We do have the Valterra RV Sewer Hose Carrier # A04-3460BK which can adjust from 34" to 60" and will allow you to carry your sewer hose in a protected tube.
If you have a longer hose, you can use the Valterra RV Sewer Hose Carrier # A04-5094BK which adjusts from 50" to 94". view full answer...
Which waste valve you'll need for your black water tank on your RV depends on the fitting that you have on your vehicle currently. As an example, if you have a male threaded hose that fits over the waste valve you'll want to use the Valterra Waste Valve for RV Black Water Tank - 3" MPT to 3" Lug # T50C. I've linked our selection of waste valves to this answer that will allow you to choose the appropriate connection. It is recommended that you use Valterra ABS Solvent # A05-0303 to complete... view full answer...
The parts included with the Camco RhinoFLEX RV Sewer Hose # CAM39761 will include two storage caps and a 4 in 1 adapter.
Here is a breakdown of everything included:
1 15 foot long hose
1 bayonet fitting.
2 storage caps.
1 elbow fitting.
1 4-in-1 dump station adapter.
You can obtain a RhinoFLEX sewer hose 5-foot extension with swivel lug and bayonet fittings # CAM39765, storage caps # CAM39753 (1 bayonet and 1 elbow fitting) separately if needed. The adapter is currently not available... view full answer...
You have the Lippert Waste Master Camlock Connector on your 2018 Forest River Forester so for a single hose setup you need the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle # LC359724 to dump your tanks. This comes with a 20' sewer hose but if you end up needing more length than that you can use the kit # LC360784 which comes with a dual Camlock Coupler and another 20' length of hose (when expanded).
With that being said, it looks like the previous owners... view full answer...
It sounds like you're looking for the parts you need to dump the black water tank on your RV. You should already have a waste valve connection in place with bayonet fittings on it so you will only need a sewer hose like the RhinoFLEX RV Sewer Hose w Swivel Fittings # CAM39761. This hose has a 4 prong bayonet fitting that firmly secures to the RV black-water tank and will allow you to dump your tank. This hose comes with an adapter that will allow you to fit it on 3" slip or 3", 3-1/2" and... view full answer...
We do have a hose similar to the 3 foot RhinoFLEX RV Sewer Hose # CAM39768 that has a bayonet fitting on one end and a lug fitting on the other end.
The Camco RhinoEXTREME # CAM39855 is similar to the RhinoFLEX that you mentioned except it is a 2 foot extension hose. If you are needing this for a dump station then you can use the Revolution RV Sewer Hose Swivel Elbow # CAM39471 as well for the 90 degree piece with the dump station adapter. view full answer...
The 5" diameter thin wall drain pipe you pair with the Valterra RV Sewer Hose Storage Hatch w/ Lock, White # D04-0471VP or Black # D04-0471BKVP, is something that needs to be picked up from your local hardware or home improvement store. view full answer...
I believe we have exactly what you're looking for, for your 1991 Provost RV.
Take a look at the:
-EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting # F02-3112CL.
This is a clear 90° fitting that will fit onto a standard 3" lug fitting, and will also fit 3" slip and 3", 3-1/2", and 4" threaded sewer inlets.
Attached is a review video for you to check out as well. view full answer...
Yes you can absolutely use PVC for your septic tank cleanout. I recommend checking out the:
-SewerSolution Macerator System for RV Waste Tanks # SS01.
This system can pump up to 100 feet on flat ground, however it is recommended to connect a hard PVC to the included hose for distances over 30'.
This included hose measures 10' long, so you'd need to connect the hose to the PVC using a 1" coupler for the remaining 110'. view full answer...
While we do not have what you're looking for, but if storage is the issue, then you can just trim the excess of the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle # LC359724 and glue the pieces back together with the Valterra ABS Solvent Cement # A05-0303.
This will allow you to trim the hose down to a manageable length for your RV and still allow you to use it.
Attached are a couple of videos for you to check out as well.
If you're after something different,... view full answer...
No, The SilverBack RV Sewer Hose # D04-0650 does not come with end caps, but you can add them with part # T1020.
The cap has a twist-on installation with bayonet hooks. It has an internal seal that helps prevent leakage. It has an ABS plastic construction.
I attached a review video link below. view full answer...
The RhinoFLEX RV Sewer Hose Kit # CAM39768 that you referenced does not require a specific portable tank. As long as your tank has the standard 3" opening with a lug fitting this will work great.
If you are needing a portable wastewater tank, I have 11 Gallon tank which is part # TNS25606 on our site. I have attached a review video. view full answer...
Yes there is, you can use the Lippert Tote Tank Adapter # LC360789 so that you don't have to remove your bayonet fitting to use the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle # LC359724. view full answer...
Since sewage connectors do need a proper seal (typically by using solvent # A05-0303) I do recommend changing out some of your sewage pipes as they are looking a bit rough.
It does look like you have a 3" round pipe from your photo so if you were to keep your current system you could possibly use a Fernco rubber sleeve to connect the Valterra Coupling # F02-2025BK to either an extension or to the Valterra Bladex Waste Valve # T50. If you need an extension you will put this waste valve... view full answer...
I might have a solution for you, however, we do not have a 60' hose like requested. Instead, we have the EZ Flush Replacement RV Sewer Hose with 3" Bayonet Fitting # D04-0087 which is 15 mil thick, and is 20' long. With this hose, you'll need # 344633703 to connect to your RV's cleanout, and use # T1028 on the smooth end of # 344633703. This setup will allow you to connect # D04-0087 to your RV's cleanout.
Additionally, you will need some solvent cement # A05-0303 to secure # 344633703... view full answer...
It sounds like you're going to need the Valterra Eccentric Tank Reducer # T1041-1 which will mount directly to your 3" spigot, while the 1-1/2" hub slides over the sewer pipe.
Now you can connect to the Valterra Waste Valve for RV Gray Water Tank w/ Cap # T1001C, like you mention.
From here, you can attach the Valterra Gray Water Drain Connector # T01-0094VP for the 3/4" hose connection, or you can use # T01-0091VP if you want a 90° angle 3/4" hose connection.
We have various hoses... view full answer...
Since we don't have a hose that's 70 feet long, you'll need to piece together a few hoses to get the length you're looking for. From the septic, I'd start with the EZ Coupler # D04-0115 with a 20 inch length and a 90 outlet for the septic tank. Then, I'd add 5 of the # D04-0200 hose extensions.
The hoses use the typical bayonet/lug fittings that are compatible with the standard 3 inch lug fitting on your RV waste valve. view full answer...
The specific fittings and valves you need will ultimately depend on the kind of grey water tank that you plan on adding to your enclosed trailer. If there are threaded fittings or specific diameter openings on your tank, you will need to find the compatible fittings.
For a waste valve you can use something like the Valterra Twist on Waste Valve # T58. This will not be glued on because it is designed to attach to the RV side and the waste tube with bayonet adapters like the Valterra #... view full answer...
To replace your sewer and drain hose like # D04-0120PB, you will just need to disconnect the hose from your waste valve and replace with a new hose.
This hose also has an internal seal that will prevent leaking, has a diameter of 3", and has an length of 120".
Attached is a review video for you to check out as well. view full answer...
It sounds like you might want to have a look at the Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466ND13AAR, which would allow you to dump your black and gray water tanks from the same hose. This elbow fitting connects to the 3" hub on your black water drain pipe and the 1-1/2" hub on your gray water tank, and allows you to use the # F02-3112CL with your 3" spigot connection hose.
You'll need to remove your old valves to install the Bristol Double... view full answer...