bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Toyota RV Cargo Carrier


  • Spare Tire Mount For RV Cargo Carrier.
  • You can use the Spare Tire Carrier for Yakima Roof Cargo Baskets - Lockable # Y07076. It can be used in, underneath or mount to the rear of your cargo carrier. If you have a cargo carrier that mounts via hitch receiver I recommend the Roadmaster Spare Tire Carrier # RM-195125. This gives you a spare tire mounting location without sacrificing your hitch receiver. This will lower tongue capacity by 33 percent. If you need a bumper mount use the Ultra-Fab Folding Spare Tire Carrier for Trailers...
    view full answer...

  • Recommendation for Using Cargo Carrier Between RV and Towed Vehicle
  • In order to secure a cargo carrier between your RV and towed vehicle, you will just need to start with the Roadmaster Dual Hitch Receiver Adapter # RM-077-4. This will slide right into the 2 inch hitch on your RV and provides two, 2 inch receivers on the other end. The bottom receiver will be used for your tow bar, while the top receiver can be used for a hitch-mounted accessory like a cargo carrier. Once this is in place, it is just a matter of choosing a cargo carrier that works well...
    view full answer...

  • Is the Curt Aluminum Cargo Carrier RV Approved?
  • Our carrier is rated for highway speeds so you won't have any issues there. We do not recommend using our Aluminum Cargo Carrier # e98991 on the back of an RV. If you want to have a cargo carrier for your Forest River Sunseeker Motorhome, we make one specifically for RV Bumpers. 24x60 etrailer Cargo Carrier for RV Bumper Part # e99049. This one is rated for highway speeds as well but is RV approved.
    view full answer...

  • Can the Curt RV Bumper 2" Trailer Hitch Receiver Be Used to Carry a Scooter
  • The Curt Adjustable Trailer Hitch Receiver part # C13701 is going to be the better option for your cargo carrier and scooter. The Curt RV Bumper 2" Trailer Hitch Receiver part # E-100 that you referenced does indeed have a 350 lb tongue weight rating however, the bumper on your RV is likely less. You can check this by contacting the manufacturer but I do believe the Curt Adjustable Trailer Hitch Receiver would be better suited for your application. Please keep in mind that if you are...
    view full answer...

  • 2021 Forrest River 2883WS Cargo Carrier Recommendation
  • For your 2021 Forest River 2883WS I would recommend a hitch mounted cargo carrier over a bumper cargo carrier, as Forrest River does not recommend mounting anything the the bumper although people have done it in the past with no issues. Because of this reason, I recommend using something like the 24x60 Reese Cargo Carrier for 2" Hitches # 63153. This carrier is 24x60" which is slightly smaller than the 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR you referenced. However, these two...
    view full answer...

  • Can Cargo Carrier be Used Behind an RV
  • There is a cargo carrier you can use on an RV but it is recommended it be one with a completely solid shank as opposed to one which folds and tilts; the reason for that is the amount of movement at the rear of an RV will be much greater than the back of a passenger vehicle and a solid shank will give your carrier the added stability to handle that much movement. The cargo carrier I recommend is the Curt Cargo Carrier # C18152 because like the etrailer.com Cargo Carrier it measures 60"...
    view full answer...

  • Cargo Carrier Light Kit for etrailer Cargo Carrier
  • For the 24x84 etrailer Cargo Carrier for RV Bumper, # e96ZR I recommend the Cargo Carrier Light Kit, # 52014. Use 48" Car and Trailer End Loop 4-Pole, # 18044 for an extension if needed.
    view full answer...

  • Enclosed Cargo Carrier Recommendation for Mercedes Benz Sprinter RV
  • Not all enclosed cargo carriers are approved for use at the rear of an RV like the part # M2205-01-02 that you referenced but I do have a great solution for you that is. You'd want the GearDeck 17 Enclosed Cargo Carrier part # H00604 which is RV approved and will work well. This can carry up to 17 cubic feet of storage space and has a 420 lb capacity. I attached a picture of what the carrier looks like installed on an RV as well as an install video for more info as well.
    view full answer...

  • Hitch Cargo Carrier Recommendation for Use Behind an RV
  • The Stromberg Carlson Cargo Carrier part # CC-100 is approved for use behind an RV like what you have. For a hitch lock that also takes out the movement of the carrier in the hitch you then would want the part # 63232.
    view full answer...

  • Recommended Spare Tire Holder for RV Bumper Cargo Carrier
  • The 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs # e99049 you referenced doesn't have a specific spare tire holder. The Buyers Products Spare Tire Carrier # 3375201010, the Fulton Economy Spare Tire Carrier with Lock # FETCHL0700, or the Erickson Spare Trailer Tire Bracket Kit # EM77316 are options you could make work with that carrier. I'd go with the Buyers Product option because it offers support over a longer area.
    view full answer...

