The Brophy Clamp On Camper Tie-Downs, # HSAB are 3/8" thick. So for a snug fit to your topper they will need to be removed or you will need to adjust for this dimension within the seal of where your topper comes into contact with the bed rails. view full answer...
In order to install a ladder rack on your 2014 Toyota Tundra you'll have to remove the truck topper since the mounting brackets sit in the same spot as the topper and the uprights are slanted so they will make contact with your topper.
If you're willing/able to remove the topper when you need the ladder rack then I recommend the Flint Hill Goods Aluminum Pickup Truck Ladder Rack # FHG64ZR because of the aluminum construction. I've put together a handful of these ladder racks and you'd... view full answer...
Since you already have Yakima tracks on your topper you can complete the roof rack using Landing Pad 1, part # Y00221, with Control Towers, part # Y8890027, and round crossbars. You need two sets of the landing pad and four control towers.
Then choose your length of crossbar:
48 inch - # Y00408
58 inch - # Y00409
66 inch - # Y00410
78 inch - # Y00411
86 inch - # Y00420 view full answer...
The Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555 will work with your Lakeland topper. This replaces the existing handle and ties into your power locks on your truck. Since you have two handles you would need two of these assuming you want both to lock. view full answer...
The Thule Hullavator part # TH898 will fit the Yakima Corebars you have on your truck topper and would work next to your older version of the Hullavator. view full answer...
Yes, the TrackTowers for Yakima Crossbars and Platforms # Y52AV will fit perfectly with the track system on your 2023 Ram 1500 LEER truck topper.
I also recommend picking up the 60" JetStream Crossbars # Y00426 and Lock Core Kit # Y07204 for a complete, lockable, roof rack system. view full answer...
Yes, the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT will fit directly to the tracks on your ARE truck topper.
I really like this system because it comes with everything you need and the legs have the quick-release feature if you every need to remove the roof rack from your truck. view full answer...
The Erickson Clamps for Truck Bed Toppers # EM09453 that you referenced is a general-purpose clamp kit intended for securing a hard tonneau cover or camper shell to the standard bed rails of a pickup. Without knowing the specific tonneau cover brand and model you are using I cannot assure you of their fit in your particular application. Certainly they may work fine, or work with some trimming as you note, but I cannot give you absolute assurance since these items are intended for a broad... view full answer...
The Lock Cylinder Protection Cap for Bauer Products # BA49VR will work with Bauer lock cylinders. Since that is what you have on the t-handles on your Leer truck topper, these should work just fine.
If you want to be absolutely sure, the inner diameter of the # BA49VR cap is 1". You can measure your lock face to make sure these will work. The other thing you may want to check is the clearance of your t-handles as the caps will add a little bit of extra girth to the lock face. view full answer...
The Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555 should be compatible with the A.R.E. V-Series topper on your 2017 Chevy Colorado. It is the right type of frameless glass door with a lock, though the only thing you need to ensure is that your T-handle goes into a 1-1/8" center hole as this is not information we have. It is very likely, though I highly recommend finding out to be sure. view full answer...
The Thule Evo Square bar is an excellent option with your ARE truck topper. Since the cross bar spread is 42" from post to post you are good to go with the Thule 47" # TH712200, the Thule 50" # TH712300, or the Thule 53" TH712400 that feature a 9-3/4" channel opening at the end of the bars to attach to your podium mounts.
Since you are using square bars you may want the Thule AirScreen Fairing # TH82WV to cut down on wind drag and noise.
I included a video review of the Thule Evo Square... view full answer...
In order to install the Yakima SUPDawg, # Y04075, on a truck camper shell, you will first need to add crossbars to the camper shell. You can use a system like the Rhino-Rack Roof Rack System, # Y02-480B, to attach crossbars to your camper shell. There will be drilling required to attach the tracks to the roof of the camper.
Once the roof rack is installed you can mount the SUPDawg. view full answer...
The Rhino-Rack Vortex Crossbar System part # RRVA165B-RRRLT600 is a great cost effective, all-in-on option that will allow you to add a set of crossbars to the Thule tracks installed on a Leer Truck Bed Topper. view full answer...
The Solera 13-1/2 Foot Slide-Topper, # LCV000168109, will fit the top of a slider box that measures between 152 to 157-34 inches wide including the flange.
The anwing will include black hardware and well as having black awning fabric. The awning will attach permanently to your slide out and extend and retract when the slide out is in operation.
Due to its size, this product will ship via truck freight. view full answer...
We have confirmed in past that the Pop and Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers # PAL9772 does fit the A.R.E. CX Classic Topper that you have so it would work well for you. view full answer...
I have a solution for you. In order to use the Rhino-Rack Sunseeker Awning - Roof Rack Mount # RR32133 to your truck topper, you need to have crossbars with compatible channels installed on the tracks first.
Since you say you have Thule tracks on your ARE camper, we do have great compatible systems:
- Rhino-Rack Roof Rack for Thule and Yakima Tracks - Black - 65" Long # Y01-140B-NT
- Rhino-Rack Roof Rack for Thule and Yakima Tracks - Black - 54" Long # Y01-120B-NT
You will be able to... view full answer...
There is a rack system that will work on your 2005 Silverado 1500 with a topper but the MaxxTow MaxxHaul Over-The-Cab Truck Bed Ladder Rack MT70232 mounts on a truck's bed rails and a truck topper will not allow this type of install.
Instead, the ladder rack system I recommend for the camper shell on your 2005 Silverado is the Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT because it gives your Silverado a quiet, yet strong and durable rack on top of your truck's... view full answer...
Thank you for the details!
The Rhino-Rack Roof Rack for Factory Tracks # Y02-480B-NT are exactly what you're looking for to fit the ARE topper tracks on your 2020 Chevy Colorado.
These fit directly to your tracks, are more cost-effective than other options, and come with towers and 54" crossbars that can be easily removed from the bases if you ever need to remove the system. None of this requires drilling since you have the tracks already installed on your topper!
You said you didn't... view full answer...
It sounds to me like your wanting to be able to plug in your light so that you can remove the bed topper as needed. The trailer connector is not designed to do what you're wanting it to do so the best way to connect your topper light to your vehicle's wiring is to do the following steps:
You'll first want to pop out your tail light to gain access to the wiring and find which wire has power when the brake pedal is depressed. You can use a tester # PTW2993 to check the wires for current.... view full answer...
I have a great solution for you. From the looks of the System One ladder racks, they look like they mount on the top surface of the bed toppers and extend the length of the sides of the truck. If this is the case, you will not be able to use the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # PE54UV because it comes with a lip that partially covers the toppers on the bed rails, creating an uneven surface for the bases of the ladder rack. Also, without knowing what particular model... view full answer...
Go To Results