bing tracking image

Filter Questions and Answers:

reset filter
Ladder Racks
Ladder Racks
 

Expert Answers about Toyota Ladder Racks


  • Troubleshooting Ladder Rack Fit for 2019 Ford Ranger with G2 Tonneau Cover
  • For your 2019 Ford Ranger with Backflip G2 # BAK226332 there is not a specific fit available that will be directly compatible with your 5 foot bed and folding tonneau cover. If it were me, I would get the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000964 knowing it is a fit for a F-150 5 foot 6 inch bed and the rails will need to be trimmed to fit but the vertical pieces will work well with your cover. The Yakima Overhaul you referenced will not be compatible.
    view full answer...

  • TracRac Ladder Rack On Toyota Tacoma Keeps Coming Loose And Move Side To Side
  • On your Toyota Tacoma, the TracRac similar to # TH27000XT-TA, I recommend using Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube, # LT37420 and a lock washer on the screws that secure the unit to your truck. If you think the hardware is bad, we have the Replacement Hardware for TracRac G2 and T-Rac G2 Fixed Mount Ladder Racks Retrofit Kit, # TA7521653001.
    view full answer...

  • Troubleshooting Knobs Seized Up On Thule TracRac SR Sliding Truck Bed Ladder Rack Rails
  • You can try using penetrating oil to loosen the corrosion built up on the Knob # TAKB-90030-1 for your Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-501. If they still will not budge you may have to break off the knob and drill out the threaded portion. We do have the Replacement Knob # TAKB-90030-1 or the Locking TracKnobs # TH25700 you will be able to use to replace your knobs. Be sure to use Loctite Anti-Seize Stick # LT37616 on the treads to help prevent them from seizing...
    view full answer...

  • Troubleshooting Non-Functioning Lock Cores On A Rola Haul-Your-Might T3 Truck Bed Ladder Rack
  • If the locks on the crossbars of your Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 aren't wanting to turn then they either are clogged up with something and you can try to spray them out with some WD40 or you might be using the wrong key. I would double check that you have the correct key and didn't accidentally swap it out with the keys from an other accessory that you have. If you still can't get the locks to properly operate you can most likely order replacement lock cores through...
    view full answer...

  • Troubleshooting A Thule Xsporter Ladder Rack Crossbar That Won't Attach To The Towers
  • The crossbar to tower connection for the Thule Xsporter Pro Adjustable Ladder Rack # TH500XTB is two bolts along with two custom-fit square nuts so if you're having issues the hardware is either too tight or you have some sort of obstruction in crossbar's track. I recommend cleaning out the track as best you can and then using a dry silicone spray like # RM-747 to lubricate the track. Try sliding the square nuts around to work the lube through the track. This should allow you to reconnect...
    view full answer...

  • What Options do You Have for More Support for a Canoe Mounted on an Adarac Rack on a 2013 Silverado?
  • I have a solution for you. Unfortunately, there is not an extension of the Adarac ladder rack # A70510 available. As far as having additional support of the bow of the canoe on your 2013 Silverado's cab, I recommend the Malone Foam Block for Canoes - 6" Long - Qty 1 # MPG160. The Foam Block will serve as a point to mount the bow down to the roof of your cab to make sure the kayak doesn't bump it during transport. In addition to the foam pad, you will need the Malone Hood Loops for Bow and...
    view full answer...

  • Troubleshooting Thule Lock Cylinders That Will Not Operate on the Thule Xsporter Ladder Rack
  • I contacted Thule and they explained that you my need to try an lube the lock cylinder to see if you can get the locks to engage. Using a lubricant like WD-40, spray the key and then insert into lock. Turn the key a few times back and forth between the locked and unlocked positions. If this does not work, you could use your change key to remove the lock cylinder. Insert change key and turn in the unlock position try to wiggle the lock cylinder out. This will at least allow you to perform...
    view full answer...

  • Where Do I Install a TracRac SR On My 2020 Ford F150 5-1/2 Foot Bed?
  • I have a couple troubleshooting steps to suggest. The first thing I noticed was that the part number for this question is the TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-501. This model of the SR is customized for the 2020 Ford F-150 6-1/2 foot bed. The part needed for the 2020 Ford F-150 5-1/2 foot bed is part # TH43002XT-508. If you have the # TH43002XT-501, it will not fit your truck. Another thing to consider is if the stake pocket tabs have been removed from the stakes on...
    view full answer...