For your boat with a 68 inch beam the part Classic Accessories Boat Cover # 052963889185 is going to fit as it can fit beams that are near 75 inches. You will most likely have to remove the trolling motor though. Since they are designed for easy removal that shouldn't be too big of a problem. view full answer...
As long as your boat's beam (width of the widest point) does not exceed the 98 inches, the Classic Accessories DryGuard Boat Cover for 98" Beam # CA20085, it will fit your boat. I would not recommend choosing the larger size as boat covers are meant to fit snug to act as a seal to protect your boat.
However, if your boat beam is a little larger than 98" I would recommend the Classic Accessories DryGuard Waterproof Boat Cover for a 102" Beam # CA20086. This cover will provide the best... view full answer...
The Classic Accessories Boat Cover # 052963889284 referenced in your question is designed to fit boats that are between 14 and 16 feet long. Since your boat measures a bit longer than 16 feet, I recommend going up in length with the Classic Accessories # 052963889383. This is the same style cover as what you were looking at but it fits boats that are between 16 and 18-1/2 feet long. This will likely provide a better fit for your boat and can also work with wider boats with a beam width... view full answer...
I do have an option for you but all of our boat trailer covers are designed to be used with a boat on a trailer or in storage. That said, if you are able to find a way to secure the straps for the cover to the boat while in the water then I do not see any other reason as to why they would not work in this application as well.
In order to make sure we get you the correct cover I would need to know the widest point of your pontoon boat. If it does not exceed 96" then you can use the Classic... view full answer...
I looked up your boat and the 1973 Silverline Comoro could have been 15 feet or up to 19 feet in length.
So depending on what model you have the part # 052963889284 could work but it would have to be 15 or 16 feet in length.
For the version of this cover for 17 to 19 feet you'd need the part # 052963889482. view full answer...
Since the cover gets tightened with straps going with a slightly larger cover would be the way to go as it would make the install a bit easier and could be tensioned to fit the boat just fine. Looks like the # CA20086 would be the way to go. view full answer...
Since you have a boat trailer you are going to need trailer lights that are submersible.
For a light kit that would work well on your trailer that has LED lights I would recommend the part # TLL9RK. I attached an install video for you to check out as well.
If you are looking for any other specific accessories for you trailer e-mail me back and I will help you pick them out. view full answer...
For a 17 foot boat like your Boston Whaler Montauk that most likely has bow rails the Classic Accessories Boat Cover # 052963889383 would be an excellent option since it can fit boats from 16 to 18-1/2 feet in length. view full answer...
For a 17 foot boat like your Boston Whaler Montauk that has bow rails the Classic Accessories Boat Cover # 052963889383 would be an excellent option since it can fit boats from 16 to 18-1/2 feet in length. view full answer...
I do have an option for you but the bunk boards on the CE Smith Multi Sport Plus Boat and Kayak Trailer part # CE48870 would be much too large for use with rooftop mount accessories. The best option we have to convert this trailer for carrying rooftop mounted accessories is with the Malone Crossbar Conversion Kit part # MPG475 which you'd need to find a way to attach. view full answer...
For a 17 foot boat like your Boston Whaler Montauk that most likely has bow rails the Classic Accessories Boat Cover # 052963889383 would be an excellent option since it can fit boats from 16 to 18-1/2 feet in length.
This would not cover the outboard motor though. view full answer...
Sounds like the 12 volt accessory and brake output circuit are not active on your boat trailer's 6-way wiring which means any 7-way to 6-way adapter like the part # 37575 would work great. view full answer...
Yes you definitely could mount the 2.5-Watt Solar Battery Charger # PTW2997 on your boat to keep the accessories you mentioned's battery topped off. view full answer...
Based on my research your 1993 Boston Whaler Montauk has a total length of 17 feet and a beam width of 74 inches. I do recommend verifying this in case you have a slightly different model.
For a boat of this size the Classic Accessories Boat Cover # 052963889383 should work nicely. This cover fits boats that are 16 to 18-1/2 feet long and have a beam width of up to 98 inches. It is constructed of high strength polyester 600D Marine Canvas and it will do a great job of protecting the boat... view full answer...
I looked up some specs on your Duffy Classic 16 and found that it measures 16 feet 5 inches in length and has a beam of 7 feet 4 inches. With the top off of your boat the Classic Accessories part # 052963889383 would work well since it is sized for your boat.
This cover is made of high strength polyester StormPro 600D Marine Canvas, and is designed for durability, weather resistance, mildew resistance, and protection against U.V. damage. The canvas is also treated for maximum water resistance... view full answer...
We have spoken with our contacts at Classic Accessories about fitting their covers to deckboats like your 2009 Hurricane 202 OB deck boat and they have stated that they will fit. So for yours that is right at 20 feet you would want the part # 052963889581.
A breathable fabric wouldn't be waterproof so this would not be considered breathable but it is mildew resistant. That is why we don't offer a breathable solution. view full answer...
Your 2008 Mako 2201 is 21 foot 3 inches long and has a beam width of 7 foot 9 inches. That would work perfectly with the Classic Accessories DryGuard Waterproof Boat Cover # CA20087 that you referenced so I would recommend it for you. view full answer...
Because you want to use while towing your boat and for a bike carrier, I recommend the Roadmaster Quiet Hitch For 2 Inch Trailers, Item # RM-061. This hitch immobilizer helps eliminate rattle and sway and works with ball mounts, tow bars, and hitch-mounted accessories like a bike rack. It also has a simple bolt-on installation. In order to use this immobilizer, you must have a hitch receiver that has a ring or collar around it.
If your hitch receiver does not have a collar, I recommend... view full answer...
The covers like the Classic Accessories Hurricane Fishing Boat Cover # 052963889383 will work on bass boats like yours, but you will need to consider your trolling motor when you install the cover. You would either want to remove the trolling motor before you install the cover or come up with a way to protect the cover from the blades of it.
Some people will use an old deflated basketball to place over the blades of the motor before you install the cover.
From the research I did it looks... view full answer...
I recommend the Dutton-Lainson Boat Trailer Deluxe Roller Bunk # DL21740 with their 2,500lb capacity per set over the CE Smith # CE27700. With them only having a 1,500lb capacity limit per set I would not feel comfortable using them on your boat.
The majority of the weight will tend to be on the rear of the boat. I would fear the rear set of rollers becoming damaged as they might be very close to their limit by the time you add any other gear or accessories to the boat. view full answer...