use to cool the transmission...
    view full answer...

  • Will Derale Series 8000Transmission Cooler D13502 fit my 1997 Ford Explorer XLT
  • Transmission coolers are universal items and this one will fit your 1997 Ford Explorer XLT. The transmission from the factory is set up with a small cooler in the engine cooling system. It does fine for light use, but if you are towing an aftermarket Transmission Cooler is good idea for preventing wear and tear on your transmission, and even if you are not towing it will extend the life of your transmission. The cooler you were looking at, part # D13502, has significantly more cooling...
    view full answer...

  • Recommended Transmission Cooler for a 2015 Mazda CX9
  • The best standard mount transmission cooler for your 2015 Mazda CX9 is the largest one you have space available for in front of your radiator behind your grill. I recommend using the Derale 19-Row Stacked-Plate Transmission Cooler Kit part # D13403 as this is a fairly large standard mount transmission cooler that features a plate and fin technology which is far superior to the industry standard tube and fin design. As long as you have 13" wide x 7-5/16" tall x 2" deep of space in front...
    view full answer...

  • Can a Derale Transmission Cooler Fit Inline With Factory Cooler on 2000 Ford F-250
  • The Derale Series 7000 Transmission Cooler, part # D13105, that you have referenced is a tube-fin design cooler and is a top rated transmission cooler. This Derale transmission cooler will fit inline with your factory transmission cooler. You will want to route the transmission fluid through the factory cooler first, and then through the # D13105 cooler, and finally back to your transmission. So the Derale cooler will be added after the factory transmission cooler in the radiator. See...
    view full answer...

  • Where To Install A Transmission Cooler On A 2009 Saturn Vue
  • The transmission cooler should be installed in front of the air conditioner condenser for maximum efficiency. The inlet line on the transmission cooler should be connected to the oil return line coming out of the radiator. The line coming out of the transmission cooler will be connected to the inlet line going into the vehicles transmission. In my experience with other transmission cooler installations the amount of fluid lost is usually less than a pint. Also when installing the cooler...
    view full answer...

  • Installation of Largest Transmission Cooler on a 2011 Dodge Nitro
  • As far as transmission coolers go, you cannot cool transmission fluid too much, so installing the largest cooler that the space on your 2011 Dodge Nitro will allow is perfectly fine and will benefit your transmission the most. Ideally you want the transmission fluid to be between 160 and 200 degrees for the best operation and longest life from the transmission. Transmission coolers are a universal fit item, so as long as you have space in front of your air conditioning condenser, or between...
    view full answer...

  • Is a Supplemental Transmission Cooler Required for a 2016 Toyota Tacoma
  • The only way to prevent the possibility of the vehicle's transmission fluid mixing with the vehicle's radiator fluid would involve routing the transmission fluid away from the radiator to an aftermarket cooler. Usually the manufacturer will state whether or not a supplemental transmission cooler is required for towing. With that being said it is certainly never a bad idea to install a supplemental transmission cooler for towing purposes nor will it harm the vehicle. Although your 2016...
    view full answer...

  • Recommended Transmission Cooler for a 2008 Dodge Ram 1500
  • As long as the transmission cooler you are referring to is an auxiliary cooler and you still have the transmission lines running through the radiator then yes you can bypass this cooler for a temporary fix. I would not tow a trailer while the temporary fix is in place. For a replacement transmission cooler for your 2008 Dodge Ram 1500, I recommend using the Derale Series 8000 Plate-Fin Transmission Cooler Kit part # D13503 as this transmission cooler is much larger than the factory cooler...
    view full answer...

  • Will A Supplemental Transmission Cooler Void the Factory Warranty on a 2017 Toyota Sienna
  • While we do offer transmission coolers with a superior design in comparison to the factory transmission coolers neither of our aftermarket transmission cooler manufacturers Derale/Flex-a-lite were able to provide information as to what transmission cooler meets OEM specs. The supplemental coolers we offer are just that, supplemental meaning they are designed to be used in addition to the factory transmission cooler. However, I can honestly say I have never heard of people running into warranty...
    view full answer...

  • Is a Transmission Cooler Needed for Towing with a 2013 Nissan Altima 2.5 Liter And CVT Transmission
  • Installation of a Transmission cooler, like the Derale Series 8000 Plate-Fin Transmission Cooler # D13503, to cool the constant variable transmission fluid in the transmission on your 2013 Nissan Altima would be a good choice if you will be towing with your vehicle and your vehicle has transmission fluid lines that run to an OEM cooler at the front of the vehicle. These lines could go to a tank mounted cooler in the radiator or to an external cooler in front of the radiator. If your transmission...
    view full answer...

  • Recommended Transmission Cooler for a 1998 Chevy K2500
  • For a transmission cooler that will work well for your 1998 Chevy K2500, I recommend using the Derale Series 7000 Tube-Fin Transmission Cooler Kit w/ Hose Barb Inlets part # D13105 as this is one of the largest, most efficient transmission coolers we offer for your vehicle. I recommend installing this transmission cooler in conjunction with the factory transmission cooler (if equipped). I also recommend placing the transmission cooler in front of your radiator behind the grill of the vehicle...
    view full answer...

