The Universal Door Bumper # 37210705 is constructed of a durable plastic, not rubber.
If you are wanting/needing a rubber door bumper then we have the Universal Door Bumper # 37210695 which is constructed of rubber. view full answer...
The Westin custom-fit bumper # 31012 is built to factory specifications to match your 1998 Dodge Dakota (fits all models but it won't be the exact bumper it came with originally.
The bumper # 31012 is chrome with black steps.
The step pads are a molded polymer plastic which creates a non-slip surface. As a result, provides you solid grip when you get in or out of your vehicle.
Mounting hardware is included as it's a quick and easy bolt-on installation. view full answer...
The Westin Perfect Match Series Rear Step Bumper, # 31012, is only available in the chrome-plated version. steel. The top has black textured step pads. The bottom sections you see on either side of the center step are plastic. This is an OEM replacement so it is constructed just like the factory bumpers. view full answer...
Westin Fey Surestep Deluxe XLT Rear Bumper # 21007-92230 is made of chrome-plated steel so it will hold up about as well as any other chrome-plated steel component on a vehicle. Since it isn't stainless or aluminum if the bumper is exposed to a lot of salt, either during winter or if you live near the ocean, then rinsing off the bumper will help it to last longer; which is true for any chrome part on a vehicle. view full answer...
My Westin representative tells me that their Fey Diamondstep Bumper you referenced, part # 21000-92230 is constructed of 12 gauge chrome plated steel. The bumper includes mounting brackets and hardware that are compatible with the 1973-1991 Chevy C/K series trucks, 1967-1997 Ford trucks and 1972-1993 Dodge trucks. view full answer...
The screw included in the Rubber Bumper - 1" - Black # 37211745 is zinc. This bumper does come with a lifetime manufacturer warranty if any parts wear out over time. view full answer...
I checked with the manufacturer for you and the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 weighs 12 lbs.
This hitch fits 4" x 4" square bumpers and while there is technically not a built-in security measure to keep someone from taking the hitch, it does get torqued down tightly to your bumper as you can see in the linked instructions, so it would be quite a bit of work to take it.
Additionally, if you were using a bike rack such as the Yakima LongHaul 4 Bike RV Rack # TH9057 or... view full answer...
The finish on the Mount-n-Lock Heavy-Haul'r RV Bumper Replacement Kit # MNT63VR is a glossy black, powder coated finish. This is pretty standard for RV products and it will be more durable than just a standard paint. view full answer...
I spoke with Curt and they informed me that the thickness of the metal that the RV Hitch part # E-100 is .25 of an inch and the material is mild steel. The hitch has a 3,500 lb trailer towing capacity as well. I attached a review video for the hitch for you to check out as well. view full answer...
The Kwikee T-Style Door Holder for RVs - 6" Long # LC381411 is constructed from plastic. This same holder is also available with a rubber bumper at part # LC381412, which is great because that bumper will keep your door from hitting your RV so that's definitely the way I would go.
I have added a link to a video review for you to check out as well. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75101 you were looking at is designed in the USA but produced in Mexico.
If you are wanting a trailer hitch receiver made in the USA I have a few options.
I recommend the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25132 as it is the only USA made trailer hitch receiver for your 2000 Dodge Ram Pickup that does not require drilling and will fit both long and short bed models with the standard or step rear bumper.
If you are ok with an... view full answer...
The license plate bracket (Part C) of the Hopkins Smart Hitch Backup Camera # HM50002 is made of 1/2 inch plastic so cutting it wouldn't cause any camera issues. Although it might not be necessary. The camera can easily be detached from the bracket and the sensors can be too using a screw driver. So it might work better for you to install it this way. view full answer...
All the hitches we offer for your 2008 Volvo XC90 use square tube construction. No drilling, trimming or vehicle modification will be required, the hitch bolts to existing holes in the vehicle. The nice thing about the design of the hitch is that the cross tube is concealed behind the bumper, so the receiver tube is the only visible portion of the hitch.
The two hitches available are pretty similar, visually speaking but the Draw-Tite # 75152 has a higher tongue weight capacity (maximum... view full answer...
The material in the Adco SFS AquaShed Cover for Bumper Pull Horse Trailer - 14' Long # 290-46003 is waterproof. The top layer will bead water on contact and the sides are polypropylene. Any moisture that finds its way into this cover via humidity for example will not be trapped because this cover's material is breathable to eliminate mold and mildew. It comes with a storage bag and a 2 year manufacturer's warranty. view full answer...
If your 2015 Chevrolet Equinox has a factory tow package, there should be a trailer connector at the rear of the vehicle, behind the rear bumper. The connector could also be inside a black box that is mounted under the vehicle. If this is present, then your Equinox almost definitely has a factory tow package.
Another way to be sure is to simply take your VIN number to a local Chevrolet dealer and they will be able to tell you exactly what was installed in the factory for your vehicle. view full answer...
The New York Giants NFL Sport Plate - 3D License Plate # NSP120 does not have any rust-resistant coating on it so you would want to try to keep it out of the rain if possible since it has a zinc alloy finish.
You can protect it from the elements using a license cover plate like the Stainless Steel # WT60027. This part also comes in White # WT8ALPCC8, Black # WT60020, and a variety of different colors which you can find on the linked product page. view full answer...
Although the Pro Series # 63153 is manufactured overseas in China, as you can see by reading the reviews the product received, it's very highly rated by our customers.
We do have two carriers made in the USA. They are both enclosed carriers. They are very high quality, but they are much more expensive. We have the the LetsGoAero models # H00604 and # HGK819.
Before choosing a carrier, you'll want to determine how much clearance exists between the hitch pin hole in your receiver and... view full answer...
Go To Results