If you use the long bolt kit part # INISF722 with the Inno Locker Watersport Carrier # INA446 it will fit the Rhino Rack Crossbars part # RR62XR that you mentioned. The bars are 1/16 of an inch too tall to fit without the adapter. view full answer...
You should not have a problem carrying the Esquif Cargo Canoe on the Lockrack Adjustable XL Watersport Carrier - Canoe, Kayak, or 2 SUPs - Side Loading - Universal Mount. part # LR54FR, provided that your vehicle's roof rack can safely support the weight of the roof rack, canoe carrier, and the canoe. The Lockrack Watersport Carrier can carry watercraft up to 175 lbs and the Eaquif Cargo Canoe weighs 95 lbs. This rack allows you to safely transport your boats without bow and stern tie... view full answer...
Yes, the Lockrack Adjustable Watersport Carrier # LR54FR is compatible with the Malone AirFlow2 Roof Rack # MPG215.
You will just need to use the Lockrack's included T-bolt hardware to mount the Lockrack to the Malone crossbars instead of the clamping system, because the Lockrack's clamps aren't quite large enough to fit around the Malone aero crossbars.
I have added links below to video reviews for you to check out as well of the Malone AirFlow2 Roof Rack # MPG215 and Lockrack Adjustable... view full answer...
Yes, the Lockrack Adjustable XL Watersport Carrier - Canoe, Kayak, or 2 SUPs - Side Loading - Universal Mount # LR54FR will work with your Wenonah Minnesota II Kevlar. I confirmed with Lockrack that the Adjustable XL Watersport Carrier will allow you to load your canoe hull-side up as long as the arms fit over the top of the canoe to hold it in place. I went ahead and attached a video of a kayak being transferred hull-side up for perspective. view full answer...
Glad you asked, and it does, but you'll need longer bolts for the clamp-on version of the Inno Locker, or you can use the channel-mounted version. The reason for that is the clamp-on Inno Locker mounts to crossbars up to 1-1/8" tall, and the Rhino-Rack Vortex crossbars are 1-3/16" tall. So here are your two options:
Clamp-On
- Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On # INA446
- Tall Crossbar Adapter Kit for Inno Locker Watersport Carriers # INISF722 (Note:... view full answer...
Yes you can use the Lockrack Adjustable Watersport Carrier # LR24VR with regular surfboards. This carrier is adjustable and can be adjusted from 19-11/16" wide to 25-9/16" wide, so if your board is wider then you'd be better suited with the Lockrack Adjustable XL Watersport Carrier - Canoe, Kayak, or 2 SUPs - Side Loading - Universal Mount # LR54FR. view full answer...
The Inno Locker Watersport Carrier # INXA445 will definitely fit the T-Slots integrated in the OEM roof rack for your 2022 Tesla Model 3. I'm not exactly sure who makes the OEM roof rack (although it does look similar to the Yakima bars) but over the years the T-Slot dimensions in roof racks have become standardized so we know this will work. view full answer...
Yes, the Inno Locker Watersport Carrier # INA446 will fit fine on your Thule AeroBlade roof rack and in fact this versatile locking carrier fits all shapes of roof rack bars. It also handles not only two SUPs, but also surfboards, canoes, and kayaks. The linked diagram illustrates the Inno carrier's rack fit capabilities. view full answer...
I do believe that you are correct in that your canoe may be too wide for the single rubber piece on the Lockrack Watersport Carrier # 339LR65LASET. Thankfully Lockrack has their Adjustable Watersport Carrier
Lockrack Adjustable XL Watersport Carrier - Canoe, Kayak, or 2 SUPs - Side Loading - Universal Mount
Item # LR54FR which comes with universal mounting options (both brackets and T-Bolts) so this carrier will definitely work with your Old Town Saranac 154 Square stern canoe.
I reached... view full answer...
Yes absolutely the Lockrack Adjustable XL Watersport Carrier # LR54FR has a pretty high weight capacity at 175-lbs, and according to Old Town your Discovery canoe weighs 91-lbs fully assembled so you should have more than enough capacity.
Attached is a video of this carrier installed on a 2017 RAV4 for you to check out so you can get an idea. view full answer...
For the Inno roof rack that fits your 2013 Ford Edge part numbers # INB137, # INSUT, and # INK759 the LockRack universal kayak carrier part # 339LRUNISETA is a confirmed fit and would work great. view full answer...
The SportRack Semi-Custom Roof Rack for Naked Roofs part # SR1010 which is a fit for a 2011 Honda Accord Sedan will work with the Lockrack Adjustable Watersport Carrier part # LR54FR. The universal clamps will have no problem tightening down on the square bars. In regards to crossbar spread, this won't be a problem and you don't need to use bow/stern tie-downs but it won't be a bad idea to provide more support. The Thule Quick Draw Tie-Down Ropes w/ Ratchets and Strap Loops # TH855XT will... view full answer...
The Lockrack Adjustable XL Watersport Carrier part # LR54FR will work great with a Hobie Mirage Outback Kayak. It has a 175 lb weight capacity with max width of 48".
In order to use the carrier with the Yakima HD Crossbars you'll need to utilize the t-bolts. view full answer...
The Yakima SupDawg part # Y04075 that you referenced can fit the crossbars of the Yakima OverHaul part # Y01151 but it would do so by clamping around the bar.
If you wanted carriers that install via the top channel of the bars I instead recommend the Inno Locker Watersport Carrier - Locking - Channel Mount - 1 Boat or 2 Boards # INXA445 or the Lockrack Watersport Carrier # LR54FR. view full answer...
Yes, the Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On - 1 Boat or 2 Boards # INA446 will allow you to attach your FeelFree Lure 13.5 fishing Kayak to your 60-inch Yakima Crossbars on your 2015 Jeep Cherokee. view full answer...
I have the perfect Lockrack option for the taller sit on top fishing kayaks like the Jackson Big Tuna, the Lockrack Adjustable XL Watersport Carrier part # LR54FR which was designed by Lockrack for this exact reason. This version unlike the standard has much taller uprights to better accommodate taller sit on top fishing kayaks. view full answer...
The Lockrack Watersport Carrier part # 339LRUNISETA will work just fine with the factory roof rack on your 2016 Ford Expedition so you don't need to replace this. That said, you will need to be mindful of your usable crossbar space in relation to the width of your kayak/boards but this should not be too much of an issue for most kayaks/boards. view full answer...
In order to attach the Thule Hull-A-Port Kayak Carrier part # TH834 to the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part # TH500XT you will need the Watersports Adapter for Aeroblade/Aeroblade Edge Bars part # THXADAPT11. The Xsporter's crossbars are too large for the Hull-A-Port to wrap around which is why you need to use the Watersports Adapter because this converts the Hull-A-Port to mount using the track system. view full answer...
Go To Results