  • Transmission Cooler For My 2010 Subaru Outback With Flat 6 Transmission
  • We have a number of options for your 6-Cylinder, 2010 Subaru Outback Wagon, provided the transmission hose line diameter matches that of the transmission cooler. The Derale Dyno-Cool Tube-Fin Transmission Cooler Kit - Class III - Economy, part # D12903, has transmission hose lines that measure 3/4" in diameter. If the transmission lines on your Outback are the same dimensions, this cooler will work for your vehicle. You will have to measure the dimension of the hoses on your transmission....
    view full answer...

  • Supplementary Transmission Cooler to Aid Factory Transmission Cooler in 2016 Dodge Grand Caravan
  • A supplementary transmission cooler like Derale # D13503 or one of the others we offer for your 3.6L 2016 Dodge Grand Caravan, all shown on the linked page, are intended to provide additional transmission cooling to supplement the factory-installed cooler that is inside the radiator. These coolers install downstream of that factory cooler and further reduce the transmission fluid temperature. Since transmission fluid cannot really be over-cooled this means less stress on the transmission. You...
    view full answer...

  • Will the Derale Series 8000 Plate-Fin Transmission Cooler Kit Fit on a 2006 GMC Canyon
  • Adding an aftermarket transmission cooler is a good idea in any case. Transmission coolers are not vehicle specific so the Plate-Fin Transmission Cooler Kit, # D13502, will fit as long as there is room in front of the vehicle between the air conditioning condenser and the grill to mount it. We have a couple of transmission cooler installation videos that detail different ways to install a transmission cooler for you to review. I would select the largest cooler possible in your situation....
    view full answer...

  • Transmission Cooler for a 1988 Lazy Dave RV on a Chevy G30 Van Chassis
  • Transmission coolers are not vehicle specific so anyone that will fit in the space you have in the engine compartment you can use. Adding the cooler will not bypass the existing cooler which is located inside the radiator. Adding a cooler provides supplemental cooling to the factory cooler. The traditional way to install an additional cooler is in line with the factory line that leads back to the transmission. You will have one hose that goes from the transmission to the radiator and another...
    view full answer...

  • Recommended Transmission Cooler for a 2016 Subaru Crosstrek
  • I spoke with my contact at Derale and they informed me that there is no reason as to why an aftermarket transmission cooler would not be compatible with the CVT transmission in your 2016 Subaru Crosstrek. I recommend using the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets part # D13504 as this will be an excellent option to bring down the transmission fluid temperatures in your vehicle while towing. As long as you have 11" wide x 12" tall x 7/8" deep of space in front...
    view full answer...

  • Will the Derale Dual Pass Heat Sink Cooler # D13262 Fit a 2006 Chevrolet Tahoe
  • Transmission coolers are not vehicle specific, but there are coolers that are recommended specific to mounting locations of your vehicle. This Derale Dual Pass Heat Sink Cooler # D13262, is intended to be used as a frame mount cooler. As long as you have enough space on the frame of your 2006 Chevrolet Tahoe, this cooler will work for you. Frame mount heat sink coolers are not the most efficient style of transmission cooler, but the trade off is the minimal space needed for mounting this...
    view full answer...

  • How to Install an Aftermarket Transmission Cooler with a Factory Transmission Cooler
  • Yes, the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets part # D13502 can be used as an additional transmission cooler for your 2009 Ford Explorer. I recommend placing the cooler after the factory transmission cooler (radiator). Yes, you will want to use the male barb fitting in the Derale Radiator Adapter Fittings for Ford, Lincoln and Mercury part # D13025 for this. 1) Disconnect the return transmission cooler line from the radiator. 2) Install the male D13025...
    view full answer...

  • Installing the Derale Transmission Cooler, # D13504, On A 2005 Ford Expedition
  • The Derale Transmission Cooler, # D13504, will fit your 2005 Ford Expedition. It will connect in-line into the existing lines on your factory transmission cooler. If you have an aftermarket transmission cooler on your vehicle now, then you will have to remove it to install this transmission cooler. The transmission cooler will be mounted between your vehicles grill and the A/C condenser. It will be connected inline to the return line coming out of the factory transmission cooler in the...
    view full answer...

  • Transmission Cooler for a 2017 Mazda 3 with the 2.0L I4 Engine
  • There are three different style's of transmission coolers; remote mount, standard mount, and pan mount. The most common cooler we have is a standard mount cooler that will need to be positioned on the front of the vehicle where airflow is sufficient. A remote mounted transmission cooler can be located anywhere on the vehicle as the included fan will ensure the proper amount of airflow is received. The last type of transmission cooler we offer is a pan mounted cooler which replaces your...
    view full answer...