Expert Answers about Truck Bed Protection
- Do the DeeZee Brite-Tread Bed Caps # DZ31967 Widen Toward the Middle?
- I went ahead and reached out to my tech at DeeZee, and they said that from their available diagrams, the DeeZee Brite-Tread Wrap Side Bed Caps # DZ31967 do widen slightly toward the center to about 1/4 of an inch wider. However, with that being said, they did confirm that the # DZ31967 fits perfectly with your 8-foot bed on your 2019 Ram 1500 Classic.
view full answer... - Does Putco Full-Coverage Tailgate Protector Cover Top of Tailgate on 2005 Ford F-150?
- The Putco Full-Coverage Tailgate Protector # P59123 will not cover the top edge of the tailgate on your 2005 Ford F-150. It is designed to fit over the interior of your truck's tailgate. If you are looking to cover the top edge of your tailgate you can use the Putco Tailgate Cap # P52619P, which according to Putco will work with the tailgate protector. I've linked the instructions for both parts so you can take a look.
view full answer... - How Does the Putco Tailgate Cap Part # P53614P Install
- The Putco Tailgate Cap part # P53614P installs using self tapping screws which are included for you. They install on the inside of the tailgate so they won't be as visible. I am sure you could also use some 3M double sided adhesive for a less permanent install if you like. This can be acquired at most local auto parts stores.
view full answer... - Reinstalling Putco Truck Bed Rail Skins
- Unfortunately we do not carry the 3M tape to reinstall the Putco Truck Bed Rail Protective Skins - Stainless Steel # P59527 but they simply utilize the RED 3M double sided tape. Simply clean the top of the bed rails, add the tape and then install the rail skins.
view full answer... - Can Putco Truck Bed Protective Skins be Removed and Installed Again
- As you mentioned in your question, the Putco Truck Bed Rail Protective Skins # P59527 easily installs using pre-applied 3M tape on the trim pieces. I checked with Putco and they state that once the skin is in place it cannot be moved or removed without causing damage to the part. With this in mind you will not be able to take the piece off and re-install it at a later time.
view full answer... - How Are the Putco Truck Bed Rail Protective Skins for a 2008 Ford F-150 Installed
- If you are referring to the Putco Truck Bed Rail Protective Skins part # P59585 which are a fit for your 2008 Ford F-150 with the 6-1/2' bed then these install via double sided tape which means no drilling or cutting is required.
view full answer...
Go To Results