  • Cargo Carrier Recommendation for Use Behind RV
  • At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the rear of the trailer which exaggerates the movement of the trailer when hitting bumps. Because of that only a few cargo carriers were designed to be reinforced enough for that type of use. The Stromberg Carlson Cargo Carrier part # CC-100 is approved...
    view full answer...

  • Is There a Spare Tire Mount for the 24x84 etrailer Cargo Carrier for RV Bumper
  • The 24x84 etrailer Cargo Carrier for RV Bumper part # e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create this. If you want to try and recreate this you're welcome to but we don't have any advice for this. The only thing I can recommend is to set the tire inside the basket and strap it down or go with a smaller size so you can retain a bumper mount. The...
    view full answer...

  • Cargo Carrier that Converts to a Bike Carrier for a Windsport 29M RV
  • I don't recommend using the 24 x 60 etrailer Cargo Carrier, part # e98874 behind an RV, because its a folding carrier. The distance from the rear axle of the RV to the hitch is much greater than on a passenger vehicle, and this causes there to be greater force applied to the carrier, and unless specifically designed for it, can break through the hitch pin over time and suddenly fold down, or break the folding mechanism. Instead, I recommend the Stromberg Carlson 23 x 60 carrier, part #...
    view full answer...

  • Recommended Cargo Carrier and Mounting Brackets For a 2021 KZ Connect Travel Trailer Camper
  • For your 2021 KZ Connect I recommend using one of our etrailer RV Cargo Carriers. They are available in different sizes for the size of the gear you wish to carry. Do be sure to contact your KZ dealer to determine how much weight your rear bumper can support and do not exceed the manufacturer rating. All of these carriers are rated for a maximum weight capacity of 500lbs. 24x40 etrailer Cargo Carrier # e99050 24x60 etrailer Cargo Carrier # e99049 24x64 etrailer Cargo Carrier # e83YR 24x84...
    view full answer...

  • Recommended RV Cargo Carrier with a 500-LB Capacity
  • It sounds like you're looking for an RV cargo carrier for an 8" bumper that's 24x36" with a 500-lb capacity. I have a possible solution for you. First, though, the only bumper-mounted cargo carrier we carry that closely matches the dimensions and capacity is the etrailer Cargo Carrier, part # e99050. It is 24x40" and has a 500-lb capacity. However, it only fits 4x4 or 4-1/2x4" bumpers. A better option may be to install a hitch on your RV and use a hitch-mounted cargo carrier. For the...
    view full answer...

  • Best Cargo Carrier for Generator on an RV
  • I would love to help but finding a cargo carrier with everything you need is going to be an extremely difficult task. The main issue is going to be size/weight. Most cargo carriers that can accommodate the 27.6" depth of your generator are not going to be under 50 lbs. Also, only cargo carriers with a fixed shank can be used on the back of an RV due to the added stress. Therefore, the only cargo carrier we offer that will allow you to carry the Honda EU7000iS Inverter Generator on the...
    view full answer...

  • How to Carry a Trailer Hitch Mounted Cargo Carrier and Bike Rack Together at the Back of an RV
  • What you can do in order to carry both a bike rack and a cargo carrier is to use Curt Dual Receiver, # D-192. This receiver fits in a 2 inch trailer hitch and has two 2 inch receivers. It has a tongue weight capacity of 350 pounds. The bike rack, bikes, cargo carrier and contents all will count against the tongue weight. You will also want to make sure you are using a bike rack that is rated for use behind a motor home or trailer. I have included a link to all of the bike racks that we...
    view full answer...

  • RV Cargo Carrier Recommendation for Carrying Moped and Possibly 2 Bikes
  • The Stromberg Carlson Cargo Carrier part # CC-100 is approved for use behind an RV like what you have. This has a capacity of 500 lbs so unless your moped weighs quite a bit this would do a great job.
    view full answer...

  • Best Cargo Bag for 24 x 40 etrailer Cargo Carrier for RV Bumper
  • I can definitely help you out with a cargo bag to use with the nifty 24 x 40 etrailer Cargo Carrier for RV Bumper # e99050. The best option for this is going to be the etrailer Cargo Bag with Mounting Straps # e98990. There are a number of reasons why I really like this bag, starting with its size. It is 40 inches wide and 20 inches deep so it is going to be a perfectly snug fit with the 40 inch wide x 24 inch deep cargo carrier. Other bags that are wider won't allow you to fully utilize...
    view full answer...

  • Cargo Carrier Solution Recommendation for RV with Only Bumper at Rear and no Hitch
  • If you have a 4 inch continuously welded bumper the Curt RV hitch part # E-100 would be a great place to start and then you could use a hitch cargo carrier. The Stromberg Carlson Cargo Carrier part # CC-100 is approved for use behind an RV like what you have. For a hitch lock that also takes out the movement of the carrier in the hitch you then would want the part # 63232.
    view full answer...